Have a personal or library account? Click to login
Comparative Analysis of Combustion of Qualified Composite Fuel for the Transitional Period in the Household and Communal Sector in Poland Cover

Comparative Analysis of Combustion of Qualified Composite Fuel for the Transitional Period in the Household and Communal Sector in Poland

Management Systems in Production Engineering
Volume 30 (2022): Issue 4 (December 2022)
By: Michał Bembenek,  Tomasz Dzik,  Jarosław Smyła,  Artur Kozłowski and  Piotr Wojtas  
Open Access
|Oct 2022

References

  1. [1] D. Łowicki, “Landscape pattern as an indicator of urban air pollution of particulate matter in Poland”, Ecological indicators, vol. 97, pp. 17-24, 2019, DOI: 10.1016/j.ecolind.2018.09.050.
    Open DOISearch in Google ScholarBack to article
  2. [2] K. Stala-Szlugaj, “Spalanie węgla kamiennego w sektorze komunalno-bytowym-wpływ na wielkość” niskiej emisji””, Rocznik Ochrona Środowiska, vol. 13, pp. 1877-1889, 2011.
    Search in Google ScholarBack to article
  3. [3] G. Wielgosiński and J. Czerwińska, “Smog episodes in Poland”, Atmosphere, vol. 11, no. 3, p. 277, 2020, https://doi.org/10.3390/atmos11030277.
    Search in Google ScholarBack to article
  4. [4] W. Rogula-Kozłowska, K. Klejnowski, P. Rogula-Kopiec, B. Mathews, and S. Szopa, “A study on the seasonal mass closure of ambient fine and coarse dusts in Zabrze, Poland”, Bulletin of Environmental Contamination and Toxicology”, vol. 88, no. 5, pp. 722-729, 2012, DOI: 10.1007/s00128-012-0533-y.22349306
    Open DOISearch in Google ScholarBack to article
  5. [5] https://stat.gov.pl/obszary-tematyczne/srodowisko-energia/energia/zuzycie-energii-w-gospodarstwach-domowych-w-2018-roku,12,1.html#, access 30th April 2022.
    Search in Google ScholarBack to article
  6. [6] A. Kerimray, L. Rojas-Solórzano, M. A. Torkmahalleh, P. K. Hopke, and B. P. Ó. Gallachóir, “Coal use for residential heating: patterns, health implications and lessons learned”, Energy for Sustainable Development, vol. 40, pp. 19-30, 2017, https://doi.org/10.1016/j.esd.2017.05.005.
    Search in Google ScholarBack to article
  7. [7] K. Křŭmal, P. Mikuška, J. Horák, F. Hopan, and K. Krpec, “Comparison of emissions of gaseous and particulate pollutants from the combustion of biomass and coal in modern and old-type boilers used for residential heating in the Czech Republic, Central Europe”, Chemosphere, vol. 229, pp. 51-59, 2019, DOI: 10.1016/j.chemosphere.2019.04.137.31075702
    Open DOISearch in Google ScholarBack to article
  8. [8] M. Czaplicka, J. Klyta, B. Komosiński, T. Konieczny, and K. Janoszka, “Comparison of Carbonaceous Compounds Emission from the Co-Combustion of Coal and Waste in Boilers Used in Residential Heating in Poland, Central Europe”, Energies, vol. 14, no. 17, p. 5326, 2021, https://doi.org/10.3390/en14175326.
    Search in Google ScholarBack to article
  9. [9] B. Karbowska, J. Idkowiak, and B. Wyrwas, “Badanie wpływu wilgoci higroskopijnej i przemijającej na wartość opałową węgla pochodzącego z kopalń należących do Górnośląskiego Zagłębia Węglowego”, Przemysł Chemiczny, vol. 97, no. 2, pp. 59-62, 2018, DOI: 10.15199/62.2018.2.4.
    Open DOISearch in Google ScholarBack to article
  10. [10] Standard PN-EN 303-5:2021. Heating boilers.
    Search in Google ScholarBack to article
  11. [11] Commission Regulation (EU) 2015/1185 of 24 April 2015 Implementing Directive 2009/125/EC of the European Parliament and of the Council with Regard to Ecodesign Requirements for Solid Fuel Local Space Heaters (Official Journal of the European Union); Publications Office of the European Union: Luxembourg, 2015.
    Search in Google ScholarBack to article
  12. [12] P. Papadatos, C.S. Psomopoulos, and G.C. Ioannidis, “Industrial furnaces/burners. A review on the environmental legislation focusing on ecodesign”, Fresenius Environmental Bulletin, vol. 26, no. 9, pp. 5666-5673, 2017.
    Search in Google ScholarBack to article
  13. [13] A. Manowska, K. T. Osadnik, and M. Wyganowska, “Economic and social aspects of restructuring Polish coal mining: Focusing on Poland and the EU”, Resources Policy, vol. 52, pp. 192-200, 2017, DOI: 10.1016/j.resourpol.2017.02.006.
    Open DOISearch in Google ScholarBack to article
  14. [14] T. Dziok and K. Penkała, “The possibility of reducing emissions from households by using coal briquettes”, Polityka Energetyczna-Energy Policy Journal, vol 23, no. 3, pp. 55–70, 2020, DOI: https://doi.org/10.33223/epj/126438.
    Search in Google ScholarBack to article
  15. [15] S. Stelmach, A. Sobolewski and K. Ignasiak, “Ecological coal based fuels” Systemy Wspomagania w Inżynierii Produkcji, vol. 9, no. 2, pp. 37-47. 2020,
    Search in Google ScholarBack to article
  16. [16] N. Maciejończyk, G. Pełka, W. Luboń, and D. Malik, “Analysis of the flue gas produced during the coal and biomass co-combustion in a solid fuel boiler”, in Renewable Energy Sources: Engineering, Technology, Innovation, Springer, 2020, pp. 239-246, DOI:10.1007/978-3-030-13888-2_23.
    Open DOISearch in Google ScholarBack to article
  17. [17] R. Junga, M. Wzorek, and M. Kaszubska, “Technical and environmental performance of 10 kW understocker boiler during combustion of biomass and conventional fuels”, in E3S Web of Conferences, 2017, vol. 19, p. 01009, https://doi.org/10.1051/e3sconf/20171901009.
    Search in Google ScholarBack to article
  18. [18] P. Kaszyński and J. Kamiński, “Coal demand and environmental regulations: A case study of the Polish power sector”, Energies, vol. 13, no. 6, p. 1521, 2020, https://doi.org/10.3390/en13061521.
    Search in Google ScholarBack to article
  19. [19] T. Dzik, M. Hryniewicz, and P. Wdaniec, “Pressure agglomeration of solid composite fuel”, Przemysl Chemiczny, vol. 96, no. 9, pp. 1856-1859, 2017, DOI: 10.15199/62.2017.9.6.
    Open DOISearch in Google ScholarBack to article
  20. [20] R. Chavda and P. Mahanwar, “Effect of inorganic and organic additives on coal combustion: a review”, International Journal of Coal Preparation and Utilization, vol. 41, no. 10, pp. 749-766, 2021, https://doi.org/10.1080/19392699.2018.1536046.
    Search in Google ScholarBack to article
  21. [21] M. Bembenek, „Research and prospects for new areas of using roller presses”, Przemysł Chemiczny, vol. 96, no. 9, pp. 1845-1847, 2017, DOI: 10.15199/62.2017.9.3.
    Open DOISearch in Google ScholarBack to article
  22. [22] M. Bembenek, T. Dzik, J. Smyła, and P. Wojtas, “Research on the possibility of producing an environmentally friendly qualified composite fuel for the transitional period in the household and communal sector in Poland”, Przemysł Chemiczny, vol. 101, no. 3, pp. 191-196, 2022, DOI: 10.15199/62.2022.3.3.
    Open DOISearch in Google ScholarBack to article
  23. [23] Z. Drzymała, “Industrial Briquetting – Fundamentals and Methods”, Elsevier Science Publishers, 1993.
    Search in Google ScholarBack to article
  24. [24] M. Hryniewicz, M. Bembenek, A. Janewicz, and B. Kosturkiewicz, “Agglomeration of fine-grained materials in roll presses with asymmetrical compaction unit”, Przemysł Chemiczny, vol. 94, no. 12, pp. 2223-2226, 2015, DOI: 10.15199/62.2015.12.27.
    Open DOISearch in Google ScholarBack to article
  25. [25] K. Baiul, S. Vashchenko, A. Khudyakov, P. Krot, and N. Solodka, “Optimization of wastes compaction parameters in case of gradual wear of the briquetting press rolls”, Structural Integrity, Cham: Springer International Publishing, 2022, pp. 293-302 https://doi.org/10.1007/978-3-030-91847-7_27
    Search in Google ScholarBack to article
  26. [26] M. Hryniewicz, “Metoda doboru pras walcowych oraz opracowania założeń do ich modernizacji lub konstrukcji”, Kraków, Wydawnictwa AGH, 1997.
    Search in Google ScholarBack to article
  27. [27] B. Kosturkiewicz, A. Janewicz, A. Magdziarz, M. Hryniewicz, M. Bembenek, and P. Gara, “Zagadnienie brykietowania węgla kamiennego koksowego”, Rynek Energii, no. 2, pp. 104-109, 2014.
    Search in Google ScholarBack to article
  28. [28] A. Balraj, J. Krishnan, K. Selvarajan, and K. Sukumar, “Potential use of biomass and coal-fine waste for making briquette for sustainable energy and environment”, Environmental Science and Pollution Research, vol. 28, no. 45, pp. 63516-63522, 2021. https://doi.org/10.1007/s11356-020-10312-232748356
    Search in Google ScholarBack to article
  29. [29] A.A. Adeleke, J.K. Odusote, O.A. Lasode, P.P. Ikubanni, M. Malathi, and D. Paswan, “Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders”, Heliyon, vol. 5, no. 7, p. e02160, 2019. https://doi.org/10.1016/j.heliyon.2019.e02160666403931384690
    Search in Google ScholarBack to article
  30. [30] S. Obidzinski, “The evaluation of the power consumption of the pellets production process from the plant materials”, Teka Komisji Motoryzacji i Energetyki Rolnictwa, vol. 13, no. 2, pp. 73-78, 2013.
    Search in Google ScholarBack to article
  31. [31] A.T. Mursito, D.N. Arifin, and Others, “Characterization of bio-coal briquettes blended from low quality coal and biomass waste treated by Garant® bio-activator and its application for fuel combustion”, International Journal of Coal Science & Technology, vol. 7, no. 4, pp. 796-806, 2020, https://doi.org/10.1007/s40789-020-00309-0.
    Search in Google ScholarBack to article
  32. [32] A. Özyuğuran, H.H. Acma, and E. Dahiloğlu, “Production of fuel briquettes from rice husk-lignite blends”, Environmental Progress & Sustainable Energy, vol. 36, no. 3, pp. 742–748, 2017, https://doi.org/10.1002/ep.12429.
    Search in Google ScholarBack to article
  33. [33] A.A. Adeleke, J.K. Odusote, P.P. Ikubanni, O.O. Agboola, A.O. Balogun, O.A. Lasode, “Tumbling strength and reactivity characteristics of hybrid fuel briquette of coal and biomass wastes blends”, Alexandria Engineering Journal, vol. 60, no. 5, pp. 4619-4625, 2021.https://doi.org/10.1016/j.aej.2021.03.069
    Search in Google ScholarBack to article
  34. [34] A. Balraj, J. Krishnan, K. Selvarajan, and K. Sukumar, “Potential use of biomass and coal-fine waste for making briquette for sustainable energy and environment”, Environmental Science and Pollution Research, vol. 28, no. 45, pp. 63516-63522, 2021, https://doi.org/10.1007/s11356-020-10312-2.32748356
    Search in Google ScholarBack to article
  35. [35] S.Y. Kpalo, M.F. Zainuddin, L.A. Manaf, and A.M. Roslan, “A review of technical and economic aspects of biomass briquetting”, Sustainability, vol. 12, no. 11, p. 4609, 2020.https://doi.org/10.3390/su12114609
    Search in Google ScholarBack to article
  36. [36] O.F. Obi, R. Pecenka, and M.J. Clifford, “A Review of Biomass Briquette Binders and Quality Parameters”, Energies, vol. 15, no. 7, p. 2426, 2022. https://doi.org/10.3390/en15072426
    Search in Google ScholarBack to article
  37. [37] A. Janewicz, B. Kosturkiewicz, “Otrzymywanie brykietów paliwa kompozytowego z węgla brunatnego i biomasy”, Przemysł Chemiczny, vol. 94, no. 9, pp. 1521-1523, 2015.
    Search in Google ScholarBack to article
  38. [38] G. Borowski, W. Stępniewski, and K. Wójcik-Oliveira, “Effect of starch binder on charcoal briquette properties”, International Agrophysics, vol. 31, no. 4, p. 571, 2017.10.1515/intag-2016-0077
    Search in Google ScholarBack to article
  39. [39] B. Kosturkiewicz, A. Janewicz, M. Hryniewicz, and A. Rozwadowski, “Zagadnienie zagospodarowania pylistego węgla drzewnego”, Rynek Energii, no. 6, pp. 99-105, 2015.
    Search in Google ScholarBack to article
  40. [40] G. Borowski and J.J. Hycnar, “Utilization of fine coal waste as a fuel briquettes”, International Journal of Coal Preparation and Utilization, vol. 33, no. 4, pp. 194-204, 2013.10.1080/19392699.2013.787993
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2022-0046 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 362 - 369
Published on: Oct 29, 2022
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
microbriquette,
environmentally friendly fuel,
solid fuel,
composite solid fuel,
qualified solid fuel,
roller press
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2022 Michał Bembenek, Tomasz Dzik, Jarosław Smyła, Artur Kozłowski, Piotr Wojtas, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 30 (2022): Issue 4 (December 2022)Next article