References
- A. Belhadi, Y.B.M. Sha’ri, F.E. Touriki, and S. El Fezazi, “Lean production in SMEs: literature review and reflection on future challenges,” J. Ind. Prod. Eng., vol. 35, no. 6, pp. 368-382, 2018, doi: 10.1080/21681015.2018.1508081.
- A. Sabah, L. Al-Kindi, and Z. Al-Baldawi, “Adopting Value Stream Mapping as a Lean Tool to Improve Production Performance,” Eng. Technol. J., vol. 41, no. 6, pp. 1-14, 2023, doi: 10.30684/etj.2023.136269.1307.
- S. Ghushe and S. Deshmukh, “Study : Implementation of Lean Manufacturing Tools on a Coir Product Manufacturing Industry,” vol. 5, no. 2, pp. 60-65, 2017.
- S. Saini and D. Singh, “Investigating the perceptions of Lean manufacturing practices in Northern India SMEs: an empirical study,” Ind. Eng. J., vol. 13, no. 3, 2020, doi: 10.26488/iej.13.3.1218.
- Z. Al-baldawi, A.E.H. Kassam, and S.S.A. Al-zubaidi, “Assessment of the Interrelationship and the Influence Degree of Lean Dimensions Based on Fuzzy DEMATEL,” Adv. Sci. Technol. Res. J., vol. 17, no. 4, pp. 215-226, 2023.
- A.N.M. Rose, B.M. Deros, and M.N.A. Rahman, “Lean manufacturing perceptions and actual practice among malaysian SME’s in automotive industry,” Int. J. Automot. Mech. Eng., vol. 7, no. 1, pp. 820-829, 2013, doi: 10.15282/ijame.7.2012.2.0067.
- Y. Liu, C.M. Eckert, and C. Earl, A review of fuzzy AHP methods for decision-making with subjective judgements, vol. 161. 2020.
- Ateekh-Ur-Rehman and M. Alkahtani, “Automobile Tire Assessment: A Multi-Criteria Approach,” Eng. Technol. Appl. Sci. Res., vol. 7, no. 1, pp. 1363-1368, 2017, doi: 10.48084/etasr.797.
- G.X. 1 and X.D. 1 Xiaoyong Zhu, Yu Liang, Yongmao Xiao, “Identification of Key Brittleness Factors for the Lean-Green Manufacturing System in a Manufacturing Company in the Context of Industry 4.0, Based on the DEMATEL-ISM-MICMAC Method,” Processes, vol. 11, no. 49, 2023.
- H.S. Kilic, P. Yurdaer, and C. Aglan, “A leanness assessment methodology based on neutrosophic DEMATEL,” J. Manuf. Syst., vol. 59, no. June 2019, pp. 320-344, 2021, doi: 10.1016/j.jmsy.2021.03.003.
- M.B. Kumar, R. Parameshwaran, J. Antony, and E. Cudney, “Framework for Lean Implementation Through Fuzzy AHPCOPRAS Integrated Approach,” IEEE Trans. Eng. Manag., 2021, doi: 10.1109/TEM.2021.3089691.
- W.P. Bueno, G.B. Benitez, E.D.S. Fernandes, and L.P. Godoy, “Fuzzy in Lean To Evaluate the Decision Degree,” Rev. Gestão e Desenvolv., vol. 17, no. 1, p. 04, 2020, doi: 10.25112/rgd.v17i1.1696.
- Seyed Vahid Mirnoori, “Prioritizing Lean Techniques by Employing Multi- Criteria Decision-Making (MCDM): The Case of MCoutinho,” 2020.
- S.N. Sathiya Narayana, P. Parthiban, Anbuchezhian, and R. Dhanalakshmi, “Assessment and implementation of lean and green supply chain in medium scale automobile industries using AHP and Fuzzy TOPSIS,” J. Sci. Ind. Res. (India)., vol. 79, no. 8, pp. 720-726, 2020.
- C. Tayaksi, M. Sagnak, and Y. Kazancoglu, “A new holistic conceptual framework for leanness assessment,” Int. J. Math. Eng. Manag. Sci., vol. 5, no. 4, pp. 567-590, 2020, doi: 10.33889/IJMEMS.2020.5.4.047.
- V. S. A. R. D. M. A. Qadrir, “Empirical assessment of the causal relationships among lean criteria using DEMATEL method,” Benchmarking An Int. J., vol. 23, no. 7, 2016.
- A. Azadeh, M. Zarrin, M. Abdollahi, S. Noury, and S. Farahmand, “Leanness assessment and optimization by fuzzy cognitive map and multivariate analysis,” Expert Syst. Appl., vol. 42, no. 15-16, pp. 6050-6064, 2015, doi: 10.1016/j.eswa.2015.04.007.
- M.M. Ravikumar, K. Marimuthu, and P. Parthiban, “Evaluating lean implementation performance in Indian MSMEs using ISM and AHP models,” Int. J. Serv. Oper. Manag., vol. 22, no. 1, pp. 21-39, 2015, doi: 10.1504/IJSOM.2015.070881.
- R. A. M.A. Alemi, “Measuring the leanness of manufacturing systems by using fuzzy topsis: A case study of the ‘parizan sanat’ company,” South African J. Ind. Eng., vol. 24, no. 3, pp. 166-174, 2013, doi: 10.21608/egjec.2013.94997.
- M. Elnadi and E. Shehab, “Product-service system leanness assessment model: study of a UK manufacturing company,” Int. J. Lean Six Sigma, vol. 12, no. 5, pp. 1046-1072, 2021, doi: 10.1108/IJLSS-03-2020-0036.
- D.D. Harjanto and P.D. Karningsih, “Development of Lean Assessment Tools Dimensions and Indicators for MSMEs in Indonesia,” Prozima, vol. 5, no. 1, pp. 21-29, 2021.
- S.S. Dahda, D. Andesta, and A.S. Wicaksono, “Measuring leanness index using fuzzy logic approach,” J. Phys. Conf. Ser., vol. 1469, no. 1, 2020, doi: 10.1088/1742-6596/1469/1/012040.
- N.K. Vishal A Wankhede, Ankur Chaurasia, “Leanness assessment of an organization using fuzzy logic approach,” J. Eng. Pract. Futur. Technol., vol. 2, no. 1, pp. 1-6, 2019.
- V. Yadav, G. Khandelwal, R. Jain, and M.L. Mittal, “Development of leanness index for SMEs,” Int. J. Lean Six Sigma, vol. 10, no. 1, pp. 397-410, 2019, doi: 10.1108/IJLSS-09-2017-0109.
- A. Abreu and C. J. M. F., “A Fuzzy Logic Model to Evaluate the Lean Level of an Organization,” Int. J. Artif. Intell. Appl., vol. 8, no. 5, pp. 59-75, 2017, doi: 10.5121/ijaia.2017.8505.
- L. Rajpurohit, “A Study of Leanness Assessment of Manufacturing Organizations,” 2017.
- R. Agrawal, P. Asokan, and S. Vinodh, “Benchmarking fuzzy logic and ANFIS approaches for leanness evaluation in an Indian SME: A case study,” Benchmarking, vol. 24, no. 4, pp. 973-993, 2017, doi: 10.1108/BIJ-06-2016-0083.
- R. Vidyadhar R. Sudeep Kumar S. Vinodh Jiju Antony, “Application of fuzzy logic for leanness assessment in SMEs: a case study,” J. Eng. Des. Technol., vol. 14, no. 1, 2016.
- P.K. Balasubramanian and K. Hemamala, “Leanness Assessment using Fuzzy Logic Approach: A Case of Indian Horn Manufacturing Company,” Int. J. Data Min. Tech. Appl., vol. 5, no. 2, pp. 102-109, 2016, doi: 10.20894/ijdmta.102.005.002.001.
- V. Başhan and H. Demirel, “Application of Fuzzy Dematel Technique to Assess Most Common Critical Operational Faults of Marine Boilers,” J. Polytech., vol. 22, no. 3, pp. 545-555, 2019, doi: 10.2339/politeknik.426644.
- E.P. and J.J., “An Integrated DEMATEL and AHP approach Multi Criteria Green Supplier Selection Process for Public Procurement,” Int. J. Eng. Technol., vol. 9, no. 1, pp. 113-124, 2017, doi: 10.21817/ijet/2017/v9i1/170901414.
- M.K. And and Shaout, “Fuzzy Consistency Algorithm for Performance Evaluation of Sudanese Universities,” Sixth Int. Arab Conf. Qual. Assur. High. Educ. (IACQA ), vol. 2016, 2016.
- M.K.A. Yousif, “Performance evaluation of sudanese universities and academic staff using fuzzy logic technique,” 2016.
- A. Onay, Ç. Karamaşa, and B. Saraç, “Application of fuzzy AHP in selection of accounting elective courses in undergraduate and graduate Level,” J. Accounting, Financ. Audit. Stud., vol. 2, no. 4, pp. 20-42, 2016.
- H.H. - and C. H. -, “Applying the Fuzzy Analytic Hierarchy Process to Consumer Decision-Making Regarding Home Stays,” Int. J. Adv. Comput. Technol., vol. 5, no. 4, pp. 981-990, 2013, doi: 10.4156/ijact.vol5.issue4.119.
- S.E.I.D. Helmy, G.H. Eladl, and M. Eisa, “Fuzzy analytical hierarchy process ( fahp ) using geometric mean method to select best,” J. Theor. Appl. Inf. Technol., vol. 99, no. 1, pp. 207-226, 2021.
- N.F.M. Nur Syuhaila Abdul Rashid, Nur Amirah Mohd Amin, “Application of fuzzy analytic hierarchy process for contractor selection problem,” GADING J. Sci. Technol., vol. 3, no. 2, pp. 258-276, 2020, doi: 10.4018/978-1-7998-5024-3.ch012.
- Yunus Aydinel, “Investigating Causal Relationship Among Lean Maintenance Factors Using Fuzzy Dematel Method,” 2020.
- S. Altuntas and M. K. Yİlmaz, “Fuzzy dematel method to evaluate the dimensions of marketing resources : an application in SMEs,” J. Bus. Econ. Manag., vol. 17, no. 3, pp. 347-364, 2016, doi: 10.3846/16111699.2015.1068220.
- E. Falatoonitoosi, Z. Leman, S. Sorooshian, and M. Salimi, “Decision-making trial and evaluation laboratory,” Res. J. Appl. Sci. Eng. Technol., vol. 5, no. 13, pp. 3476-3480, 2013, doi: 10.19026/rjaset.5.4475.