Have a personal or library account? Click to login
Enhancing Efficiency by Implementation of Integrated Management System in Order to Align Organisational Culture and Daily Practice Cover

Enhancing Efficiency by Implementation of Integrated Management System in Order to Align Organisational Culture and Daily Practice

Management Systems in Production Engineering
Volume 28 (2020): Issue 4 (December 2020)
By: Viliam Zaloga,  Konstiantyn Dyadyura,  Iryna Rybalka,  Iveta Pandova and  Tadeusz Zaborowski  
Open Access
|Aug 2020

References

  1. [1] M. Bengtsson, E. Alfredsson, M. Cohen, S. Lorek, P. Schroeder. “Transforming systems of consumption and production for achieving the sustainable development goals: moving beyond efficiency”. Sustainability Science, vol. 13, pp. 1533-1547, 2018.
    Search in Google ScholarBack to article
  2. [2] A. Panda, K. Dyadyura, J. Valicek, M. Harnicarova, J. Zajac, V. Modrak, I. Pandova, P. Vrabel, E. Novakova-Marcincinova and Z. Pavelek. “Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene”. Materials, vol. 10, no. 4, pp. 337, 2017.10.3390/ma10040377550690828772733
    Search in Google ScholarBack to article
  3. [3] J. Valicek, M. Harnicarova, A. Panda, I. Hlavaty, M. Kusnerova, H. Tozan, M. Yagimli and V. Vaclavik. “Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface”. Machining, joining and modifications of advanced materials, vol. 61, pp. 111-120, 2016.10.1007/978-981-10-1082-8_12
    Search in Google ScholarBack to article
  4. [4] L.Y. Wang, H.H. Huang, R.W. West, D.Z. Wang. “Intelligent manufacturing system of impeller for computer numerical control (CNC) programming based on KBE”. J. Cent. South Univ., vol. 21, pp. 4577-4584, 2014.
    Search in Google ScholarBack to article
  5. [5] M. Borsato. “Bridging the gap between product lifecycle management and sustainability in manufacturing through ontology building”. Computers in Industries, vol. 65, no. 2, pp. 258-269, 2014.10.1016/j.compind.2013.11.003
    Search in Google ScholarBack to article
  6. [6] E. Pallaro and N. Subramanian “Sustainable production and consumption in the automotive sector: Integrated review framework and research directions”. Sustainable Production and Consumption, vol. 4, pp. 47-61, 2015.10.1016/j.spc.2015.07.002
    Search in Google ScholarBack to article
  7. [7] J. Walls and R. Paquin. “Organizational perspectives of industrial symbiosis: a review and synthesis”. Org Environ., vol. 28, no. 1, pp. 32-53, 2015.10.1177/1086026615575333
    Search in Google ScholarBack to article
  8. [8] V. Moreau, M. Sahakian, P. van Griethuysen, F. Vuille. “Coming full circle: why social and institutional dimensions matter for the circular economy”. J Ind Ecol., vol. 21, no. 3, pp. 497-506, 2017.10.1111/jiec.12598
    Search in Google ScholarBack to article
  9. [9] K. Govindan and M. Hasanagic. “A systemic review on drivers, barriers, and practices towards circular economy: a supply chain perspective”. Int J Prod Res, vol. 56, no. 1-2, pp. 278-311, 2018.10.1080/00207543.2017.1402141
    Search in Google ScholarBack to article
  10. [10] A. Panda, J. Duplak, J. Jurko and M. Behun. “Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6”, Advanced Materials Research, vol. 340, pp. 30-33, 2011.10.4028/www.scientific.net/AMR.340.30
    Search in Google ScholarBack to article
  11. [11] K. Xing, H.-F. Wang, W. Qian. “A sustainability-oriented multi-dimensional value assessment model for product-service development”. International Journal of Production Research, vol. 51, no. 19, pp. 5908-5933, 2013.
    Search in Google ScholarBack to article
  12. [12] O. Dynnyk, Y. Denysenko, V. Zaloga, O. Ivchenko and T. Yashyna. “Information support for the quality management system assessment of engineering enterprises”. DSMIE 2019: Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 65-74, 2019.10.1007/978-3-030-22365-6_7
    Search in Google ScholarBack to article
  13. [13] Y. Denysenko, O. Dynnyk, T. Yashyna, N. Malovana and V. Zaloga. Implementation of CALS-Technologies in quality management of product life cycle processes. DSMIE 2019: Advances in Design, Simulation and Manufacturing II. Lecture Notes in Mechanical Engineering, pp. 3-12, 2019.10.1007/978-3-319-93587-4_1
    Search in Google ScholarBack to article
  14. [14] E. Sujová and H. Čierna. “Optimization and Improvement of Test Processes on a Production Line”. Management Systems in Production Engineering, vol. 26, no. 2, pp. 88-92, 2019.10.2478/mspe-2018-0014
    Search in Google ScholarBack to article
  15. [15] T.P. Sharashkina. “Methodical aspects of organization and carrying out of functional-cost analysis on the basis of process approach for the purpose of expenses and quality optimization”. European Research Studies, vol. XIX, issue 3, part B, pp. 77-96, 2016.10.35808/ersj/565
    Search in Google ScholarBack to article
  16. [16] M. Balara, D. Duplakova and D. Matiskova. “Application of a signal averaging device in robotics 2018”. Measurement, vol. 115, pp. 125-132, 2018.10.1016/j.measurement.2017.10.037
    Search in Google ScholarBack to article
  17. [17] A. Panda, Š. Olejárová, J. Valíček and M. Harničárová. “Monitoring of the condition of turning machine bearing housing through vibrations”. International Journal of Advanced Manufacturing Technology, vol. 97, no. 1-4, pp. 401-411, 2018.10.1007/s00170-018-1871-7
    Search in Google ScholarBack to article
  18. [18] H. Dong Wang, G. Le Chang, J. Ping Deng, J. Jie Zheng and Y. Lin Zhao. “Theoretical Research on New Method of Highway Engineering Quality Supervision and Management-Comprehensive Six Sigma Quality Management”. Applied Mechanics and Materials, vols. 584-586, pp. 2250-2263, 2014.
    Search in Google ScholarBack to article
  19. [19] J. Valicek, M. Harnicarova, I. Kopal, Z. Palková, M. Kušnerová, A. Panda and V. Šepelák. “Identification of Upper and Lower Level Yield strength in Materials”. Materials, vol. 10, no. 9, pp. 1-20, 2017.10.3390/ma10090982561563728832526
    Search in Google ScholarBack to article
  20. [20] M. Durdan, B. Stehlikova, M. Pastor, J. Kacur, M. Laciak and P. Flegner. “Research of annealing process in laboratory conditions”. Measurement, vol. 73, 2015, pp. 607-618.10.1016/j.measurement.2015.06.008
    Search in Google ScholarBack to article
  21. [21] A. Panda, J. Dobránsky, M. Jančík, I. Pandová and M. Kačalová. “Advantages and effectiveness of the powder metallurgy in manufacturing technologies”. Metalurgija, vol. 57, no. 4, pp. 353-356, 2018.
    Search in Google ScholarBack to article
  22. [22] J. Valicek, M. Harnicarova, I. Hlavaty, R. Grznárik, M. Kusnerova, Z. Mitaľová and A. Panda. “A new approach for the determination of technological parameters for hydroabrasive cutting of materials”. Materialwissenschaft und Werkstofftechnik, vol. 47, pp. 462-471, 2016.10.1002/mawe.201600522
    Search in Google ScholarBack to article
  23. [23] I. Pandova, T. Gondova and K. Dubayova. “Natural and Modified Clinoptilolite Testing for Reduction of Harmful Substance in Manufacturing Exploitation”. Advanced Materials Research, vols. 518-523, pp. 1757-1760, 2012.
    Search in Google ScholarBack to article
  24. [24] J. Macala, I. Pandova, T. Gondova and K. Dubayova. “Reduction of polycyclic aromatic hydrocarbons and nitrogen monooxide in combustion engine exhaust gases by clinoptilolite”. Gospodarka Surowcami Mineralnymi, vol. 28, no. 2, pp. 113-123, 2012.10.2478/v10269-012-0015-1
    Search in Google ScholarBack to article
  25. [25] J. Macala, I. Pandova and A. Panda. “Zeolite as a prospective material for the purification of automobile exhaust gases”. Mineral resources management, vol. 33, no. 1, pp. 125-138, 2017.10.1515/gospo-2017-0005
    Search in Google ScholarBack to article
  26. [26] Z. Murcinkova and T. Krenicky. “Applications utilizing the damping of composite microstructures for mechanisms of production machines and manipulator devices.” In: 13th Int. Multidisciplinary Sci. Geoconf. SGEM 2013, Albena, Bulgaria. June 16-22, 2013. Book Series: Int. Multidisciplinary Scientific GeoConference-SGEM, pp. 23-30, 2013.
    Search in Google ScholarBack to article
  27. [27] A. Panda, V. Nahornyi, I. Pandová, M. Harničárová, M. Kušnerová, J. Valíček and J. Kmec. “Development of the method for predicting the resource of mechanical systems”. International Journal of Advanced Manufacturing Technology, vol. 105, no. 1-4, pp. 1563-1571, 2019.
    Search in Google ScholarBack to article
  28. [28] T. Krenicky. “Monitoring of Technical Systems Operation Using Virtual Instrumentation”. Strojarstvo extra, no. 5, pp. 25/1-25/2, 2010. ISSN 1335-2938.
    Search in Google ScholarBack to article
  29. [29] S. Olejarova, J. Dobransky, J. Svetlik and M. Pituk. “Measurements and evaluation of measurements of vibrations in steel milling process”. Measurement, vol. 106, pp. 18-25, 2017.10.1016/j.measurement.2017.04.023
    Search in Google ScholarBack to article
  30. [30] M. Rimar, M. Fedak, A. Kulikov and P. Smeringai. “Study of gaseous flows in closed area with forced ventilation.” MM Science Journal, vol. 2018, no. March, pp. 2188-2191, 2018.
    Search in Google ScholarBack to article
  31. [31] J. Dobránsky, M. Pollák and Z. Doboš. “Assessment of production process capability in the serial production of components for the automotive industry”. Management Systems in Production Engineering, vol. 27, no. 4, pp. 255-258, 2019.10.1515/mspe-2019-0040
    Search in Google ScholarBack to article
  32. [32] M. Pollák, J. Torok, J. Zajac, M. Kočiško and M. Teliskova. “The structural design of 3D print head and execution of printing via the robotic arm ABB IRB 140”. ICIEA 2018, vol. 2018, pp. 194-198, 2018.
    Search in Google ScholarBack to article
  33. [33] W. Bialy and J. Ružbarský. “Breakdown cause and effect analysis. Case study”. Management Systems in Production Engineering, vol. 26, pp. 83-87, 2018.10.1515/mspe-2018-0013
    Search in Google ScholarBack to article
  34. [34] D. Duplakova, L. Knapcikova, M. Hatala and E. Szilagyi. “Mathematical modelling of temperature characteristics of RFID tags with their subsequent application in engineering production”. TEM Journal-Technology Education Management Informatics, vol. 5, pp. 411-416, 2016.
    Search in Google ScholarBack to article
  35. [35] J. Kascak, P. Baron, M. Teliskova, J. Zajac, J. Torok and J. Husar. “Implementation of augmented reality into the training and educational process in order to support spatial perception in technical documentation”. 6th IEEE international conference on industrial engineering and applications, pp. 583-587, 2019.10.1109/IEA.2019.8715120
    Search in Google ScholarBack to article
  36. [36] R. Bielousova. “Developing materials for English for specific purposes online course within the blended learning concept”. TEM Journal-Technology Education Management Informatics, vol. 6, pp. 637-642, 2017.
    Search in Google ScholarBack to article
  37. [37] Ľ. Straka, I. Čorný and J. Piteľ. “Properties evaluation of thin micro hardened surface layer of tool steel after wire EDM”. Metals, vol. 6, no. 5, pp. 1-16, 2016.10.3390/met6050095
    Search in Google ScholarBack to article
  38. [38] K. Monkova and P. Monka. “Some aspects influencing production of porous structures with complex shapes of cells”. Lecture Notes in Mechanical Engineering, pp. 267-276, 2017.10.1007/978-3-319-56430-2_19
    Search in Google ScholarBack to article
  39. [39] Ľ. Straka, I. Čorný and J. Piteľ. “Prediction of the geometrical accuracy of the machined surface of the tool steel EN X30WCrV9-3 after electrical discharge machining with CuZn37 wire electrode”. Metals, vol. 7, no. 11, pp. 1-19, 2017.10.3390/met7110462
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2020-0043 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 304 - 311
Submitted on: Apr 1, 2020
Accepted on: Jul 1, 2020
Published on: Aug 17, 2020
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
complex technical system,
integrated management system,
standards,
sustainable operations,
product lifecycle management (PLM)
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2020 Viliam Zaloga, Konstiantyn Dyadyura, Iryna Rybalka, Iveta Pandova, Tadeusz Zaborowski, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 28 (2020): Issue 4 (December 2020)Next article