References
- “BP Statistical Review of World Energy 2022”, 71 p. pp. 1-57, edition. Available from: https://www.bp.com/content/dam/bp/business-sites/en/global/corporate/pdfs/energy-economics/statistical-review/bp-stats-review-2022-full-report.pdf
- “Framework Convention of the United Nations on climate change”. Adopted on May 9, 1992. Available from: https://www.un.org”climate_framework_conv
- “Kyoto Protocol to the United Nations Framework Convention on climate change”. Adopted on December 11, 1997. Available from: https://www.un.org/ru/documents/decl_conv/conventions/kyoto.shtml
- “United Nations Framework Convention on Climate Change”. FCCC/KP/CMP/2009/18 (Part I), p. 57, 2009. Available from: https://unfccc.int/resource/docs/2009/cmp5/rus/18p01r.pdf
- United Nations. “Report Of The Conference of the parties on its third session”, held at Kyoto from 1 to 11 December 1997, FCCC/CP/1997/7/Add.1, p. 60. Available from: https://unfccc.int/sites/default/files/resource/docs/cop3/07a01.pdf
- United Nations. “Adoption of the Paris Agreements”. FCCC/CP/2015/L.9/Rev.1, Conference of the Parties Twenty-first session, p. 32. Available from: https://unfccc.int/resource/docs/2015/cop21/eng/l09r01.pdf
- J.D. Sutter, J. Berlinger and R. Ellis. “Final draft of climate deal formally accepted in Paris”. Cable News Network; Turner Broadcasting System, Inc; 2015. [updated 14 December 2015]. Available from: https://edition.cnn.com/2015/12/12/world/global-climate-change-conference-vote/
- R. Mendelsohn. “The Role of Markets and Governments in Helping Society Adapt to a Changing Climate”. Climatic Change, vol. 78, iss. 1, pp. 203-215, 2006.
- B. Porfiriev. “Climate Change as a Major Slow-Onset Hazard to Development: An Integrated Approach to Bridge the Policy Gap”. Environmental Hazards, vol. 14, iss. 2, pp. 187-191, 2015.
- I. Kozlov, V. Kovalchuk, O. Klymchuk and L. Prokopovych. “Estimates of Environmental Impact on the Environment During Energy Generation”. Lecture Notes in Civil Engineering, 290 LNCE, pp. 195-204, 2023.
- O. Klymchuk, A. Denysova, G. Balasanian, L. Ivanova and O. Bodiul. “Enhancing efficiency of using energy resources in heat supply systems of buildings with variable operation mode”. EUREKA, Physics and Engineering, vol. 3, pp. 59-68, 2020.
- N. Zubova and S. Mitrofanov. “Renewable energy sources: water flow and wind energy”. Novosibirsk State Technical University, 2021. ISBN 978-5-7782-4465-8
- A. Mazurenko, A. Denysova, A. Klymchuk, N.M. Hieu and P. Kotov. “Exergy characteristics of biogas power units”. Eastern-European Journal of Enterprise Technologies, vol. 1, no. 8, pp. 7-12, 2014.
- A. Mazurenko, A. Klimchuk, O. Shramenko, O. and O. Syshova. “Comparative analysis of decentralized heating systems of residential buildings with the use of electricity”. Eastern-European Journal of Enterprise Technologies, vol. 5, no. 8, pp. 21-25, 2014.
- EU Commission. “Technical assessment of nuclear energy with respect to the ‘do no significant harm’ criteria of Regulation (EU) 2020/852 (‘Taxonomy Regulation’)”. European Commission Joint Research Centre, Petten, JRC124193, 2021. Available from: https://finance.ec.europa.eu/system/files/2021-03/210329-jrc-report-nuclear-energy-assessment_en.pdf
- S. Schlömer, T. Bruckner, L. Fulton, E. Hertwich, A. McKinnon, D. Perczyk, J. Roy, R. Schaeffer, R. Sims, P. Smith and R. Wiser. “Technology-specific cost and performance parameters, Annex III”. pp. 1329-1356, 2014. https://archive.ipcc.ch/pdf/assessment-report/ar5/wg3/ipcc_wg3_ar5_annexiii.pdf?fbclid=IwAR1or1Ih5vzA6C6Rg2E7S2lk0HFtZq-JTDgC5AFLNCffHb5RrdOoGt85SIY
- “Nuclear energy: myths and reality”, 2nd ed. Representative Office of the Heinrich Bell Foundation in Ukraine and Eco-Club (Rivne) R 352. Available from: https://ua.boell.org/sites/default/files/mythos_atomkraft_2_small_rus.pdf-book
- AEA. “Power Reactor Information System (PRIS)”. Database on Nuclear Power Reactors. Available from: https://pris.iaea.org/PRIS/home.aspx
- J.W. Roberts. “If Nuclear Energy Is the Answer, Why Doesn’t Everyone Agree?” Physics Education, vol. 53, iss. 2, 2018. Available from: URL: http://doi.org/10.1088/1361-6552/aa9f7c
- K.O. Dyadyura and F. Sukhodub. “Magnesium-based matrix composites reinforced with nanoparticles for biomedical applications”. Proceedings of the 2017 IEEE 7th International Conference on Nanomaterials: Applications and Properties, NAP 2017, 04NB14, 2017.
- K. Dyadyura, T.P. Hovorun, O.V. Pylypenko, M.V. Hovorun and V.I. Pererva. “Influence of roughness of the substrate on the structure and mechanical properties of TiAlN nano-coating condensed by DCMS”. Proceedings of the 2017 IEEE 7th International Conference on Nanomaterials: Applications and Properties, NAP 2017, 01FNC10, 2017.
- G.V. Averin. “System dynamics”. Donetsk: Donbass publ., 405 p., 2014.
- K.A. Dyadyura, K.V. Berladir, P.V. Rudenko, O.A. Budnik and V.A. Sviderskij “Research of properties of composite material based on polytetrafluoroethylene filled with carbon fiber with titanium nanocoating”. Proceedings of the 6th International Conference Nanomaterials: Applications and Properties, NAP 2016 14-19 September (2016), vol. 5, no. 2, 02NNSA04.
- Т.P. Hоvоrun, O.V. Pylypenko, M.V. Hovorun and K.O. Dyadyura “Methods of obtaining and properties of wear-resistant coatings Ti and N and Ti, Al and N”. J. Nano-Electron. Phys., vol. 9, no. 2, 02026, 2017.
- I.S. Konstantinov and A.V. Zvyagintseva. “Integrated Assessment of the Condition of Urbanized Areas”. City Building and architecture, vol. 8, No. 1, pp. 63-71, 2018.
- L.F. Sukhodub and K. Dyadyura. “Design and fabrication of polymer-ceramic nanocomposites materials for bone tissue engineering”. J. of Nano- and Electronic Physics, vol. 10, no. 6, 06003, 2018.
- I. Kozlov, V. Kovalchuk, O. Klymchuk, O. Dorozh, A. Sigal, I. Aksyonova and Yu. Elkin. “Assessing the Region’s Energy Provision”. Eastern-European Journal of Enterprise Technologies, vol. 2, no. 8, pp. 13-20, 2022.
- O. Voznyak, Y. Yurkevych, O. Dovbush and Y. Serediuk. “The Influence of Chairs and Passengers on Air Velocity in Bus Passenger Compartment”. Lecture Notes in Civil Engineering, vol. 47, pp. 518-525, 2020.
- I. Pandova, A. Panda, J. Valicek, M. Harnicarova, M. Kusnerova and Z. Palkova. „Use of sorption of copper cations by clinoptilolite for wastewater treatment.” International Journal of Environmental Research and Public Health, vol. 15, no. 7, 1364, 2018.
- J. Macala, I. Pandova and A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases.” Mineral Resources Management, vol. 33, no. 1, pp. 125-137, 2017.
- J. Jurko, M. Gajdos and A. Panda. “Study of changes under the machined surface and accompanying phenomena in the cutting zone during drilling of stainless steels with low carbon content.” Metalurgija, vol. 50, no. 2, pp. 113-117, 2011.
- M. Harnicarova, J. Valicek, M. Kusnerova, J. Kmec, Z. Palkova, I. Kopal, J. Krmela and Panda A. “Study of the influence of the structural grain size on the mechanical properties of technical materials.” Materialwissenschaft und Werkstofftechnik, vol. 50, no. 5, pp. 635-645, 2019.
- L. Sukhodub, A. Panda, K. Dyadyura, I. Pandova and T. Krenicky. “The design criteria for biodegradable magnesium alloy implants.” MM Science Journal, vol. December, pp. 2673-2679, 2018.
- I. Pandova, M. Rimar, A. Panda, J. Valicek, M. Kusnerova and M. Harnicarova. “A study of using natural sorbent to reduce iron cations from aqueous solutions.” International Journal of Environmental Research and Public Health, vol. 17, no. 10, 3686, 2020.
- A. Panda, M. Prislupcak and I. Pandova. “Progressive technology diagnostics and factors affecting machinability.” Applied Mechanics and Materials, vol. 616, pp. 183-190, 2014.
- A. Panda, V.M. Anisimov, V.V. Anisimov, K. Dyadyura and I. Pandova. “Increasing of wear resistance of linear block-polyurethanes by thermal processing methods.” MM Science Journal, vol. October, pp. 4731-4735, 2021.
- L. Sukhodub, A. Panda, L. Suchodub, M. Kumeda, K. Dyadyura and I. Pandova. “Hydroxyapatite and zinc oxide based two-layer coating, deposited on Ti6Al4V substrate.” MM Science Journal, vol. December, pp. 3494-3499, 2019.