Skip to main content
Have a personal or library account? Click to login
Analysis of the effect of curing and mixing periods on mechanical properties of the geopolymer composite Cover

Analysis of the effect of curing and mixing periods on mechanical properties of the geopolymer composite

Open Access
|Dec 2024

References

  1. Davidovits, J., 30 years of successes and failures in geopolymer applications. market trends and potential breakthroughs, Geopolymer 2002 Conference, October 28-29, 2002, Melbourne, Australia, 2002, p. 1–16
  2. Davidovits, J., Geopolymers and geopolymeric materials, J. Therm. Anal., 1989, 35: 429–441
  3. Davidovits, J. Geopolymer chemistry and applications, 5th edn. Institut Geopolymere, France, 2020
  4. Davidovits, J. Geopolymer chemistry & applications, Institut Geopolymere, France, 2015
  5. Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K.S., Singh, M., Environmental impact assessment of fly ash and silica fume based geopolymer concrete, J. Clean. Prod., 2020, 254: 120147. 10.1016/j.jclepro.2020.120147
  6. Dener, M., Altunhan, U., Benli, A., A green binder for cold weather applications: enhancing mechanical performance of alkali-activated slag through modulus, alkali dosage, and Portland cement substitution, Arch. Civ. Mech. Eng., 2024, 24(3): 1–12. 10.1007/s43452-024-00991-w
  7. Dener, M., Karatas, M., Mohabbi, M., High temperature resistance of self compacting alkali activated slag/portland cement composite using lightweight aggregate, Constr. Build. Mater., 2021, 290: 123250. 10.1016/j.conbuildmat.2021.123250
  8. Vieira Ramos, F.J.H.T., Reis, R.H.M., Grafova, I., Grafov, A., Monteiro, S.N., Eco-friendly recycled polypropylene matrix composites incorporated with geopolymer concrete waste particles, J. Mater. Res. Technol., 2020, 9(3): 3084–3090. 10.1016/j.jmrt.2020.01.054
  9. Nuaklong, P., Sata, V., Chindaprasirt, P., Properties of metakaolin-high calcium fly ash geopolymer concrete containing recycled aggregate from crushed concrete specimens, Constr. Build. Mater., 2018, 161: 365–373. 10.1016/j.conbuildmat.2017.11.152
  10. Hassan, A., Arif, M., Shariq, M., Use of geopolymer concrete for a cleaner and sustainable environment – A review of mechanical properties and microstructure, J. Clean. Prod., 2019, 223: 704–728. 10.1016/j.jclepro.2019.03.051
  11. Yip, C.K., Lukey, G.C., Provis, J.L., van Deventer, J.S.J., Van Deventer, J.S.J., Effect of calcium silicate sources on geopolymerisation, Cem. Concr. Res., 2008, 38: 554–564. 10.1016/j.cemconres.2007.11.001
  12. Dener, M., Mechanical and durability properties of alkali-activated slag/waste basalt powder mixtures, Proc. Inst. Mech. Eng., Part. L J. Mat. Des. Appl., Aug 2023, 237(10): 2250–2265. 10.1177/14644207231193615
  13. Hutagi, A., Khadiranaikar, R.B., Ahmad, A., Behavior of geopolymer concrete under cyclic loading, Constr. Build. Mater., 2020, 246: 118430. 10.1016/j.conbuildmat.2020.118430
  14. Jayanthi, N., Ghosh, T., Meena, R.K., Verma, M., Length and width of low-light, concrete hairline crack detection.pdf, Asian J. Civ. Eng., 2024, 25(3): 2705–2714. 10.1007/s42107-023-00939-0
  15. Erdogan, S.T., Properties of ground perlite geopolymer mortars, J. Mater. Civ. Eng., 2015, 10: 04014210. 10.1061/(ASCE)MT.1943-5533.0001172
  16. Verma, M., Nigam, M., Effect of FRP on the strength of geopolymer concrete, AIP Conf. Proc., 2023, 2721(1): 020030. 10.1063/5.0154114
  17. Vickers, L., Van Riessen, A., Rickard, W.D.A. Fire-resistant geopolymers role of fibres and fillers to enhance thermal properties, Singapore Heidelberg New York Dordrecht London: Springer; 2015. 10.1007/978-981-287-311-8
  18. Zhang, B., Mackenzie, Æ.K.J.D., Brown, I.W.M.M., MacKenzie, K.J.D., Brown, I.W.M.M., Crystalline phase formation in metakaolinite geopolymers activated with NaOH and sodium silicate, J. Mater. Sci., 2009, 44: 4668–4676. 10.1007/s10853-009-3715-1
  19. Nguyen, K.T., Nguyen, Q.D., Le, T.A., Shin, J., Lee, K., Analyzing the compressive strength of green fly ash based geopolymer concrete using experiment and machine learning approaches, Constr. Build. Mater., 2020, 247: 118581. 10.1016/j.conbuildmat.2020.118581
  20. Pacheco-Torgal, F., Abdollahnejad, Z., Miraldo, S., Baklouti, S., Ding, Y., An overview on the potential of geopolymers for concrete infrastructure rehabilitation, Constr. Build. Mater., 2012, 36: 1053–1058. 10.1016/j.conbuildmat.2012.07.003
  21. Cao, V.D., Bui, T.Q., Kjøniksen, A.L., Thermal analysis of multi-layer walls containing geopolymer concrete and phase change materials for building applications, Energy, 2019, 186: 115792. 10.1016/j.energy.2019.07.122
  22. Pan, Z., Sanjayan, J.G., Stress–strain behaviour and abrupt loss of stiffness of geopolymer at elevated temperatures, Cem. Concr. Compos., 2010, 32(9): 657–664. 10.1016/j.cemconcomp.2010.07.010
  23. Cao, V.D, Pilehvar S., Salas-Bringas C., Szczotok A.M., Rodriguez J.F., Carmona M., et al., Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications, Energy Convers. Manag., 2017, 133: 56–66. 10.1016/j.enconman.2016.11.061
  24. Dhawan, A., Verma, M., Goel, R., Effect of an inorganic compound on geopolymer concrete and ordinary portland cement concrete, Libr. Prog. Int., 2024, 44(3): 8368–8383
  25. Dhawan, A., Verma, M., Goel, R., Evaluating economic indexing between various kinds of geopolymer concrete to ordinary cement concrete, Libr. Prog. Int., 2024, 44(3): 4939–4955
  26. Foster, S.J., Amin, A., The behaviour of steel-fibre- reinforced geopolymer concrete beams in shear, Mag. Concr. Res., 2013, 65: 5
  27. Rangan, B.V., Geopolymer concrete for environmental protection, Indian Concr. J., 2014, 88: 41–59
  28. Sing Ng, T., Wales, S., Ali Amin, A., Stephen Foster, A.J., The behaviour of steel-fibre-reinforced geopolymer concrete beams in shear, Mag. Concr. Res., 2013, 65(5): 308–318. 10.1680/macr.12.00081
  29. Jeyasehar, C.A., Salahuddin, M. Development of fly ash based geopolymer concrete precast elements, Annamalai University, 2013, p. 1–77
  30. Singh, B., Ishwarya, G., Gupta, M., Bhattacharyya, S.K., Geopolymer concrete: A review of some recent developments, Constr. Build. Mater., 2015, 85: 78–90. 10.1016/j.conbuildmat.2015.03.036
  31. Nigam, M., Verma, M., Effect of nano-silica on the fresh and mechanical properties of conventional concrete, Forces Mech., 2023, 10(22): 100165. 10.1016/j.finmec.2022.100165
  32. Nigam, M., Verma, M., Prediction of compressive strength of nano-silica concrete by using random forest algorithm, Asian J. Civ. Eng., 2024, 25: 5205-5213. 10.1007/s42107-024-01107-8
  33. Van Jaarsveld, J.G.S., Van Deventer, J.S.J., Lukey, G.C., The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers, Chem. Eng. J., 2002, 89: 63–73
  34. Nagajothi, S., Elavenil, S., Influence of aluminosilicate for the prediction of mechanical properties of geopolymer concrete – artificial neural network, Silicon, 2020, 12(5): 1011–1021. 10.1007/s12633-019-00203-8
  35. Wongsa, A., Kunthawatwong, R., Naenudon, S., Sata, V., Chindaprasirt, P., Natural fiber reinforced high calcium fly ash geopolymer mortar, Constr. Build. Mater., 2020, 241: 118143. 10.1016/j.conbuildmat.2020.118143
  36. Xu, F., Deng, X., Peng, C., Zhu, J., Chen, J., Mix design and flexural toughness of PVA fiber reinforced fly ash-geopolymer composites, Constr. Build. Mater., 2017, 150: 179–189. 10.1016/j.conbuildmat.2017.05.172
  37. Biondi, L., Vlachakis, C., Hamilton, A., Ambient cured fly ash geopolymer coatings for concrete, Materials, 2019, 12: 1–24. 10.3390/ma12060923
  38. Arunkumar, K., Muthukannan, M., Suresh, A., Chithambar Ganesh, A., Mitigation of waste rubber tire and waste wood ash by the production of rubberized low calcium waste wood ash based geopolymer concrete and influence of waste rubber fibre in setting properties and mechanical behavior, Environ. Res., 2021, 194: 110661. 10.1016/j.envres.2020.110661
  39. Jithendra, C., Elavenil, S., Influences of parameters on slump flow and compressive strength properties of aluminosilicate based flowable geopolymer concrete using taguchi method, Silicon, 2020, 12(3): 595–602. 10.1007/s12633-019-00166-w
  40. Gupta, A., Gupta, N., Saxena, K.K., Mechanical and durability characteristics assessment of geopolymer composite (GPC) at varying silica fume content, J. Compos. Sci., 2021, 5(9): 237. 10.3390/JCS5090237
  41. Shehata, N., Mohamed, O.A., Sayed, E.T., Abdelkareem, M.A., Olabi, A.G., Geopolymer concrete as green building materials: Recent applications, sustainable development and circular economy potentials, Sci. Total. Environ., 2022, 836: 155577. 10.1016/j.scitotenv.2022.155577
  42. Suriya Prakash, A., Kumar, S.G., Suriya, A., Senthil, G., Fly, A., Experimental study on geopolymer concrete using steel fibres, Int. J. Eng. Trends Technol., 2015, 21(8): 396–399
  43. Bhattacharjee, R., Laskar, A.I., Rheological behavior of fly ash based geopolymer concrete, 35th Conference on our world in concrete & structures, Singapore, 2010, p. 1–7
  44. Kantarci, F., Ekinci, E., Effect of naoh concentrations and curing temperatures on mechanical properties of geopolymer pastes produced from fly ash and elazığ ferrochrome slag, Int. J. Mech. Prod. Eng., 2018, 5(12): 97–99
  45. Venkatesan, R.P., Pazhani, K.C., Strength and durability properties of geopolymer concrete made with ground granulated blast furnace slag and black rice husk ash, KSCE J. Civ. Eng., 2016, 20: 2384–2391. 10.1007/s12205-015-0564-0
  46. Wiyono, D., Hardjito, D., Antoni, P., Hardjito, D., Improving the durability of pozzolan concrete using alkaline solution and geopolymer coating, Procedia Eng., 2015, 125: 747–753. 10.1016/j.proeng.2015.11.121
  47. Ba, Z., Bradi, V., Mechanical and microstructural properties of alkali-activated fly ash geopolymers, J. Hazard. Mater., 2010, 181: 35–42. 10.1016/j.jhazmat.2010.04.064
  48. Wang, Y., Zheng, T., Zheng, X., Liu, Y., Darkwa, J., Zhou, G., Thermo-mechanical and moisture absorption properties of fly ash-based lightweight geopolymer concrete reinforced by polypropylene fibers, Constr. Build. Mater., 2020, 251: 118960. 10.1016/j.conbuildmat.2020.118960
  49. Zhuang, X.Y, Chen L., Komarneni S., Zhou C.H., Tong D.S., Yang H.M., et al., Fly ash-based geopolymer: Clean production, properties and applications, J. Clean. Prod., 2016, 125: 253–267. 10.1016/j.jclepro.2016.03.019
  50. Upreti, K., Verma, M., Prediction of compressive strength of high-volume fly ash concrete using artificial neural network, J. Eng. Res. App., 2022, 1(2): 24–32. 10.55953/JERA.2022.2104
  51. Upreti, K, Verma M., Agrawal M., Garg J., Kaushik R., Agrawal C., et al., Prediction of mechanical strength by using an artificial neural network and random forest algorithm, J. Nanomater., 2022, 2022: 1–12. 10.1155/2022/7791582
  52. Kumar, N., Raut, R.D., Upreti, K., Alam, M.S., Shafiuddin, M., Verma, M., Environmental concern in TPB model for sustainable IT adoption, International Conference on Information Systems and Intelligent Applications, Lecture Notes in Networks and Systems, Vol. 550, 2023, p. 59–70. 10.1007/978-3-031-16865-9_5
  53. Kumar, R., Verma, M., Dev, N., Lamba, N., Influence of chloride and sulfate solution on the long‐term durability of modified rubberized concrete, J. Appl. Polym. Sci., 2022, 139: 1–15. 10.1002/app.52880
  54. Kumar, R., Verma, M., Dev, N., Analysis of PCE-based superplasticiser for the different types of cement using marsh cone test, Evergreen, 2024, 11(2): 665–672. 10.5109/7183337
  55. Kumar, R., Verma, M., Dev, N., Investigation on the effect of seawater condition, sulphate attack, acid attack, freeze–thaw condition, and wetting–drying on the geopolymer concrete, Iran. J. Sci. Technol. Trans. Civ. Eng.Trans. Civ. Eng., 2022, 46(4): 2823–2853. 10.1007/s40996-021-00767-9
  56. Sharma, U., Gupta, N., Verma, M., Prediction of compressive strength of geopolymer concrete using artificial neural network, Asian J. Civ. Eng., 2023, 24(8): 2837–2850. 10.1007/s42107-023-00678-2
  57. Sharma, U., Gupta, N., Bahrami, A., Özkılıç, Y.O., Verma, M., Behavior of fibers in geopolymer concrete: A comprehensive review, Buildings, 2024, 14(136): 1–28. 10.3390/buildings14010136
  58. Sharma, U., Gupta, N., Verma, M., Prediction of compressive strength of GGBFS and flyash-based geopolymer composite by linear regression, lasso regression, and ridge regression, Asian J. Civ. Eng., 2023, 24(8): 3399–3411. 10.1007/s42107-023-00721-2
  59. Chouksey, A., Verma, M., Dev, N., Rahman, I., Upreti, K., An investigation on the effect of curing conditions on the mechanical and microstructural properties of the geopolymer concrete, Mater. Res. Express, 2022, 9(5): 55003. 10.1088/2053-1591/ac6be0
  60. Saranya, P., Nagarajan, P., Shashikala, A.P., Behaviour of GGBS-dolomite geopolymer concrete beam-column joints under monotonic loading, Structures, 2020, 25: 47–55. 10.1016/j.istruc.2020.02.021
DOI: https://doi.org/10.2478/msp-2024-0050 | Journal eISSN: 2083-134X (formerly 2083-124X) | Journal ISSN: 2083-1331
Language: English
Page range: 131 - 147
Submitted on: May 16, 2024
Accepted on: Jan 9, 2025
Published on: Dec 31, 2024
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services

© 2024 Manvendra Verma, Rahul Kumar Meena, Mohammad Iqbal Khan, Jamal M. Khatib, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.