References
- Z. Zhang, T. Ren, J. Cheng and J. Zhu. “An Improved Capacity Model of the Cone Crushers Based on the Motion Characteristics of Particles Considering the Influence of the Spatial Compound Motion of the Mantle.” Minerals, vol. 12, art. no. 235, 2022. https://doi.org/10.3390/min12020235
- S. Wu, S. Wang, G. Wang, L. Fan, J. Guo, Z. Liu, H. Zhang, W. Guan, Y. Wang and Y. Wu. “Study on productivity of eccentric roll crusher based on theory and experiment.” Minerals Engineering, vol. 206, art. no. 108500, 2024. https://doi.org/10.1016/j.mineng.2023.108500
- M. Bembenek and P. Wdaniec. “Effect of crusher type and its parameters on the dry granulation of powders [Wpływ rodzaju kruszarki oraz parametrów jej pracy na suchą granulację proszków].” Przemysl Chemiczny, vol. 98, pp. 310-313, 2019. https://doi.org/10.15199/62.2019.2.25
- R. Haigh. “A Decade Review of Research Trends Using Waste Materials in the Building and Construction Industry: A Pathway towards a Circular Economy.” Waste, vol. 1, pp. 935-959, 2023. https://doi.org/10.3390/waste1040054
- S. Kurnosov, L. Ropyak, A. Velychkovych, T. Pryhorovska and V. Vytvytskyi. “Mechanical – Insulating Method of Household and Industrial Waste Utilization,” in New Technologies, Development and Application IV. NT 2021. Lecture Notes in Networks and Systems, vol. 233. I. Karabegović, Ed. Cham: Springer, 2021, pp. 431-441. https://doi.org/10.1007/978-3-030-75275-0_48
- M. Korchemlyuk and L. Arkhypova. “Environmental Audit of Ukrainian Basin Ecosystem of the Prut River.” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 2016, pp. 97-106, 2016.
- W. Bialy, W. Grebski, G. Galecki and W. Kaniak. “Environmental impact of the mechanical coal processing plant.” Acta Montanistica Slovaca, vol. 25, pp. 139-149, 2020. https://doi.org/10.46544/AMS.v25i2.1
- D. Li, Y. Wang, C. Wang and S. Li “Research on the Wear Behavior of the Fixed Cone Liner of a Cone Crusher Based on the Discrete Element Method.” ACS Omega, vol. 5, art. no. 16, 2020. https://doi.org/10.1021/acsomega.0c01272
- Z. Zhang, T. Ren and J. Cheng. “Constant Wear Criterion for Optimization of the Crushing Chamber of Cone Crushers.” Minerals, vol. 12, art. no. 807, 2022. https://doi.org/10.3390/min12070807
- H.M. Nykyforchyn, O.T. Tsyrul’nyk, D.Yu. Petryna, and M.I. Hredil’. “Degradation of steels used in gas main pipelines during their 40-year operation.” Strength of Materials, vol. 41, pp. 501-505, 2009. https://doi.org/10.1007/s11223-009-9158-8
- Z.M. Rykavets, J. Bouquerel, J.-B. Vogt, Z.A. Duriagina, V.V. Kulyk, T.L. Tepla, L.I. Bohun and T.M. Kovbasyuk. “Investigation of the microstructure and properties of trip 800 steel subjected to low-cycle fatigue.” Progress in Physics of Metals, vol. 20, pp. 620-633, 2019. https://doi.org/10.15407/ufm.20.04.620
- L. Ropyak, I. Shatskyi and M. Makoviichuk. “Influence of the oxide-layer thickness on the ceramic-aluminium coating resistance to indentation.” Metallofizika i Noveishie Tekhnologii, vol. 39, pp. 517-524, 2017. https://doi.org/10.15407/mfint.39.04.0517
- I.P. Shatskyi, L.Y. Ropyak and M.V. Makoviichuk. “Strength optimization of a two-layer coating for the particular local loading conditions.” Strength of Materials, vol. 48, pp. 726-730, 2016. https://doi.org/10.1007/s11223-016-9817-5
- L. Ropyak, T. Shihab, A. Velychkovych, O. Dubei, T. Tutko and V. Bilinskyi. “Design of a Two-Layer Al–Al2O3 Coating with an Oxide Layer Formed by the Plasma Electrolytic Oxidation of Al for the Corrosion and Wear Protections of Steel.” Progress in Physics of Metals, vol. 24, pp. 319-365, 2023. https://doi.org/10.15407/ufm.24.02.319
- L. Ropyak, I. Shatskyi and M. Makoviichuk. “Analysis of interaction of thin coating with an abrasive using onedimensional model.” Metallofizika i Noveishie Tekhnologii, vol. 41, pp. 647-654, 2019. https://doi.org/10.15407/mfint.41.05.0647
- I.P. Shats’kyi. “Limiting equilibrium of a plate with partially healed crack.” Materials Science, vol. 51, pp. 322-330, 2015. https://doi.org/10.1007/s11003-015-9845-5
- I.P. Shatskyi, V.V. Perepichka and L.Y. Ropyak. “On the influence of facing on strength of solids with surface defects.” Metallofizika i Noveishie Tekhnologii, vol. 42, pp. 69-76, 2020. https://doi.org/10.15407/mfint.42.01.0069
- T.M. Dalyak and I.P. Shatsky. “On brittle fracture of a body with partial healed star-shaped crack.” Bulletin of Taras Shevchenko National University of Kyiv. Physical and Mathematical Sciences, vol. 2023, pp. 100-103, 2023. https://doi.org/10.17721/1812-5409.2023/2.13
- I.P. Shatskyi, M.V. Makoviichuk and A.B. Shcherbii. “Equilibrium of Cracked Shell with Flexible Coating,” in Shell Structures: Theory and Applications – Proceedings of the 11th International Conference on Shell Structures: Theory and Applications, SSTA 2017, Gdansk, Poland, vol. 4. W. Pietraszkiewicz, W. Witkowski, Ed. London: CRC Press, 2017, pp. 165-168. https://doi.org/10.1201/9781315166605-34
- M. Dutkiewicz, T. Dalyak, I. Shatskyi, T. Venhrynyuk and A. Velychkovych. “Stress Analysis in Damaged Pipeline with Composite Coating.” Appl. Sci., vol. 11, art. no. 10676, 2021. https://doi.org/10.3390/app112210676
- I. Shatskyi, M. Makoviichuk, L. Ropyak and A. Velychkovych. “Analytical model of deformation of a functionally graded ceramic coating under local load.” Ceramics, vol. 46, pp. 1879-1893, 2023. https://doi.org/10.3390/ceramics6030115
- V. Martsinkovsky, V. Yurko, V. Tarelnik and Y. Filonenko. “Designing radial sliding bearing equipped with hydrostatically suspended pads.” Procedia Engineering, vol. 39, pp. 157-167, 2012. https://doi.org/10.1016/j.proeng.2012.07.020
- V. Kotsyubynsky, L. Shyyko, T. Shihab, P. Prysyazhnyuk, V. Aulin and V. Boichuk. “Multilayered MoS2/C nanospheres as high performance additives to lubricating oils.” Materials Today: Proceedings, vol. 35, pp. 538-541, 2019. https://doi.org/10.1016/j.matpr.2019.10.021
- O.P. Gaponova, B. Antoszewski, V.B. Tarelnyk, P. Kurp, O.M. Myslyvchenko and N.V. Tarelnyk. “Analysis of the quality of sulfomolybdenum coatings obtained by electrospark alloying methods.” Materials, vol. 14, art. no. 6332, 2021. https://doi.org/10.3390/ma14216332
- V. Martsynkovskyy, V. Tarelnyk, I. Konoplianchenko, O. Gaponova and M. Dumanchuk. “Technology Support for Protecting Contacting Surfaces of Half-Coupling – Shaft Press Joints Against Fretting Wear,” in Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering, V. Ivanov, et al. Ed. Cham: Springer, 2020, pp. 216-225. https://doi.org/10.1007/978-3-030-22365-6_22
- Y. Kusyi, O. Onysko, A. Kuk, B. Solohub and V. Kopei. “Development of the Technique for Designing Rational Routes of the Functional Surfaces Processing of Products,” in New Technologies, Development and Application V. NT 2022. Lecture Notes in Networks and Systems, vol 472. I. Karabegović, A. Kovačević, S. Mandžuka, Ed. Cham: Springer, 2022, pp. 135-143. https://doi.org/10.1007/978-3-031-05230-9_16
- A. Permyakov, S. Dobrotvorskiy, L. Dobrovolska, Y. Basova and M. Ivanova. “Computer Modeling Application for Predicting of the Passing of the High-Speed Milling Machining Hardened Steel,” in Advances in Design, Simulation and Manufacturing. DSMIE 2019. Lecture Notes in Mechanical Engineering, V. Ivanov, et al. Ed. Cham: Springer, 2019, pp. 135-145. https://doi.org/10.1007/978-3-319-93587-4_15
- Y. Danylchenko, M. Storchak, M. Danylchenko and A. Petryshyn. “Cutting Process Consideration in Dynamic Models of Machine Tool Spindle Units.” Machines, vol. 11, art. no. 582, 2023. https://doi.org/10.3390/machines11060582
- I. Yakovenko, A. Permyakov, M. Ivanova, Y. Basova and D. Shepeliev. “Lifecycle Management of Modular Machine Tools,” in Advanced Manufacturing Processes III. InterPartner 2021. Lecture Notes in Mechanical Engineering, V. Tonkonogyi, V. Ivanov, J. Trojanowska, G. Oborskyi, I. Pavlenko, Ed. Cham: Springer, 2022, pp. 127-137. https://doi.org/10.1007/978-3-030-91327-4_13
- T. Pryhorovska and L. Ropyak. “Machining Error Influnce on Stress State of Conical Thread Joint Details,” in Proceedings of the International Conference on Advanced Optoelectronics and Lasers, CAOL, 2019-September, art. no. 9019544, pp. 493-497, 2019. https://doi.org/10.1109/CAOL46282.2019.9019544
- V.B. Kopei, O.R. Onysko and V.G. Panchuk. “Computerized system based on FreeCAD for geometric simulation of the oil and gas equipment thread turning.” In International Conference on Applied Sciences (ICAS), vol. 477, art. no. 012032, 2019. https://doi.org/10.1088/1757-899X/477/1/012032
- K.S. Barandych, S.P. Vysloukh and V.S. Antonyuk. “Ensuring Fatigue Life of Parts During Finish Turning with Cubic Boron Nitride Tools.” Journal of Superhard Materials, vol. 40, pp. 206-215, 2018. https://doi.org/10.3103/S1063457618030085
- V. Lozynskyi, T. Shihab, I. Drach and L. Ropyak. “The Inertial Disturbances of Fluid Movement in the Chamber of a Liquid Autobalancer.” Machines, vol. 12, art. no. 39, 2024. https://doi.org/10.3390/machines12010039
- I. Drach, V. Royzman, A. Bubulis and K. Juzėnas. “Passive balancing of the rotor with an auto-balancing device with a viscous incompressible liquid.” Mechanika, vol. 27, pp. 45-51, 2021. https://doi.org/10.5755/J02.MECH.23789
- M. Gnuffi, D. Pighin and N. Sakamoto. “Rotor imbalance suppression by optimal control.” Optim Control Appl Meth., vol. 43, pp. 213-242, 2022. https://doi.org/10.1002/oca.2780
- A.I. Bandura. “Some improvements of criteria of L-index boundedness in direction.” Matematychni Studii, vol. 47, pp. 27-32, 2017. https://doi.org/10.15330/ms.47.1.27-32
- A.I. Bandura. “Composition of entire functions and bounded L-index in direction.” Matematychni Studii, vol. 47, pp. 179-184, 2017. https://doi.org/10.15330/ms.47.2.179-184
- I. Chudyk, P. Raiter, Ya. Grydzhuk and L. Yurych. “Mathematical model of oscillations of a drill tool with a drill bit of cutting-scraping type.” Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 2020, pp. 52-57, 2020. https://doi.org/10.33271/nvngu/2020-1/052
- Y. Gong, L. Ren, X. Han, A. Gao, S. Jing, C. Feng and Y. Song. “Analysis of operating conditions for vibration of a self-propelled monorail branch chipper.” Agriculture, vol. 13, art. no. 101, 2023. https://doi.org/10.3390/agriculture13010101
- A.I. Bandura. and Y.I. Savchuk. “Structure of the set of borel exceptional vectors for entire curves.” Matematychni Studii, vol. 53, pp. 41-47, 2020. https://doi.org/10.30970/ms.53.1.41-47
- Y.I. Savchuk and A.I. Bandura. “Asymptotic vectors of entire curves.” Matematychni Studii, vol. 56, pp. 48–54, 2021. https://doi.org/10.30970/ms.56.1.48-54
- V.F. Navarro Torres, J.R. Figueiredo, R.C. De La Hoz, M. Botaro and L.S. Chaves. ”A Mine-to-Crusher Model to Minimize Costs at a Truckless Open-Pit Iron Mine in Brazil.” Minerals, vol. 12, art. no. 1037, 2022. https://doi.org/10.3390/min12081037
- M. Dutkiewicz, A. Velychkovych, I. Shatskyi and V. Shopa. “Efficient Model of the Interaction of Elastomeric Filler with an Open Shell and a Chrome-Plated Shaft in a Dry Friction Damper.” Materials, vol. 15, art. no. 4671, 2022. https://doi.org/10.3390/ma15134671
- A. Velychkovych, I. Petryk and L. Ropyak. “Analytical study of operational properties of a plate shock absorber of a sucker-rod string.” Shock and Vibration, vol. 2020, art. no. 3292713, 2020. https://doi.org/10.1155/2020/3292713
- K. Midor. “Innovation in coal mining management as an intelligent specialization.” Production Engineering Archives, vol. 15, pp. 41-44, 2017. https://doi.org/10.30657/pea.2017.15.10
- M. Zasadzień and J. Zarnovský. “Improvement of Selected Logistics Processes Using Quality Engineering Tools.” Management Systems in Production Engineering, vol. 26, pp. 55-59, 2018. https://doi.org/10.2478/mspe-2018-0009
- S.K. Gupta and J. Rosak-Szyrocka. “Quality and Value Management in Education in the Digitalization Era,” in Quality Management, Value Creation, and the Digital Economy, 1nd ed., J. Rosak-Szyrocka, J. Żywiołek M. Shahbaz, Ed. London: Routledge, 2023, pp. 167-180. https://doi.org/10.4324/9781003404682-11
- W. Biały, and J. Fries. “Computer systems supporting the management of machines/equipment in hard coal mines. case study.” Management Systems in Production Engineering, vol. 27, pp. 138-143, 2019. https://doi.org/10.1515/mspe-2019-0022
- M. Bembenek, J. Krawczyk and K. Pańcikiewicz. “The wear mechanism of mill beaters for coal grinding made-up from high manganese cast steel.” Engineering Failure Analysis, vol. 142, art. no. 106843, 2022. https://doi.org/10.1016/j.engfailanal.2022.106843
- K.A. Abuhasel. “Machine learning approach to handle data-driven model for simulation and forecasting of the cone crusher output in the stone crushing plant.” Computational Intelligence, vol. 37, pp. 1098-1110, 2021. https://doi.org/10.1111/coin.12338
- B. Gajdzik. “Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance.” Metalurgija, vol. 53, pp. 269-272, 2014.
- L.B. Varela, G. Tressia, M. Masoumi, E.M. Bortoleto, C. Regattieri and A. Sinatora. “Roller crushers in iron mining, how does the degradation of Hadfield steel components occur?.” Engineering Failure Analysis, vol. 122, art. no. 105295, 2021. https://doi.org/10.1016/j.engfailanal.2021.105295
- L. Ropyak, T. Shihab, A. Velychkovych, V. Bilinskyi, V. Malinin and M. Romaniv. “Optimization of Plasma Electrolytic Oxidation Technological Parameters of Deformed Aluminum Alloy D16T in Flowing Electrolyte.” Ceramics, vol. 6, pp. 146-167, 2023. https://doi.org/10.3390/ceramics6010010
- M. Bembenek, P. Prysyazhnyuk, T. Shihab, R. Machnik, O. Ivanov and L. Ropyak. “Microstructure and Wear Characterization of the Fe-Mo-B-C – Based Hardfacing Alloys Deposited by Flux-Cored Arc Welding.” Materials, vol. 15, art. no. 5074, 2022. https://doi.org/10.3390/ma15145074
- B. Gajdzik. “Post-Pandemic Steel Production Scenarios for Poland Based on Forecasts of Annual Steel Production Volume.” Management Systems in Production Engineering, vol. 31, pp. 172-190, 2023. https://doi.org/10.2478/mspe-2023-0019
- L. Ropyak, I. Schuliar and O. Bohachenko. “Influence of technological parameters of centrifugal reinforcement upon quality indicators of parts.” Eastern-European Journal of Enterprise Technologies, vol. 1, pp. 53-62, 2016. https://doi.org/10.15587/1729-4061.2016.59850
- USGS. Available at: http://www.bjohnsonsworld.co.uk/theriseoftheubermensch (Accessed: 10 May 2024).
- T. Shihab, P. Prysyazhnyuk, I. Semyanyk, R. Anrusyshyn, O. Ivanov and L. Troshchuk. “Thermodynamic Approach to the Development and Selection of Hardfacing Materials in Energy Industry.” Management Systems in Production Engineering, vol. 28, pp. 84-89, 2020. https://doi.org/10.2478/mspe-2020-0013
- P. Prysyazhnyuk and D. Di Tommaso. “The thermodynamic and mechanical properties of Earth-abundant metal ternary boride Mo2(Fe,Mn)B2 solid solutions for impact and wear-resistant alloys.” Materials Advances, vol. 4, pp. 3822-3838, 2023. https://doi.org/10.1039/d3ma00313b
- K.H. Levchuk, T.M. Radchenko and V.A. Tatarenko. “High-temperature entropy effects in the tetragonality of the ordering interstitial-substitutional solution based on the body-centred tetragonal metal.” Metallofizika i Noveishie Tekhnologii, vol. 43, pp. 1-26, 2021. https://doi.org/10.15407/mfint.43.01.0001
- V. Lozynskyi, B. Trembach, M.M. Hossain, M.H. Kabir, Y. Silchenko, M. Krbata, K. Sadovyi, O. Kolomiitse and L. Ropyak. “Prediction of phase composition and mechanical properties Fe-Cr-C-B-Ti-Cu hardfacing alloys: Modeling and experimental Validations.” Heliyon, vol. 10, art. no. e25199, 2024. https://doi.org/10.1016/j.heliyon.2024.e25199
- B.O. Trembach, D.V. Hlushkova, V.M. Hvozdetskyi, V.A. Vynar, V.I. Zakiev, O.V. Kabatskyi, D.V. Savenok and O.Y Zakavorotnyi. “Prediction of Fill Factor and Charge Density of Self-Shielding Flux-Cored Wire with Variable Composition.” Materials Science, vol. 59, pp. 18-25, 2023. https://doi.org/10.1007/s11003-023-00738-7
- V. Lozynskyi, B. Trembach, E. Katinas, K. Sadovyi, M. Krbata, O. Balenko, I. Krasnoshapka, O. Rebrova, S. Knyazev, O. Kabatskyi, H. Kniazieva and L. Ropyak. “Effect of Exothermic Additions in Core Filler on Arc Stability and Microstructure during Self-Shielded, Flux-Cored Arc Welding.” Crystals, vol. 14, art. no. 335, 2024. https://doi.org/10.3390/cryst14040335
- Ł. Szymański, E. Olejnik, J.J. Sobczak, M. Szala, P. Kurtyka, T. Tokarski, A. Janas. “Dry sliding, slurry abrasion and cavitation erosion of composite layers reinforced by TiC fabricated in situ in cast steel and gray cast iron.” Journal of Materials Processing Technology, vol. 308, art. no. 117688, 2022. https://doi.org/10.1016/j.jmatprotec.2022.117688
- M. Szala, M. Walczak, T. Hejwowski. “Factors Influencing Cavitation Erosion of NiCrSiB Hardfacings Deposited by Oxy-Acetylene Powder Welding on Grey Cast Iron.” Advances in Science and Technology Research Journal, vol. 15, pp. 376-386, 2021. https://doi.org/10.12913/22998624/143304
- E.F. Pereplotchikov, K.B. Vasyliv, V.A. Vynar, I.O. Ryabtsev and V.I. Zakiev. “Elevation of the Wear Resistance of Low-Alloy Structural Steel by Plasma-Powder Surfacing with Alloys Based on Iron, Chromium, and Nickel.” Materials Science, vol. 54, pp. 378-386, 2018. https://doi.org/10.1007/s11003-018-0195-y
- P. Prysyazhnyuk, O. Ivanov, O. Matvienkiv, S. Marynenko, O. Korol and I. Koval. “Impact and abrasion wear resistance of the hardfacings based on high-manganese steel reinforced with multicomponent carbides of Ti-Nb-Mo-V-C system.” Procedia Structural Integrity, vol. 36, pp. 130-136, 2022. https://doi.org/10.1016/j.prostr.2022.01.014
- S. Ge, Q. Wang and J. Wang. “The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines.” Wear, vol. 376-377, Part B, pp. 1097-1104, 2017. https://doi.org/10.1016/j.wear.2017.01.015
- P. Prysyazhnyuk, M. Molenda, T. Romanyshyn, L. Ropyak, L. Romanyshyn and V. Vytvytskyi. “Development of a hardbanding material for drill pipes based on high-manganese steel reinforced with complex carbides.” Acta Montanistica Slovaca, vol. 27, pp. 685-696, 2022. https://doi.org/10.46544/AMS.v27i3.09
- A.S. Yamashita, A. Thivierge, and T. Euzebio. “A review of modeling and control strategies for cone crushers in the mineral processing and quarrying industries.” Minerals Engineering, vol. 170, art. no. 107036, 2021. https://doi.org/10.1016/j.mineng.2021.107036
- PULVOMATIC ebroacero. Available at: https://www.pulvomatic.com/en/home (Accessed: 10 May 2024).