Have a personal or library account? Click to login
Research of Microstructure of Molybden Doped Weldings of Oil and Gas Pipelines Cover

Research of Microstructure of Molybden Doped Weldings of Oil and Gas Pipelines

Management Systems in Production Engineering
Volume 29 (2021): Issue 4 (December 2021)
By: Iveta Pandova,  Miroslav Rimar,  Valery Makarenko,  Yuri Vinnikov,  Andrey Mangura,  Tadeusz Zaborowski and  Valentyn Aloshyn  
Open Access
|Dec 2021

References

  1. [1] V.D. Makarenko, T.P. Fedorina, O.V. Bezpala, S. Yu. Maksimov. “The influence of the pipelines operation term in aggressive environments on the gas content and structure of structural steels”. Solid State Phenomena, vol. 313, pp. 136-142, 2021.10.4028/www.scientific.net/SSP.313.136
    Search in Google ScholarBack to article
  2. [2] V. Makarenko, A. Manhura, I. Makarenko. “Calculation Method of Safe Operation Resource Evaluation of Metal Constructions for Oil and Gas Purpose”. Lecture Notes in Civil Engineering, vol. 73, pp. 641-649, 2020.10.1007/978-3-030-42939-3_63
    Search in Google ScholarBack to article
  3. [3] V. Makarenko, Y. Vynnykov, A. Manhura. “Investigation of the Mechanical Properties of Pipes for Long-Term Cooling Systems”. Lecture Notes in Civil Engineering, vol. 73, pp. 151-16, 2020.10.1007/978-3-030-42939-3_17
    Search in Google ScholarBack to article
  4. [4] V. Makarenko, Y. Vynnykov, A. Liashenko, O. Petrash. “Hydrate Formations Modeling for the Oil and Gas Facilities Reconstruction”. Lecture Notes in Civil Engineering, vol.73, pp. 651-658, 2020.10.1007/978-3-030-42939-3_64
    Search in Google ScholarBack to article
  5. [5] A. Panda, Š. Olejárová, J. Valíček, M. Harničárová. “Monitoring of the condition of turning machine bearing housing through vibrations”. The International Journal of Advanced Manufacturing Technology. vol. 97, no. 1-4, pp. 401-411, 2018.10.1007/s00170-018-1871-7
    Search in Google ScholarBack to article
  6. [6] A. Panda, J. Dobránsky, M. Jančík, I. Pandova, M. Kačalová. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies”. Metalurgija, vol. 57, no. 4, pp. 353-356, 2018.
    Search in Google ScholarBack to article
  7. [7] A.D. Mikhalev, K. A. Dyadyura, I. Lebedinskyi, S.N. Bratushka, Y.O. Kravchenko. “Structure, morphology, and elemental-phase composition of j02002 steel as a result of electrolytic-plasma processing”. High Temperature Material Processes, 23(1), pp. 25-36, 2019.10.1615/HighTempMatProc.2019029353
    Search in Google ScholarBack to article
  8. [8] J. Valíček, M. Harničárová, I. Hlavatý, R. Grznárik, M. Kušnerová, Z. Hutyrová, A. Panda. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials”. Materialwissenschaft und Werkstofftechnik, vol. 47, no. 5-6, pp. 462-471, 2016.10.1002/mawe.201600522
    Search in Google ScholarBack to article
  9. [9] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček, J. Kmec. “Development of the method for predicting the resource of mechanical systems”. The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 1563-1571, 2019.
    Search in Google ScholarBack to article
  10. [10] J. Mačala, I. Pandová, A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases”. Gospodarka Surowcami Mineralnymi/Mineral Resources Management, vol. 33(1), pp. 125-138, 2017.10.1515/gospo-2017-0005
    Search in Google ScholarBack to article
  11. [11] J. Valíček, M. Harničárová, I. Kopal, Z. Palková, M. Kušnerová, A. Panda, V. Šepelák. “Identification of Upper and Lower Level Yield strength in Materials”. Materials, vol. 10, no. 9 pp. 1-20, 2017.10.3390/ma10090982561563728832526
    Search in Google ScholarBack to article
  12. [12] A.D. Pogrebjak, A.S. Krivets, K.A. Dyadyura, O.V. Maksakova, Zh.K. Shaimardanov, B. Peplinska. “Research of the relief and element composition of the surface coatings based on hydroxyapatite implants from titanium alloys”. Nanomaterials: Applications & Properties (NAP–2016), vol. 5, no 2, 2016.10.1109/NAP.2016.7757290
    Search in Google ScholarBack to article
  13. [13] V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova. “Implementation of Integrated Management System in Order to Enhance Equipment Efficiency”. Management Systems in Production Engineering, vol. 10, no. 4, pp. 221-226, 2019.10.1515/mspe-2019-0035
    Search in Google ScholarBack to article
  14. [14] V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova, T. Zaborowski. “Enhancing efficiency by implementation of integrated management system in order to align organisational culture and daily practice”. Management Systems in Production Engineering, 28(4), pp. 304-311, 2020.10.2478/mspe-2020-0043
    Search in Google ScholarBack to article
  15. [15] V. Zaloga, K. Dyadyura, I. Rybalka, I. Pandova. “Implementation of Integrated Management System in Order to Enhance Equipment Efficiency”. Management Systems in Production Engineering, vol. 27, no. 4, pp. 221-226, 2019.10.1515/mspe-2019-0035
    Search in Google ScholarBack to article
  16. [16] A. Panda, M. Hatala, K. Dyadyura, J. Duplak, A. Yunak. “Machinability research by new abrasionresistant cast irons cutting”. Key Engineering Materials, 669, pp. 118-126, 2016.10.4028/www.scientific.net/KEM.669.118
    Search in Google ScholarBack to article
  17. [17] Т.P. Hоvоrun, O.V. Pylypenko, M.V. Hovorun, K.O. Dyadyura. “Methods of Obtaining and Properties of Wear–resistant Coatings Based on Ti and N and Ti, Al and N”, J. Nano- Electron. Phys., vol. 9 no 2, 02026, 2017.10.21272/jnep.9(2).02026
    Search in Google ScholarBack to article
  18. [18] K. Dyadyura, T.P. Hovorun, O.V. Pylypenko, M.V. Hovorun, V.I. Pererva. “Influence of roughness of the substrate on the structure and mechanical properties of TiAlN nano-coating condensed by DCMS”. Proceedings of the 2017 IEEE 7th International Conference on Nanomaterials: Applications and Properties, NAP–2017, 01FNC10, 2017.10.1109/NAP.2017.8190202
    Search in Google ScholarBack to article
  19. [19] M. Miglierini, T. Kanuch, T. Krenicky, I. Skorvanek. “Magnetic and Mossbauer studies of Fe76Mo8Cu1B15 nano-crystalline alloy”. Czechoslovak Journal of Physics, vol. 54, pp. 73-76, 2004.10.1007/s10582-004-0033-3
    Search in Google ScholarBack to article
  20. [20] A. Panda, J. Dobránsky, M. Jančík, I. Pandová and M. Kačalová. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies”. Metalurgija, vol. 57, no. 4, pp. 353-356, 2018.
    Search in Google ScholarBack to article
  21. [21] R.S. Turtelli, et al. “Magnetic and structural characterization of as-cast and annealed melt- spun Fe80-xSi20Crx”. Journal of Magnetism and Magnetic Materials, vol. 304, no. 2, pp. E687-E689, 2006.10.1016/j.jmmm.2006.02.171
    Search in Google ScholarBack to article
  22. [22] A.S. Chaus, et al. “Complex fine-scale diffusion coating formed at low temperature on high-speed steel substrate”. Applied Surface Science, vol. 437, pp. 257-270, 2018.10.1016/j.apsusc.2017.12.173
    Search in Google ScholarBack to article
  23. [23] A. Panda and J. Duplak. “Comparison of theory and practice in analytical expression of cutting tools durability for potential use at manufacturing of bearings”. Applied Mechanics and Materials, vol. 616, pp. 300-307, 2014.10.4028/www.scientific.net/AMM.616.300
    Search in Google ScholarBack to article
  24. [24] Ľ. Straka, I. Čorný and J. Piteľ. “Properties evaluation of thin microhardened surface layer of tool steel after wire EDM”. Metals, vol. 6, no. 5, pp. 1-16, 2016.10.3390/met6050095
    Search in Google ScholarBack to article
  25. [25] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. “Research of annealing process in laboratory conditions”. Measurement, vol. 73, 2015, pp. 607–618. ISSN 0263-2241.10.1016/j.measurement.2015.06.008
    Search in Google ScholarBack to article
  26. [26] K. Monkova and P. Monka. “Some aspects influencing production of porous structures with complex shapes of cells”. Lecture Notes in Mechanical Engineering, pp. 267-276, 2017.10.1007/978-3-319-56430-2_19
    Search in Google ScholarBack to article
  27. [27] J. Dobránsky, M. Pollák and Z. Doboš. “Assessment of production process capability in the serial production of components for the automotive industry”. Management Systems in Production Engineering, vol. 27, no. 4, pp. 255-258, 2019.10.1515/mspe-2019-0040
    Search in Google ScholarBack to article
  28. [28] W. Bialy and J. Ružbarský. “Breakdown cause and effect analysis. Case study”. Management Systems in Production Engineering, vol. 26, pp. 83-87, 2018.10.1515/mspe-2018-0013
    Search in Google ScholarBack to article
  29. [29] L. Sukhodub, A. Panda, L. Sukhodub, M. Kumeda, K. Dyadyura and I. Pandová. “Hydroxyapatite and zinc oxide based two-layer coating, deposited on ti6al4v substrate”, MM Science Journal, pp. 3494-3499, (2019).10.17973/MMSJ.2019_12_2019030
    Search in Google ScholarBack to article
  30. [30] Ľ. Straka, I. Čorný and J. Piteľ. “Prediction of the geometrical accuracy of the machined surface of the tool steel EN X30WCrV9-3 after electrical discharge machining with CuZn37 wire electrode”. Metals, vol. 7, no. 11, pp. 1-19, 2017.10.3390/met7110462
    Search in Google ScholarBack to article
  31. [31] D. Duplakova, L. Knapcikova, M. Hatala and E. Szilagyi. “Mathematical modelling of temperature characteristics of RFID tags with their subsequent application in engineering production”. TEM Journal-Technology Education Management Informatics, vol. 5, pp. 411-416, 2016.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2021-0034 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 274 - 279
Published on: Dec 14, 2021
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
structure,
fracture,
corrosion,
crystal lattice,
non–metallic inclusions
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2021 Iveta Pandova, Miroslav Rimar, Valery Makarenko, Yuri Vinnikov, Andrey Mangura, Tadeusz Zaborowski, Valentyn Aloshyn, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 29 (2021): Issue 4 (December 2021)Next article