References
- A. Raja Santhi, P. Muthuswamy. “Industry 5.0 or industry 4.0S? Introduction to industry 4.0 and a peek into the prospective industry 5.0 technologies.” Int J Interact Des Manuf, vol. 17, pp. 947-979, 2023.
- M.V. Pereira Pessôa, J.M. Jauregui Becker. “Smart design engineering: a literature review of the impact of the 4th industrial revolution on product design and development.” Res Eng Design., vol. 31, pp. 175-195, 2020.
- A.P. Menon, V. Lahoti, N. Gunreddy, et al. “Quality control tools and digitalization of real-time data in sustainable manufacturing.” Int J Interact Des Manuf, 2022.
- Z. Huang, C. Jowers, D. Kent, et al. “The implementation of Industry 4.0 in manufacturing: from lean manufacturing to product design.” Int J Adv Manuf Technol, vol. 121, pp. 3351-3367, 2022.
- T. Ding, G. Yan, Z. Zhou, et al. “A novel manufacturing service model transformation method based on product lifecycle.” Peer-to-Peer Netw. Appl., vol. 15, pp. 1638-1652, 2022.
- X. Niu, M. Wang, S. Qin. “Product design lifecycle information model (PDLIM).” Int J Adv Manuf Technol., vol. 118, pp. 2311-2337, 2022.
- B. Anthony. “Deployment of distributed ledger and decentralized technology for transition to smart industries.” Environ Syst Decis., vol. 43, pp. 298-319, 2023.
- S. Kumar, W.M. Lim, U. Sivarajah, et al. “Artificial Intelligence and Blockchain Integration in Business: Trends from a Bibliometric-Content Analysis.” Inf Syst Front., vol. 25, pp. 871-896, 2023.
- C. Zhou, L. Qi, X. Liu, et al. “MRO Configuration Management for Complex Products.” J. Syst. Sci. Syst. Eng., vol. 31, pp. 359-380, 2022.
- L. Wang, Z. Liu, A. Liu, et al. “Artificial intelligence in product lifecycle management.” Int J Adv Manuf Technol, vol. 114, pp. 771-796, 2021.
- P. Kurdel, J. Labun, F. Adamcik. “The Estimation Method of the Characteristics of an Aircraft with Electromechanic Analogue.” Nase More, vol. 61, No. 1-2, pp. 18-21, 2014.
- N. Cubonova, T. Dodok, Z. Sagova. “Optimisation of the Machining Process Using Genetic Algorithm.” Scientific J. of Silesian Uni. of Technology – series Transport, vol. 104, pp. 15-25, 2019.
- S. Ren, Y. Zhang, T. Sakao, et al. “An Advanced Operation Mode with Product-Service System Using Lifecycle Big Data and Deep Learning.” Int. J. of Precis. Eng. and Manuf.-Green Tech., vol. 9, pp. 287-303, 2022.
- K. Dyadyura, K.L. Hrebenyk, T. Krenicky, T. Zaborowski. “Modeling of the manufacturing systems state in the conditions of the lean production.” MM Science Journal, pp. 4408-4413, 2021.
- S.Y. Lin, L. Zhang, J. Li, et al. “A survey of application research based on blockchain smart contract.” Wireless Netw., vol. 28, pp. 635-690, 2022.
- X. Fan, Q. Chai, Z. Zhong. “Multav: A multi-chain token backed voting framework for decentralized blockchain governance.” International Conference on Blockchain, 2020, pp. 33-47.
- S.B. Rane, Y.A.M. Narvel. “Data-driven decision making with Blockchain-IoT integrated architecture: a project resource management agility perspective of Industry 4.0.” Int J Syst Assur Eng Manag, vol. 13, pp. 1005-1023, 2022.
- P. Jagwani, V.B. Singh, N. Agrawal, et al. “Blockchain technology and software engineering practices: a systematic review of literature using topic modelling approach.” Int J Syst Assur Eng Manag, vol. 14 (suppl. 1), pp. 1-17, 2023.
- M. Blatnický, J. Dižo, M. Sága, J. Gerlici, E. Kuba. “Design of a Mechanical Part of an Automated Platform for Oblique Manipulation.” Applied Sciences, vol. 10, no. 23, 8467, 2020.
- T. Dodok, N. Čuboňová, I. Kuric. “Workshop Programming as Part of Technological Preparation of Production.” Advances in Science and Technology Research Journal, vol. 11. pp. 111-116, 2017.
- M. Saga, R. Bednar, M. Vasko. “Contribution to Modal and Spectral Interval Finite Element Analysis.” Vibration Problems ICOVP 2011, vol. 139, pp. 269-274, 2011.
- J. Jurko, A. Panda, M. Gajdoš, T. Zaborowski. “Verification of cutting zone machinability during the turning of a new austenitic stainless steel”. Advances in Computer Science and Education Applications, vol. 2011, pp. 338-345, 2011.
- J. Jurko, M. Džupon, A. Panda and J. Zajac. “Study influence of plastic deformation a new extra low carbon stainless steels XCr17Ni7MoTiN under the surface finish when drilling”. Advanced Materials Research, vol. 538-541, pp. 1312-1315, 2012.
- J. Jurko, A. Panda and M. Behún. “Prediction of a new form of the cutting tool according to achieve the desired surface quality”. Applied Mechanics and Materials, vol. 268, no. 1, pp. 473-476, 2013.
- A. Panda, J. Duplák, J. Jurko and M. Behún. “Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6”. Advanced Materials Research, vol. 340, pp. 30-33, 2011.
- A. Panda, J. Duplák, J. Jurko and M. Behún. “New experimental expression of durability dependence for ceramic cutting tool”. Applied Mechanics and Materials, vol. 275-277, p. 2230-2236, 2013.
- A. Panda, J. Duplák, J. Jurko and I. Pandová. “Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016”. Applied Mechanics and Materials, vol. 415, pp. 610-613, 2013.
- A. Panda, J. Duplák and J. Jurko. “Analytical expression of T-vc dependence in standard ISO 3685 for cutting ceramic”. Key Engineering Materials, vol. 480-481, pp. 317-322, 2011.
- V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova, T. Zaborowski. “Enhancing efficiency by implementation of integrated management system in order to align organisational culture and daily practice.” Management Systems in Production Engineering, vol. 28, no. 4, pp. 304-311, 2020.
- J. Valíček, M. Harničárová, A. Panda, et al. “Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface”. Machining, joining and modif. of adv. materials, vol. 61, pp. 111-120, 2016.
- A. Sedlackova, P. Kurdel, J. Labun. “Simulation of Unmanned Aircraft Vehicle Flight Precision.” LOGI 2019 – Horizons of Autonomous Mobility in Europe, vol. 44, pp. 313-320, 2020.
- T. Zaborowski. Ekowytwarzanie. Gorzow, 2007, 100 p.
- V. Mullet, P. Sondi, E. Ramat. “A blockchain-based confidentiality-preserving approach to traceability in Industry 4.0.” Int J Adv Manuf Technol., vol. 124, pp. 1297-1320, 2023.
- Q. Zhang, B. Liao, S. Yang. “Application of blockchain in the field of intelligent manufacturing: Theoretical basis, realistic plights, and development suggestions.” Front. Eng. Manag., vol. 7, pp. 578-591, 2020.
- L. Wang, Z. Liu, A. Liu, A., et al. “Artificial intelligence in product lifecycle management.” Int J Adv Manuf Technol., vol. 114, pp. 771-796, 2021.
- S. Chen, X. Cai, X. Wang, et al. “Blockchain applications in PLM towards smart manufacturing.” Int J Adv Manuf Technol., vol. 118, pp. 2669-2683, 2022.
- W. Liu, X. Liu, X. Shi, et al. “Collaborative adoption of block-chain technology: A supply chain contract perspective.” Front. Eng. Manag., vol. 10, pp. 121-142, 2023.
- R. Sonmez, F.Ö. Sönmez, S. Ahmadisheykhsarmast. “Block-chain in project management: a systematic review of use cases and a design decision framework.” J Ambient Intell Human Comput, 2021.
- H. Liu, Y. Chen. “Using blockchain technology in IoT manufacture environment for intelligence prediction.” Soft Comput, vol. 27, pp. 1715-1729, 2023.
- J. Gamec, M. Repko, M. Gamcova, I. Gladisova, P. Kurdel, A. Nekrasov, C. Fidge. “Low Profile Sinuous Slot Antenna for UWB Sensor Networks.” Electronics, vol. 8, issue 2, 2019.
- P. Kurdel, M. Češkovič, N. Gecejová, F. Adamčík and M. Gamcová. „Local control of unmanned air vehicles in the mountain area“ Drones, vol. 54, pp. 1-18, 2022.
- L. Karrach, E. Pivarčiová, P. Bozek. “Recognition of Perspective Distorted QR Codes with a Partially Damaged Finder Pattern in Real Scene Images.” Applied Sciences, vol. 10, no. 21, 7814, 2020.
- J. Labun, S. Fabry, M. Ceskovic, P. Kurdel. “Mechanical demodulation of aircraft antenna signal.” 6th International Conference on Air Transport (INAIR), vol. 28, pp. 149-155, 2017.
- Q. Arshad, W.Z. Khan, F. Azam, et al. “Blockchain-based decentralized trust management in IoT: systems, requirements and challenges.” Complex Intell. Syst., 2023.
- P. Sharma, R. Jindal, M.D. Borah. “A Review of Blockchain-Based Applications and Challenges.” Wireless Pers Commun., vol. 123, pp. 1201-1243, 2022.
- D. Dmitrishin, G. Lesaja, I. Skrinnik, A. Stokolos. “A new method for finding cycles by semilinear control.” Physics Letters, Section A: General, Atomic and Solid State Physics, vol. 383, no. 16, pp. 1871-1878, 2019.