Have a personal or library account? Click to login
Rotors of Vertical-Axial Wind Turbines Assembled in Bearings and Aerodynamic Characteristics of a Blade with Unclosed Wing Profile Cover

Rotors of Vertical-Axial Wind Turbines Assembled in Bearings and Aerodynamic Characteristics of a Blade with Unclosed Wing Profile

Management Systems in Production Engineering
Volume 30 (2022): Issue 4 (December 2022)
By: Anton Panda,  Lyudmila Rozhkova,  Eduard Kuznetsov and  Volodymyr Nahornyi  
Open Access
|Oct 2022

References

  1. [1] J.W. Twidell and A.D. Weir. Renewable Energy Resources. London, E. & F.N. Spon, 1986.
    Search in Google ScholarBack to article
  2. [2] Global Wind Energy Council. https://gwec.net. [March 29, 2022].
    Search in Google ScholarBack to article
  3. [3] WindEurope. The voice of the wind industry. https://windeurope.org. [March 29, 2022].
    Search in Google ScholarBack to article
  4. [4] World Wind Energy Association. https://wwindea.org. [March 29, 2022].
    Search in Google ScholarBack to article
  5. [5] BloombergNEF. URL: https://about.bnef.com.
    Search in Google ScholarBack to article
  6. [6] Z. Murcinkova, P. Baron, L. Tino, M. Pollak and J. Murcinko. “Research and analysis of stress distribution in multilayers of coated tools.” International Journal of Materials Research, vol. 108, no. 6, pp. 495-506, 2017.10.3139/146.111504
    Search in Google ScholarBack to article
  7. [7] P. Baron, J. Dobransky, M. Kocisko, M. Pollak and T. Cmorej. “The parameter correlation of acoustic emission and high-frequency vibrations in the assessment process of the operating state of the technical system.” Acta Mechanica et Automatica, vol. 10, no. 2, pp. 112-116, 2016.10.1515/ama-2016-0018
    Search in Google ScholarBack to article
  8. [8] I. Mrkvica, M. Janos and P. Sysel. “Cutting efficiency by drilling with tools from different materials.” Advanced Materials Research, Vols. 538-541, pp. 1327-1331, 2012.
    Search in Google ScholarBack to article
  9. [9] T. Zaborowski. Ekowytwarzanie. Gorzow, 2007, 100 p.
    Search in Google ScholarBack to article
  10. [10] A.S. Chaus, P. Pokorny, E. Caplovic, M.V. Sitkevich and J. Peterka. “Complex fine-scale diffusion coating formed at low temperature on high-speed steel substrate.” Applied Surface Science, Vol. 437, pp. 257-270, 2018.10.1016/j.apsusc.2017.12.173
    Search in Google ScholarBack to article
  11. [11] A. Vagaska and M. Gombar. “Mathematical Optimization and Application of Nonlinear Programming.” Studies in Fuzziness and Soft Computing, vol. 404, issue 2021, pp. 461-486, 2021.10.1007/978-3-030-61334-1_24
    Search in Google ScholarBack to article
  12. [12] A. Vagaska and M. Gombar. “Comparison of usage of different neural structures to predict AAO layer thickness.” Technicki Vjesnik-Technical Gazette, vol. 24, issue 2, pp. 333-339, 2017.10.17559/TV-20140423164817
    Search in Google ScholarBack to article
  13. [13] L. Straka and S. Hasova. “Optimization of material removal rate and tool wear rate of Cu electrode in die-sinking EDM of tool steel.” International journal of advanced manufacturing technology, vol. 97, no. 5-8, pp. 2647-2654, 2018.
    Search in Google ScholarBack to article
  14. [14] L. Straka and S. Hasova. “Prediction of the heat-affected zone of tool steel EN X37CrMoV5-1 after die-sinking electrical discharge machining.” Journal of engineering manufacture, vol. 232, no. 8, pp. 1395-1406, 2018.
    Search in Google ScholarBack to article
  15. [15] V. Modrak, Z. Soltysova and D. Onofrejova. “Complexity Assessment of Assembly Supply Chains from the Sustainability Viewpoint.” Sustainability, vol. 11, no. 24, pp. 1-15, 2019.10.3390/su11247156
    Search in Google ScholarBack to article
  16. [16] P. Michalik, J. Zajac, M. Hatala, D. Mital and V. Fecova. “Monitoring surface roughness of thin-walled components from steel C45 machining down and up milling.” Measurement, vol. 58, pp. 416-428, 2014.10.1016/j.measurement.2014.09.008
    Search in Google ScholarBack to article
  17. [17] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. “Measurements and evaluation of measurements of vibrations in steel milling process.” Measurement, vol. 106, pp. 18-25, 2017.10.1016/j.measurement.2017.04.023
    Search in Google ScholarBack to article
  18. [18] J. Macala, I. Pandova and A. Panda. Clinoptilolite as a mineral usable for cleaning of exhaust gases. Mineral Resources Management, vol. 25, no. 4, pp. 23-32, 2009.
    Search in Google ScholarBack to article
  19. [19] A. Panda, J. Duplak, J. Jurko and I. Pandova. “Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016”. Applied Mechanics and Materials, vol. 415, pp. 610-613, 2013.10.4028/www.scientific.net/AMM.415.610
    Search in Google ScholarBack to article
  20. [20] A. Panda, J. Jurko and I. Pandova. Monitoring and Evaluation of Production Processes. An Analysis of the Automotive Industry. Springer, Switzerland, 2016, 117 p.10.1007/978-3-319-29442-1
    Search in Google ScholarBack to article
  21. [21] J. Valicek, et al. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials.” Materialwissenschaft und Werkstofftechnik, vol. 47, No. 5-6, pp. 462-471, 2016.10.1002/mawe.201600522
    Search in Google ScholarBack to article
  22. [22] J. Valicek, et al. “Identification of Upper and Lower Level Yield strength in Materials.” Materials, vol. 10, No. 9, 982, 2017.
    Search in Google ScholarBack to article
  23. [23] I. Pandova, A. Panda, J. Valicek, M. Harnicarova, M. Kusnerova and Z. Palkova. “Use of Sorption of Copper Cations by Clinoptilolite for Wastewater Treatment.” Int. J. of Environmental Research and Public Health, vol. 15, no. 7, pp. 1364-1376, 2018.
    Search in Google ScholarBack to article
  24. [24] A. Panda and J. Duplak. “Comparison of Theory and Practice in Analytical Expression of Cutting Tools Durability for Potential Use at Manufacturing of Bearings.” Applied Mechanics and Materials, vol. 616, pp. 300-307, 2014.10.4028/www.scientific.net/AMM.616.300
    Search in Google ScholarBack to article
  25. [25] A. Panda, et al. “Development of the method for predicting the resource of mechanical systems.” International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019.
    Search in Google ScholarBack to article
  26. [26] A. Sedlakova, P. Kurdel and J. Labun. “Simulation of Unmanned Aircraft Vehicle Flight Precision.” LOGI 2019 – Horizons of Autonomous Mobility in Europe, vol. 44, pp. 313-320, 2020.10.1016/j.trpro.2020.02.037
    Search in Google ScholarBack to article
  27. [27] P. Kurdel, J. Labun and F. Adamcik. “The Estimation Method of the Characteristics of an Aircraft with Electromechanic Analogue.” Nase More, vol. 61, No. 1-2, pp. S18-S21, 2014.
    Search in Google ScholarBack to article
  28. [28] S.V. Dzendzerskiy, S.V. Tarasov and I.Y. Kostyukov. Low-power wind plants. Kiev: Naukova dumka, 2011. (in Russian)
    Search in Google ScholarBack to article
  29. [29] S.T. Kashafutdinov and V.N. Lushyn. Atlas of aerodynamic characteristics of wing profiles. Novosibirsk: Publishing House of the S.A. Chaplygin – Siberian Research Institute of Aviation, 1994. (in Russian)
    Search in Google ScholarBack to article
  30. [30] Technical Handbook of Aviation Profiles of the Kiev Aviation Institute. http://kipla.kai.ru/liter/Spravochnic_avia_profiley.pdf [March 24, 2022].
    Search in Google ScholarBack to article
  31. [31] D.N. Gorelov. Aerodynamics of Wind turbines with Vertical Axis. Omsk: Siberian Branch of the Russian Academy of Sciences, Printing Center KAN, 2012. (in Russian)
    Search in Google ScholarBack to article
  32. [32] L.G. Rozhkova. “New shapes of blade profiles of vertical-axial wind plants of medium speed.” Candidate of Technical Sciences Dissertation, Sumy, Ukraine, 2005. (in Russian)
    Search in Google ScholarBack to article
  33. [33] P.K. Chang. Control of flow separation. Moscow: Mir, 1979. (in Russian).
    Search in Google ScholarBack to article
  34. [34] M. Van-Dyke. Album of Liquid and Gas Flows. Moscow: Mir, 1986. (in Russian)
    Search in Google ScholarBack to article
  35. [35] L.G. Rozhkova, T. Krenicky, E.G. Kuznetsov and V.V. Nahornyi. Blades Interaction and Non-Stationarity of Flow in Vertical-Axial Wind Turbines. Management Systems in Production Engineering, vol. 29, issue 4, pp. 280-286, 2021.10.2478/mspe-2021-0035
    Search in Google ScholarBack to article
  36. [36] J. Labun, S. Fabry, M. Ceskovic and P. Kurdel. “Mechanical demodulation of aircraft antenna signal.” 6th International Conference on Air Transport (INAIR), vol. 28, pp. 149-155, 2017.10.1016/j.trpro.2017.12.180
    Search in Google ScholarBack to article
  37. [37] J. Gamec, M. Repko, M. Gamcova, I. Gladisova, P. Kurdel, A. Nekrasov and C. Fidge. “Low Profile Sinuous Slot Antenna for UWB Sensor Networks.” Electronics, vol. 8, issue 2, 2019.10.3390/electronics8020127
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2022-0038 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 298 - 303
Published on: Oct 29, 2022
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
wing profile,
wind turbine,
blade,
lifting force,
pulling force,
aerodynamic characteristics,
angle of attack
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2022 Anton Panda, Lyudmila Rozhkova, Eduard Kuznetsov, Volodymyr Nahornyi, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 30 (2022): Issue 4 (December 2022)Next article