Modular-Based Multifunctional Product Design Made from Furniture Waste Toward the Circular Economy: Case in Indonesia
References
- Z. Salim and E. Munadi, “Info Komoditi Furnitur,” Badan Pengkaj. dan Pengemb. Perdagang. Kementeri. Perdagang. Republik Indones., 2017.
- Pijar Sukma, “4 Greatest Asian Exporting Countries for (Wooden) Furniture Manufacture,” 2020. https://pijarsukma-furniture.com/furniture-manufacturers-asia/ (accessed Dec. 12, 2023).
- N. Chang, “2022 Global Wooden Furniture Export Summary,” 2022. https://www.ptgofada.com/post/2022-global-wooden-furniture-export-summary (accessed Dec. 12, 2023).
- S. Nurkomariyah, M. Firdaus, D.R. Nurrochmat, and J.T. Erbaugh, “Questioning The Competitiveness of Indonesian Wooden Furniture in The Global Market,” IOP Conf. Ser. Earth Environ. Sci., vol. 285, no. 1, p. 012015, May 2019, doi: <a href="https://doi.org/10.1088/1755-1315/285/1/012015." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1088/1755-1315/285/1/012015.</a>
- AMKRI, “Roadmap Industri Mebel dan Kerajinan Indonesia ‘Target Pencapaian Ekspor 5 Milyar USD, Jakarta, 2015.
- Ministry of Industry, “Data Statistik Industri Furnitur,” 2017.
- KLHK, “Statistik Kementerian Lingkungan Hidup Dan Kehutanan 2014.”, Jakarta, 2015.
- A.C. Ewasechko, Upgrading the Central Java wood furniture industry: a value-chain approach. ILO-SRO, 2005.
- O. Panchenko, M. Domashenko, O. Lyulyov, N. Dalevska, T. Pimonenko, and N. Letunovska, “Objectivation of the Ecological and Economic Losses from Solid Domestic Waste at the Heating Enterprises,” Manag. Syst. Prod. Eng., vol. 29, no. 3, pp. 235-241, 2021, doi: <a href="https://doi.org/10.2478/mspe-2021-0029." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.2478/mspe-2021-0029.</a>
- J. Dyczkowska, Y. Bulhakova, Z. Łukaszczyk, and A. Maryniak, “Waste Management as an Element of the Creation of a Closed Loop of Supply Chains on the Example of Mining and Extractive Industry,” Manag. Syst. Prod. Eng., vol. 28, no. 1, pp. 60-69, 2020, doi: <a href="https://doi.org/10.2478/mspe-2020-0010." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.2478/mspe-2020-0010.</a>
- A. Forrest, M. Hilton, A. Ballinger, and D. Whittaker, “Circular economy opportunities in the furniture sector,” Eur. Environ. Bur. Brussels, Belgium, 2017.
- J. Kirchherr, D. Reike, and M. Hekkert, “Conceptualizing the circular economy: An analysis of 114 definitions,” Resour. Conserv. Recycl., vol. 127, pp. 221-232, 2017.
- M.C. Den Hollander, C.A. Bakker, and E.J. Hultink, “Product design in a circular economy: Development of a typology of key concepts and terms,” J. Ind. Ecol., vol. 21, no. 3, pp. 517-525, 2017.
- A. Wiśniewska-Sałek, “Managing a Sustainable Supply Chain-Statistical Analysis of Natural Resources in the Furniture Industry,” Manag. Syst. Prod. Eng., vol. 29, no. 3, pp. 227-234, 2021, doi: <a href="https://doi.org/10.2478/mspe-2021-0028." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.2478/mspe-2021-0028.</a>
- Y. Akao, Quality function deployment: integrating customer requirements into product design. SteinerBooks, 2004.
- J.B. Revelle, J.W. Moran, and C.A. Cox, The QFD handbook. John Wiley & Sons, 1998.
- B. Bergman and B. Klefsjö, Quality from customer needs to customer satisfaction. Studentlitteratur AB, 2010.
- E. Vezzetti, S. Moos, and S. Kretli, “A product lifecycle management methodology for supporting knowledge reuse in the consumer packaged goods domain,” Comput. Des., vol. 43, no. 12, pp. 1902-1911, 2011.
- C. Rao, X. Xiao, M. Goh, J. Zheng, and J. Wen, “Compound mechanism design of supplier selection based on multi-attribute auction and risk management of supply chain,” Comput. Ind. Eng., vol. 105, pp. 63-75, 2017.
- C. Yang, J. Cheng, and X. Wang, “Hybrid quality function deployment method for innovative new product design based on the theory of inventive problem solving and Kansei evaluation,” Adv. Mech. Eng., vol. 11, no. 5, p. 1687814019848939, 2019.
- J. A. Carnevalli and P. C. Miguel, “Review, analysis and classification of the literature on QFD – Types of research, difficulties and benefits,” Int. J. Prod. Econ., vol. 114, no. 2, pp. 737-754, 2008.
- M. Fargnoli and T. Sakao, “Uncovering differences and similarities among quality function deployment-based methods in Design for X: Benchmarking in different domains,” Qual. Eng., vol. 29, no. 4, pp. 690-712, 2017.
- S. Dror, “Improving business objectives by reducing testing in the transition from development to production,” Qual. Reliab. Eng. Int., vol. 36, no. 6, pp. 2108-2118, 2020.
- W. Yang, G. Cao, Q. Peng, and Y. Sun, “Effective radical innovations using integrated QFD and TRIZ,” Comput. Ind. Eng., vol. 162, p. 107716, 2021.
- D. D. Sheu, M.-C. Chiu, and D. Cayard, “The 7 pillars of TRIZ philosophies,” Comput. Ind. Eng., vol. 146, p. 106572, 2020.
- C. Leonid, E. Kalle, and L. Mika, “TRIZ Integration into a Product Design Roadmap,” in Proceedings of the 25th international conference on flexible automation and intelligent manufacturing, 2015, pp. 198-205.
- S.-M. Wu, H.-C. Liu, and L.-E. Wang, “Hesitant fuzzy integrated MCDM approach for quality function deployment: a case study in electric vehicle,” Int. J. Prod. Res., vol. 55, no. 15, pp. 4436-4449, 2017.
- A.A. Bolar, S. Tesfamariam, and R. Sadiq, “Framework for prioritizing infrastructure user expectations using Quality Function Deployment (QFD),” Int. J. Sustain. Built Environ., vol. 6, no. 1, pp. 16-29, 2017.
- T.T. Sousa-Zomer and P.A.C. Miguel, “A QFD-based approach to support sustainable product-service systems conceptual design,” Int. J. Adv. Manuf. Technol., vol. 88, pp. 701-717, 2017.
- C.K.M. Lee, C.T.Y. Ru, C.L. Yeung, K.L. Choy, and W. H. Ip, “Analyze the healthcare service requirement using fuzzy QFD,” Comput. Ind., vol. 74, pp. 1-15, 2015.
- I. Vanany, G.A. Maarif, and J.M. Soon, “Application of multi-based quality function deployment (QFD) model to improve halal meat industry,” J. Islam. Mark., vol. 10, no. 1, pp. 97-124, 2019.
- L. Chechurin and Y. Borgianni, “Understanding TRIZ through the review of top cited publications,” Comput. Ind., vol. 82, pp. 119-134, 2016.
- S. Ren, F. Gui, Y. Zhao, Z. Xie, H. Hong, and H. Wang, “Accelerating preliminary low-carbon design for products by integrating TRIZ and Extenics methods,” Adv. Mech. Eng., vol. 9, no. 9, p. 1687814017725461, 2017.
- H.T. Hsieh and J.L. Chen, “Using TRIZ methods in friction stir welding design,” Int. J. Adv. Manuf. Technol., vol. 46, pp. 1085-1102, 2010.
- C.J. Yang and J.L. Chen, “Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method,” J. Clean. Prod., vol. 19, no. 9-10, pp. 998-1006, 2011.
- V. Nikolić, S. Sajjadi, D. Petković, S. Shamshirband, Ž. Ćojbašić, and L.Y. Por, “Design and state of art of innovative wind turbine systems,” Renew. Sustain. Energy Rev., vol. 61, pp. 258-265, 2016.
- P. Števko, R. Kohár, D. Cechmánek, D. Medvecká, and F. Nový, “Optimization of the Tire Building Drum for Passenger Tires Using the TRIZ Methodology,” Manag. Syst. Prod. Eng., vol. 31, no. 3, pp. 361-372, 2023, doi: <a href="https://doi.org/10.2478/mspe-2023-0040." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.2478/mspe-2023-0040.</a>
- G. Caligiana, A. Liverani, D. Francia, L. Frizziero, and G. Donnici, “Integrating QFD and TRIZ for innovative design,” J. Adv. Mech. Des. Syst. Manuf., vol. 11, no. 2, 2017, doi: <a href="https://doi.org/10.1299/jamdsm.2017jamdsm0015." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1299/jamdsm.2017jamdsm0015.</a>
- T. Kim, H. Lim, and K. Cho, “Conceptual robot design for the automated layout of building structures by integrating QFD and TRIZ,” Int. J. Adv. Manuf. Technol., vol. 120, no. 3-4, pp. 1793-1804, May 2022, doi: <a href="https://doi.org/10.1007/s00170-022-08803-2." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1007/s00170-022-08803-2.</a>
- E.L. Melgoza, L. Serenó, A. Rosell, and J. Ciurana, “An integrated parameterized tool for designing a customized tracheal stent,” Comput. Des., vol. 44, no. 12, pp. 1173-1181, 2012.
- C.-H. Wang, “Incorporating the concept of systematic innovation into quality function deployment for developing multi-functional smart phones,” Comput. Ind. Eng., vol. 107, pp. 367-375, 2017.
- Y.-H. Wang, C.-H. Lee, and A. J. C. Trappey, “Service design blueprint approach incorporating TRIZ and service QFD for a meal ordering system: A case study,” Comput. Ind. Eng., vol. 107, pp. 388-400, 2017.
- F. Li, C.-H. Chen, C.-H. Lee, and L.-P. Khoo, “A user requirement-driven approach incorporating TRIZ and QFD for designing a smart vessel alarm system to reduce alarm fatigue,” J. Navig., vol. 73, no. 1, pp. 212-232, 2020.
- C.H. Yeh, J.C.Y. Huang, and C.K.Yu, “Integration of four-phase QFD and TRIZ in product R&D: a notebook case study,” Res. Eng. Des., vol. 22, pp. 125-141, 2011.
- F. Zhang, M. Yang, and W. Liu, “Using integrated quality function deployment and theory of innovation problem solving approach for ergonomic product design,” Comput. Ind. Eng., vol. 76, pp. 60-74, 2014.
- I. Ekmekci and E.E. Nebati, “Triz Methodology and Applications,” Procedia Comput. Sci., vol. 158, pp. 303-315, 2019.
- T. Bhamra and V. Lofthouse, Design for Sustainability: A Practical Approach. United Kingdom: Routledge, 2007.
- W.R. Stahel, The Performance Economy, 2nd ed. England: Palgrave Macmillan, 2010.
- N.M.P. Bocken, I. de Pauw, C. Bakker, and B. van der Grinten, “Product design and business model strategies for a circular economy,” J. Ind. Prod. Eng., vol. 33, no. 5, pp. 308-320, Jul. 2016, doi: <a href="https://doi.org/10.1080/21681015.2016.1172124." target="_blank" rel="noopener noreferrer" class="text-signal-blue hover:underline">10.1080/21681015.2016.1172124.</a>
- P. Ghisellini, C. Cialani, and S. Ulgiati, “A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems,” J. Clean. Prod., vol. 114, pp. 11-32, 2016.
- M. Tonelli and N. Cristoni, Strategic management and the circular economy. Routledge, 2018.
- T. Cooper, “Product development implications of sustainable consumption,” Des. J., vol. 3, no. 2, pp. 46-57, 2000.
- E. MacArthur, “Towards the circular economy,” J. Ind. Ecol., vol. 2, pp. 23-44, 2013.
- C. Vezzoli and E. Manzini, Design for environmental sustainability. Springer, 2008.
- J.M. Allwood, M.F. Ashby, T.G. Gutowski, and E. Worrell, “Material efficiency: A white paper,” Resour. Conserv. Recycl., vol. 55, no. 3, pp. 362-381, 2011.
- D.W. Hosmer, T. Hosmer, S. Le Cessie, and S. Lemeshow, “A comparison of goodness‐of‐fit tests for the logistic regression model,” Stat. Med., vol. 16, no. 9, pp. 965-980, 1997.
- I. Ghozali, Aplikasi analisis multivariate dengan program SPSS. Badan Penerbit Universitas Diponegoro, 2006.
- R. Ginting and A. Y. Ali, “TRIZ or DFMA combined with QFD as product design methodology: A review,” 2016.
- H.-F. Hung, H.-P. Kao, and Y.-S. Juang, “An integrated information system for product design planning,” Expert Syst. Appl., vol. 35, no. 1-2, pp. 338-349, 2008.
- X. Lai, K. Tan, and M. Xie, “Optimizing product design using quantitative quality function deployment: a case study,” Qual. Reliab. Eng. Int., vol. 23, no. 1, pp. 45-57, 2007.
- S. Vinodh, V. Kamala, and K. Jayakrishna, “Integration of ECQFD, TRIZ, and AHP for innovative and sustainable product development,” Appl. Math. Model., vol. 38, no. 11-12, pp. 2758-2770, 2014.
- K. Purushothaman and R. Ahmad, “Integration of Six Sigma methodology of DMADV steps with QFD, DFMEA and TRIZ applications for image-based automated inspection system development: a case study,” Int. J. Lean Six Sigma, vol. 13, no. 6, pp. 1239-1276, 2022.
- J. Zhang, K.-H. Chai, and K.-C. Tan, “40 inventive principles with applications in service operations management,” TRIZ J., vol. 8, no. 12, p. 1, 2003.
- M. Chaerul and S.A. Rahayu, “Cost Benefit Analysis for Developing Municipal Solid Waste Treatment Facility: Case Study of Pekanbaru City,” J. Nat. Resour. Environ. Manag., vol. 9, no. 3, pp. 710-722, 2019.
- P. Misuraca, “The effectiveness of a costs and benefits analysis in making Federal Government decisions: A literature review,” Cent. Natl. Secur. MITRE Corp., 2014.
- C. Ghinea and M. Gavrilescu, “Costs analysis of municipal solid waste management scenarios: IASI–Romania case study,” J. Environ. Eng. Landsc. Manag., vol. 24, no. 3, pp. 185-199, 2016.
- A. Ahamed, K. Yin, B.J.H. Ng, F. Ren, V.-C. Chang, and J.-Y. Wang, “Life cycle assessment of the present and proposed food waste management technologies from environmental and economic impact perspectives,” J. Clean. Prod., vol. 131, pp. 607-614, 2016.
- V. Martinez-Sanchez, M.A. Kromann, and T.F. Astrup, “Life cycle costing of waste management systems: Overview, calculation principles and case studies,” Waste Manag., vol. 36, pp. 343-355, 2015.
- K. Dobraja, A. Barisa, and M. Rosa, “Cost-benefit analysis of integrated approach of waste and energy management,” Energy Procedia, vol. 95, pp. 104-111, 2016.
Language: English
Page range: 303 - 316
Submitted on: Oct 1, 2023
Accepted on: Jul 1, 2024
Published on: Sep 5, 2024
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year
Keywords:
Related subjects:
© 2024 Diana Puspita Sari, Sri Hartini, Faradhina Azzahra, Pramudi Arsiwi, Riswanda G. Prayoga, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.