Have a personal or library account? Click to login
Energy Recuperation as One of the Factors Improving the Energy Efficiency of Mining Battery Locomotives Cover

Energy Recuperation as One of the Factors Improving the Energy Efficiency of Mining Battery Locomotives

Management Systems in Production Engineering
Volume 28 (2020): Issue 4 (December 2020)
By: Bartosz Polnik,  Krzysztof Kaczmarczyk,  Andrzej Niedworok,  Ralph Baltes and  Elisabeth Clausen  
Open Access
|Aug 2020

References

  1. [1] A. Cifci, Y. Uyaroglu, S. Birbas “Direct Field Oriented Controller Applied to Observe Its Advantages over Scalar Control”, Electronics and Electrical Engineering, vol. 3(119). pp. 15-15, 2012.10.5755/j01.eee.119.3.1355
    Search in Google ScholarBack to article
  2. [2] A. Ejlali, D.A. Khaburi, J. Soleimani, “Sensorless Field Oriented Control Strategy for Single Phase Line-Start PMSM Drive”, Electrical Review, vol. 10, pp. 229-232, 2012.
    Search in Google ScholarBack to article
  3. [3] A. Morshedlou, H. Dehghani, S.H. Hoseinie. “A data driven decision making approach for long-wall mining production enhancement”, Mining Science, vol. 26, pp. 7-21, 2019.10.37190/msc192601
    Search in Google ScholarBack to article
  4. [4] B. Polnik, Z. Budzyński, B. Miedziński. “Effective control of a battery supplied mine locomotive unit” – Elektronika i Elektrotechnika, vol 3, pp. 39-43, 2014.10.5755/j01.eee.20.3.3319
    Search in Google ScholarBack to article
  5. [5] B. Polnik, B. Miedziński. “Hydrogen explosive risk in mining locomotive unit”, ECS Transaction, vol. 63(1), pp. 159-166, 2014.10.1149/06301.0159ecst
    Search in Google ScholarBack to article
  6. [6] D. Prostański, M. Vargová, “Installation optimization of airand-water sprinklers at belt conveyor transfer points in the aspect of ventilation air dust reduction efficiency”, Acta Montanistica Slovaca, vol. 23(4), pp. 422-432, 2018.
    Search in Google ScholarBack to article
  7. [7] D. Sha, D. Chen, J. Zhang, “A Bidirectional Three-Level DCDC Converter With Reduced Circulating Loss and Fully ZVS Achievement for Battery Charging/Discharging”, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, pp. 2-2, 2018.10.1109/JESTPE.2017.2778039
    Search in Google ScholarBack to article
  8. [8] E. Bayoumi, “Deadbeat Direct Torque Control for Permanent Magnet Synchronous Motors Using Particle Swarm Optimization”, International Journal of Power Electronics, vol. 5(4), 2013.10.1504/IJPELEC.2013.058664
    Search in Google ScholarBack to article
  9. [9] H. Jouybari-Moghaddam, A. Alimardani, S. Hosseinian. „ Influence of electric vehicle charging rates on transformer derating in harmonic-rich battery charger applications”, Archives of Electrical Engineering, vol. 61, pp. 483-497, 2012.10.2478/v10171-012-0037-8
    Search in Google ScholarBack to article
  10. [10] J. Tokarczyk, “Method for identification of results of dynamic overloads in assessment of safety use of the mine auxiliary transportation system”, Arch. Min. Sci., vol. 61(4), pp. 765-777, 2016.10.1515/amsc-2016-0052
    Search in Google ScholarBack to article
  11. [11] L. Anbazhagan, J. Ramiah, V. Krishnaswamy, D.N. Jayachandran. “Comprehensive Review on Bidirectional Traction Converter for Electric Vehicles”, International Journal of Electronics and Telecommunications, vol. 65(4), pp. 635-649, 2019.
    Search in Google ScholarBack to article
  12. [12] L. Schuch, C. Rech, H.L.Hey, H.A. Gründling, H. Pinheiro, J.R. Pinheiro, “Analysis and design of a new high-efficiency bidirectional integrated ZVT PWM converter for DC-bus and battery bank interface”, IEEE Transaction Industrial Application, vol. 42(5), pp. 1321-1332, 2006.
    Search in Google ScholarBack to article
  13. [13] L. Qin, X. Zhou, P. Cao, “New Control Strategy for PMSM Driven Bucket Wheel Reclaimers using GA-RBF Neural Network and Sliding Mode Control”, Elektronika i Elektrotechnika, vol. 6(122), pp. 113-113, 2012.10.5755/j01.eee.122.6.1834
    Search in Google ScholarBack to article
  14. [14] M.S. Ahmed, N.A.A. Manap, M. Faeq, D. Ishak, “Improved torque in PM brushless motors with minimum difference in slot number and pole number”, Journal of Power and Energy Conversion, vol. 3 (3/4). pp. 206-219, 2012.10.1504/IJPEC.2012.048046
    Search in Google ScholarBack to article
  15. [15] P. Vas, “Vector Control of AC Machines” Clarendon Press Oxford, 1990.
    Search in Google ScholarBack to article
  16. [16] R. Dolecek, O. Cerny, J. Novak, M. Bartłomiejczyk, “Interference in power system for traction drive with PMSM”, Electrical Review, vol. 9. pp. 204-207, 2012.
    Search in Google ScholarBack to article
  17. [17] S. Geng, Y. Zhang, H. Qiu, C. Yang, R. Yi. “Influence of harmonic voltage coupling on torque ripple of permanent magnet synchronous motor”, Archives of Electrical Engineering, vol. 66, pp. 399-410, 2019.
    Search in Google ScholarBack to article
  18. [18] S. Guo, J. He, “Sensorless control of PMSM based on adaptive sliding mode observer” International Journal of Modelling, “Identification and Control”, Inderscience Enterprises Ltd, vol. 4, pp. 321-324, 2009.10.1504/IJMIC.2009.027883
    Search in Google ScholarBack to article
  19. [19] Y. Turygin, P. Bozek, I. Abramov, Y. Niíkitin. Reliability determination and diagnostics of a mechatronic system. Advances in Science and Technology Research Journal. Vol. 12, iss. 2, pp. 274-290, 2018.10.12913/22998624/92298
    Search in Google ScholarBack to article
  20. [20] T. Biskup, “Initial rotor position estimation of permanent magnet synchronous machine”, Electrical Review, vol. 4, pp. 157-162, 2012.
    Search in Google ScholarBack to article
  21. [21] T. Raffeinner, “Tailored transport”, World Coal, No 9, pp. 99-100, 2005.
    Search in Google ScholarBack to article
  22. [22] Vanysek, P., Novak, V. Availability of Suitable Raw Materials Determining the Prospect for Energy Storage Systems Based on Redox Flow Batteries. Acta Montanistica Slovaca, Volume 23, Issue 1, 2018, pp. 90-99.
    Search in Google ScholarBack to article
  23. [23] M. Baranov, P. Bozek, V. Prajova, T. Ivanova, D. Novokshonov, A. Korshunov. Constructing and calculating of multistage sucker rod string according to reduced stress. Acta Montanistica Slovaca. Volume 22, Issue 2, 2017, pp. 107-115.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2020-0036 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 253 - 258
Submitted on: Mar 1, 2020
Accepted on: Jul 1, 2020
Published on: Aug 17, 2020
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
battery supply,
energy recuperation,
hydrogen emission,
mine locomotive unit,
PMSM drive
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2020 Bartosz Polnik, Krzysztof Kaczmarczyk, Andrzej Niedworok, Ralph Baltes, Elisabeth Clausen, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 28 (2020): Issue 4 (December 2020)Next article