Have a personal or library account? Click to login

Evaluation the Stress-Strain State of Pumping Equipment in the Curvilinear Sections of the Wells

Management Systems in Production Engineering
Volume 28 (2020): Issue 3 (September 2020)
By:
Open Access
|Jul 2020

References

  1. [1] B.S. Aadnoy, M. Fazaelizadeh, and G. Hareland, “A 3D analytical model for wellbore friction,” Journal of Canadian Petroleum Technology, vol. 49, no. 10, pp. 25-36, 2010. doi: 10.2118/141515-PA.10.2118/141515-PA
    Search in Google ScholarBack to article
  2. [2] A. Andrusyak, J. Grydzhuk, A. Dzhus, and I. Steliga, “Developing a method for the assessment of axial load in arbitrary cross-sections of the column of pumping rods,” Eastern-European Journal of Enterprise Technologies, vol. 1, no. 7, pp. 32-37, 2017. doi:10.15587/1729-4061.2017.92860.10.15587/1729-4061.2017.92860
    Search in Google ScholarBack to article
  3. [3] A.V. Degovtsov, T.R. Dolov, S.V. Krivenkov, B.V. Kuznetsov, S.S. Pekin, and A.A. Sabirov, “Determination of Fatigue Strength of Electric Submersible Pumps Shafts,” Territorija «NEFTEGAS» – Oil and Gas Territory, no. 5, pp. 26-32, 2018.
    Search in Google ScholarBack to article
  4. [4] A.V. Degovtsov, V.N. Ivanovsky, S.V. Krivenkov, I.V. Kuznetsov, A.A. Lavrinenko, A.R. Mukhametshin, and A.A. Sabirov, “Analysis of the causes of fatigue failures of the ESP units shafts,” Equipment and Technologies for Oil and Gas Complex, no. 2, pp. 27-33, 2018. doi: 10.30713/1999-6934-2018-2-27-33.10.30713/1999-6934-2018-2-27-33
    Search in Google ScholarBack to article
  5. [5] A. Dzhus, A. Andrusyak, J. Grydzhuk, and T. Romanyshyn, “Development of the method for estimating serviceability of equipment for the transportation of compressed natural gas,” Eastern-European Journal of Enterprise Technologies. vol. 4, no. 7, pp. 67-73, 2018. doi: 10.15587/1729-4061.2018.139603.10.15587/1729-4061.2018.139603
    Search in Google ScholarBack to article
  6. [6] Z.-M. Feng, J.-J. Tan, Q. Li, and X. Fang, “A review of beam pumping energy-saving technologies,” Journal of Petroleum Exploration and Production Technology, vol. 8, no. 1, pp. 299-311, 2018. doi: 10.1007/s13202-017-0383-6.10.1007/s13202-017-0383-6
    Search in Google ScholarBack to article
  7. [7] N.M. Ishmurzin, Т.N. Khoanh, and R.N. Ponomarev, “About choice of an interval of placing of a pumping unit in the directed wells,” Petroleum Engineering, no.1, 2006.
    Search in Google ScholarBack to article
  8. [8] V. Kharun, A. Dzhus, I. Gladj, P. Raiter, T. Yatsiv, N. Hedzyk, O. Hryhoruk, and S. Kasatkin, “Improving a technique for the estimation and adjustment of counterbalance of sucker-rod pumping units’ drives,” Eastern-European Journal of Enterprise Technologies, vol. 6, no. 1, pp. 40-46, 2018. doi: 10.15587/1729-4061.2018.150794.10.15587/1729-4061.2018.150794
    Search in Google ScholarBack to article
  9. [9] L.-M. Lao and H. Zhou, “Application and effect of buoyancy on sucker rod string dynamics,” Journal of Petroleum Science and Engineering, vol. 146, pp. 264-271, 2016. doi: 10.1016/j.petrol.2016.04.029.10.1016/j.petrol.2016.04.029
    Search in Google ScholarBack to article
  10. [10] P.A. Lollback, G.Y. Wang, and S.S. Rahman, “An alternative approach to the analysis of sucker-rod dynamics in vertical and deviated wells,” Journal of Petroleum Science and Engineering, no. 17 (3-4), pp. 313-320, 1997. doi: 10.1016/S0920-4105(96)00070-8.10.1016/S0920-4105(96)00070-8
    Search in Google ScholarBack to article
  11. [11] Q. Li, B. Chen, Z. Huang, H. Tang, G. Li, and L. He, “Study on Equivalent Viscous Damping Coefficient of Sucker Rod Based on the Principle of Equal Friction Loss,” Mathematical Problems in Engineering, vol. 2019, 2019. doi: 10.1155/2019/9272751.10.1155/2019/9272751
    Search in Google ScholarBack to article
  12. [12] R.N. Ponomarev and N.M. Ishmurzina, “Research of density of emergency refusals of affected by the operating time of diving centrifugal pumps installations of centrifugal from their operating time,” Petroleum Engineering, vol. 4, no.1, pp. 221-224, 2006.
    Search in Google ScholarBack to article
  13. [13] R.N. Ponomarev and N.M. Ishmurzin, “Analysis of emergency failures due to construction of wells and electric centered pump installations,” Petroleum Engineering, no. 2, 2006.
    Search in Google ScholarBack to article
  14. [14] R. Rachkevych, “Application of rod mechanics fundamentals for analysis of stress-strain state of the tubing,” Technology Audit And Production Reserves, vol. 5, no. 1(31), pp. 35-44, 2016. doi: 10.15587/2312-8372.2016.79609.10.15587/2312-8372.2016.79609
    Search in Google ScholarBack to article
  15. [15] A. Sikal, J. Boulet, S. Menand, and H. Sellami, “Drill Pipe Stress and Cumulative Fatigue Analysis in Complex Wells Drilling: New Approach in Fatigue Optimization”. 2008 SPE Annual Technical Conference and Exhibition held. (Denver, 21-24 Sept. 2008), Denver, pp. 1-17, 2008.10.2118/116029-MS
    Search in Google ScholarBack to article
  16. [16] V.A. Svetlitskyi, Mechanics of rods: Tutorial for high school. Part 1. Static. Moscow, 1987.
    Search in Google ScholarBack to article
  17. [17] A. Velychkovych, I. Petryk, and L. Ropyak, “Analytical Study of Operational Properties of a Plate Shock Absorber of a Sucker-Rod String,” Shock and Vibration, vol. 2020, article ID 3292713, 2020. doi: 10.1155/2020/3292713.10.1155/2020/3292713
    Search in Google ScholarBack to article
  18. [18] D.-Y. Wang and H.-Z. Liu, “Dynamic modeling and analysis of sucker rod pumping system in a directional well,” Lecture Notes in Electrical Engineering, vol. 408, pp. 1115-1127, 2017. doi: 10.1007/978-981-10-2875-5_90.10.1007/978-981-10-2875-5_90
    Search in Google ScholarBack to article
  19. [19] A. Wu, G. Hareland, and M. Fazaelizadeh, “Torgue and Drag Analysis Using Finite Elements Method,” Modern Applied Science, vol. 5, no. 6, pp. 13-27, 2011.10.5539/mas.v5n6p13
    Search in Google ScholarBack to article
  20. [20] M. Xing and S. Dong, “An improved longitudinal vibration model and dynamic characteristic of sucker rod string,” Journal of Vibroengineering, vol. 16, no. 7, pp. 3432-3448, 2014.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2020-0028 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 189 - 195
Submitted on: Jan 1, 2020
Accepted on: Jun 1, 2020
Published on: Jul 17, 2020
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
well,
inclinometry,
pumping equipment,
deformation,
stress
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2020 Andriy Dzhus, Ruslan Rachkevych, Andriy Andrusyak, Iryna Rachkevych, Oleksandr Hryhoruk, Serhii Kasatkin, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 28 (2020): Issue 3 (September 2020)Next article