Impact of firing temperature on insulating properties of Low Temperature Co-fired Ceramics

Arkadiusz P. Dabrowski

doi:10.2478/msp-2020-0012

.blurhash-client-img { display: none !important; }

Impact of firing temperature on insulating properties of Low Temperature Co-fired Ceramics

Materials Science-Poland

Volume 38 (2020): Issue 1 (March 2020)

By: Arkadiusz P. Dabrowski

Open Access

|May 2020

Abstract

In this paper, results of investigation on the impact of firing temperature on insulating properties of Low Temperature Cofired Ceramics are presented. Dissipation factor, volume resistivity and breakdown electric field intensity were determined for firing peak temperature in the range from 800 °C to 900 °C. The tests were performed for two commercial LTCC materials: 951 Green Tape (DuPont, USA) and SK47 (Keko, Slovenia). The results showed that the firing temperature had a significant effect on the dielectric loss factor, volume resistivity and lifetime at applied high voltage. No clear tendency was observed for dielectric strength in the analyzed firing temperature range.

References

[1] Dziedzic A., Nowak D., Radioengineering, 22 (2013), 218.
Search in Google Scholar Back to article
[2] Ur-Rehman M., Adekanye M., Tariq Chattha H., Nano Commun. Netw., 18 (2018), 72.10.1016/j.nancom.2018.03.003
Search in Google Scholar Back to article
[3] Jantunen H., Kangasvieri T., Vähäkangas J., Leppävuori S., J. Eur. Ceram. Soc., 23[14] (2003), 2541.10.1016/S0955-2219(03)00155-9
Search in Google Scholar Back to article
[4] Nowak D., Dziedzic A., Microelectron. Reliab., 51[7] (2011), 1241.10.1016/j.microrel.2011.02.018
Search in Google Scholar Back to article
[5] Jiang B., Muralt P., Maeder T., Sensor. Actuat. BChem., 221 (2015), 823.10.1016/j.snb.2015.06.127
Search in Google Scholar Back to article
[6] Belavic D., Hrovat M., Dolanc G., Santo Zarnik M., Holc J., Makarovic K., Radioengineering, 21[1] (2012), 195.10.4071/CICMT-2012-WA14
Search in Google Scholar Back to article
[7] Ma M., Khan H., Shan W., Wang Y., Ou J. Z., Liu Z., Kalantar-Zadeh K., Li Y., Sensor. Actuat. B-Chem., 239 (2017), 711.10.1016/j.snb.2016.08.073
Search in Google Scholar Back to article
[8] Lin L., Ma M., Zhang F., Liu F., Liu Z., Li Y., Ceram. Int., 44[1] (2018), S129.10.1016/j.ceramint.2018.08.159
Search in Google Scholar Back to article
[9] Manjakkal L., Synkiewicz B., Zaraska K., Cvejin K., Kulawik J., Szwagierczak D., Sensor. Actuat. B-Chem., 223 (2016), 641.10.1016/j.snb.2015.09.135
Search in Google Scholar Back to article
[10] Radauscher E.J., Parker C.B., Gilchrist K.H., Di Dona S., Russell Z.E., Hall S.D., Carlson J.B., Grego S., Edwards S.J., Sperline R.P., Denton M., Stoner B.R., Glass J.T., Amsden J.J., Int. J.Mass Spectrom., 422 (2017), 162.10.1016/j.ijms.2016.10.021
Search in Google Scholar Back to article
[11] Dorczynski M., Fabinska W., Roguszczak H., Golonka L., Proc. Device Packaging HiTEC HiTEN & CICMT, (2016), p. 47.
Search in Google Scholar Back to article
[12] Da˛browski A., Rydygier P., Czok M., Golonka L., Microelectron. Int., 35 (2018), 146.10.1108/MI-12-2017-0070
Search in Google Scholar Back to article
[13] Imanaka Y., Multilayered Low Temperature Cofired Ceramics (LTCC) Technology, Springer US, 2005.
Search in Google Scholar Back to article
[14] Makarovic K., Meden A., Hrovat M., Holc J., Bencan A. Dakskobler A., Kosec M., J. Am. Ceram. Soc., 95[2], (2012), 760.10.1111/j.1551-2916.2011.05027.x
Search in Google Scholar Back to article
[15] Alias R., The Effects of Sintering Temperature Variations on Microstructure Changes of LTCC Substrate, in: Lakshmanan A. (Ed.), Sintering of ceramics – new emerging techniques, InTech, London, 2012, p. 59.10.5772/32873
Search in Google Scholar Back to article
[16] Walker J. Maloney J., Gleason C., Holthus J., Smith B., Henry J., Graddy E., Sridharan S., Sakoske G., Proc. Device Packaging HiTEC HiTEN & CICMT, (2016), p. 136.
Search in Google Scholar Back to article
[17] Heux A., Antou G., Pradeilles N., Delhote N., Karnfelt C., Gallee F., Maitre A., Ceram. Int., 44[18] (2018), 22609.10.1016/j.ceramint.2018.09.035
Search in Google Scholar Back to article
[18] Makarovic K., Bencan A., Hrovat M., Holc J., Mali B, Kosec M., Bermejo R., Kraleva I., Int. J. Appl. Ceram. Technol., 10 [3] (2013), p. 449.
Search in Google Scholar Back to article
[19] Barteczka B., Slobodzian P., Dabrowski A., Golonka L., Microelectron. Int., 31[3] (2014), 169.10.1108/MI-11-2013-0067
Search in Google Scholar Back to article
[20] Nair D., Nair K. M., Souders K., Smith M., McCombs M., Parisi J., Mobley T., Thrasher B., (2010), Proc. International Symposium on Microelectronics: FALL 2010, Vol. 2010, No. 1, p. 242.
Search in Google Scholar Back to article
[21] Kawaguchi S., Namiki K.C., Ohshio S., Nishino J., Saitoha H., Adv. Mater., 11-12 (2006), p.693.
Search in Google Scholar Back to article
[22] Tsu R., McPherson J.W., McKee W.R., Proc. IRPS, (2000), p. 348.
Search in Google Scholar Back to article
[23] Noguchi J., IEEE Electron Dev., 52[8] (2005), p. 1743.
Search in Google Scholar Back to article
[24] Watson J., Castro G., J. Mater. Sci. Mater. Electron., 26 (2015), p. 9226.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/msp-2020-0012 | Journal eISSN: 2083-134X | Journal ISSN: 2083-1331

Journal RSS Feed

Language: English

Page range: 189 - 196

Submitted on: Jan 8, 2019

Accepted on: Jul 15, 2019

Published on: May 8, 2020

Published by: Wroclaw University of Science and Technology

In partnership with: Paradigm Publishing Services

Keywords:

LTCC,

Related subjects:

Materials sciences, other,

Nanomaterials,

Functional and smart materials,

Materials characterization and properties

© 2020 Arkadiusz P. Dabrowski, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 38 (2020): Issue 1 (March 2020)