Have a personal or library account? Click to login
Partial Cases of Stressed-Deformed Condition of Casing and Pump Compressor Pipes Cover

Partial Cases of Stressed-Deformed Condition of Casing and Pump Compressor Pipes

Management Systems in Production Engineering
Volume 28 (2020): Issue 2 (June 2020)
By: Vitalii Vasylyshyn,  Iryna Taras,  Iryna Bekish,  Olena Kornuta and  Volodymyr Kornuta  
Open Access
|May 2020

References

  1. [1] A.P. Farr. “Torque requiments for rotary-shouldered connections and selection of Connetions for drill collars”. The American Society of Mechanical Engineers, vol. 57, 1957, 305p.
    Search in Google ScholarBack to article
  2. [2] I.D, Faux, M.J. Pratt. Computational Geometry for Design and Manufacture. Chichester, West Sussex, John Willey & sons, 1979.
    Search in Google ScholarBack to article
  3. [3] I.D. Faux, M.J. Pratt. Computational Geometry for Design and Manufacture (Mathematics and Its Applications) Ellis Horwood; New Ededition, 1981.
    Search in Google ScholarBack to article
  4. [4] A. Fox. Computational geometry. Application in design and production. Moskwa, 1982.
    Search in Google ScholarBack to article
  5. [5] V. Hauk., H. Hillemann, H. Kochler. “Schwingende Langskraft und Drehmoment beanspruchung von Bohrgestanden”. Erdol und Kohle – Erdgas – Petrochemie, vol. 7, 1965, pp. 514-552.
    Search in Google ScholarBack to article
  6. [6] E. Kryzhanovsky, V. Ivasiv, V. Vasylyshyn, R. Rachkevich. “Fatigue life of threaded pipe connections in curved sections of wells”. Scientific Bulletin National Mining University, vol. 5, 2015, pp. 14-21.
    Search in Google ScholarBack to article
  7. [7] O. Onysko, L. Shkitsa, I. Taras. “Geometric analysis of manufacturability of conical locking thread” in Proc. Progressive Technologies in Engineering RTME-2019, 2019, pp. 216-218.
    Search in Google ScholarBack to article
  8. [8] O. Onysko, V. Panchuk, V. Vryukalo. “Threaded cutters with straight-cut cutting edge adjusted by value of front angle” in Proc. Progressive Technologies and Systems of Mechanical Engineering, 2014, pp. 10-14.
    Search in Google ScholarBack to article
  9. [9] O. Onysko, L. Boruschak, V. Kopey. “Ensuring the precision of manufacturing casing thread by applying parametric design of the profile of the cutting section of threaded tools in the environment of the Delphi programming system”. Scientific Bulletin of the National Technical University of Oil and Gas, vol. 2 (20), 2009, pp. 50-53.
    Search in Google ScholarBack to article
  10. [10] O. Onysko. “Methods of ensuring the accuracy of production of threaded ends of pipes of oil and gas assortment”. Exploration and Development of Oil and Gas Fields, vol. 3 (52), 2014, pp. 107-115.
    Search in Google ScholarBack to article
  11. [11] R. Rachkevich. “Stress-deformed state of the compressed drill string in the horizontal wellbore”. Exploration and Development of Oil and Gas Fields, vol. 3 (44), 2012, pp. 70-77.
    Search in Google ScholarBack to article
  12. [12] S. Savula, V. Kolodiy, E. Kharchenko. “Estimation of the influence of oscillations of the tubing column on the conditions of operation of the joints”. Scientific Bulletin of the National Technical University of Oil and Gas, vol. № 2 (8), 2004, pp. 116-125.
    Search in Google ScholarBack to article
  13. [13] L. Trischmon. “Methods for the Improvement of Drillcoller Jihst Eveluated bu Full size Fatigues tests”. Drilling and Production Practice, vol. 5, 1972, p. 175.
    Search in Google ScholarBack to article
  14. [14] V. Vasylyshyn. “The effect of screwing torque on the fatigue resistance of locking threaded connections of drill pipes”. Exploration and Development of Oil and Gas Fields, vol. №4 (37), 2010, pp. 55-58.
    Search in Google ScholarBack to article
  15. [15] V. Vasylyshyn. “Analysis of force factors in the elements of the threaded connection under counter-load method”. Exploration and Development of Oil and Gas Fields, vol. №2 (27), 2008, pp. 62-66
    Search in Google ScholarBack to article
  16. [16] V. Vasylyshyn. “Graphoanalytic modeling of surfaces of threaded unloading grooves of threaded joints of pipes of oil assortment”. Oil and gas industry, vol. 36, 1999, pp. 167-173.
    Search in Google ScholarBack to article
  17. [17] V. Vasylyshyn. “Analysis of force factors in the elements of a threaded connection under one-way loading method”. Exploration and Development of Oil and Gas Fields, vol. №1 (34), 2010, pp. 106-108.
    Search in Google ScholarBack to article
  18. [18] V. Vasylyshyn, I. Paliychuk, P. Shcheglyuk, S. Roketsky. “Analysis of problems and ways to increase the reliability and tightness of clutch joints casing”. Exploration and Development of Oil and Gas Fields, vol. №1 (42), 2012, pp. 169-176.
    Search in Google ScholarBack to article
  19. [19] V. Vasylyshyn. “An algorithm for calculating the areas of annular sections of surfaces of threaded unloading grooves”. Scientific Bulletin of the National Technical University of Oil and Gas, vol. №2 (24), 2010 pp. 77-80.
    Search in Google ScholarBack to article
  20. [20] V. Vasylyshyn. “Analysis of the Impact of the Threaded Unloading Groove on the Fatigue Resistance of Castle Thread Joints” in Proc. Innovative Potential of Ukrainian Science – XXI Century, 2010, pp. 67-70.
    Search in Google ScholarBack to article
  21. [21] V. Vasylyshyn. “Analysis of the Impact of Screwing Torque on the Fatigue Resistance of Threaded Joints of Oil and Gas Equipment” in Proc. Research Development 2010, 2010, pp. 16-20.
    Search in Google ScholarBack to article
  22. [22] V. Vasylyshyn. “Theoretical substantiation of the surface shapes of threaded unloading grooves of threaded pipe joints” in Proc. Oil and Gas of Ukraine 2000, 2000, pp. 297-299.
    Search in Google ScholarBack to article
  23. [23] V. Vasylyshyn. “Ways to improve the reliability and tightness of clutch joints of casing” in Proc. Space and Time of Modern Science, 2013, pp. 37-39.
    Search in Google ScholarBack to article
  24. [24] H. Wiegand. “Die Dauerhaltbarkcit von Gewindever bindungen mit ISO”. Profil in Abhangigkeit von der Einschraubtiefe, vol. 16, 1964, pp. 3-16.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2020-0015 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 97 - 103
Submitted on: Jan 1, 2020
Accepted on: Mar 1, 2020
Published on: May 26, 2020
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
tubing,
stress-strain state,
fatigue life,
tightening torque
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2020 Vitalii Vasylyshyn, Iryna Taras, Iryna Bekish, Olena Kornuta, Volodymyr Kornuta, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 28 (2020): Issue 2 (June 2020)Next article