References
- Elkarmoty M., Colla C., Gabrielli E., Bonduà S., Bruno R., 2017 A Combination of GPR Survey and Laboratory Rock Tests for Evaluating an Ornamental Stone Deposit in a Quarry Bench. Procedia Engineering, 191, 999–1007. https://doi.org/10.1016/j.proeng.2017.05.272
- Mosch S., Nikolayew D., Ewiak O., Siegesmund S., 2011 Optimized extraction of dimension stone blocks. Environmental Earth Sciences, 63(7), 1911–1924. https://doi.org/10.1007/s12665-010-0825-7
- Şirin E., Bonduà S., Elkarmoty M., 2021 Environmental and economic optimization for block cutting of dimension stones in a limestone quarry. Resources Policy, 74(September), 102396. https://doi.org/10.1016/j.resourpol.2021.102396
- Elkarmoty M., Colla C., Gabrielli E., Kasmaeeyazdi S., Tinti F., Bonduà S., Bruno R., 2017 Mapping and modelling fractures using ground penetrating radar for ornamental stone assessment and recovery optimization: Two case studies. Rudarsko Geolosko Naftni Zbornik, 32(4), 63–76, https://doi.org/10.17794/rgn.2017.4.7
- American Society for Testing and Materials, 2008 Annual book of ASTM standards, 2008. Section 4, Construction
- Jalalian M.H., Bagherpour R., Khoshouei M., 2021 Wastes production in dimension stones industry: resources, factors, and solutions to reduce them. Environmental Earth Sciences, 80(17), 1–13. https://doi.org/10.1007/s12665-021-09890-2
- Stone D., 2008 Standard Terminology Relating to iTeh Standards Document Preview. i(January), 19428. https://doi.org/10.1520/C0119-08.dressed
- Samarakoon K.G.A.U., Chaminda S.P., Jayawardena C.L., Dassanayake A.B.N., Kondage Y.S., Kannangara, K.A.T.T., 2023 A Review of Dimension Stone Extraction Methods. Mining, 3(3), 516–531. https://doi.org/10.3390/mining3030029
- Elkarmoty M., Bonduà S., Bruno R., 2020 A 3D optimization algorithm for sustainable cutting of slabs from ornamental stone blocks. Resources Policy, 65, 101533. https://doi.org/10.1016/j.resourpol.2019.101533
- Salmi E.F., Sellers E.J., 2021 A review of the methods to incorporate the geological and geotechnical characteristics of rock masses in blastability assessments for selective blast design. Engineering Geology, 281(December 2020), 105970. https://doi.org/10.1016/j.enggeo.2020.105970
- Allington R., 2014 A Quarry Design Handbook
- Jalalian M.H., Bagherpour R., Khoshouei M., 2023 Environmentally sustainable mining in quarries to reduce waste production and loss of resources using the developed optimization algorithm. Scientific Reports, 13(1), 1–20. https://doi.org/10.1038/s41598-023-49633-w
- Montani C., 2021 Marble and Stones in the world Report - Rapporto marmo e pietre nel mondo
- Rockliff D., 1996 Low-grade quarry products, reclaimed aggregates and inert wastes — Their use in unbound mixtures for road pavements. Waste Management, 16(1–3), 83–85. https://doi.org/10.1016/S0956-053X(96)00029-3
- Careddu N., 2019 Dimension stones in the circular economy world. Resources Policy, 60, 243–245. https://doi.org/10.1016/J.RESOURPOL.2019.01.012
- AlZaghrini N., Srour F.J., Srour I., 2019 Using GIS and optimization to manage construction and demolition waste: The case of abandoned quarries in Lebanon. Waste Management, 95, 139–149. https://doi.org/10.1016/J.WASMAN.2019.06.011
- Bonduà S., Monteiro Klen A., Pilone M., Asimopolos L., Asimopolos N.S., 2024 A Set of Ground Penetrating Radar Measures from Quarries. Data, 9(3), 1–10. https://doi.org/10.3390/data9030042
- Izadi-Yazdanabadi M., Hojat A., Zanzi L., Karimi-Nasab S., Arosio D., 2022 Analytical Models and Laboratory Measurements to Explore the Potential of GPR for Quality Control of Marble Block Repair through Resin Injections. Applied Sciences (Switzerland), 12(3). https://doi.org/10.3390/app12030987
- Kolapo P., Ogunsola N.O., Munemo P., Alewi D., Komolafe K., Giwa-Bioku A., 2023 DFN: An Emerging Tool for Stochastic Modelling and Geomechanical Design. Eng, 4(1), 174–205. https://doi.org/10.3390/eng4010011
- Miyoshi T., Elmo D., Rogers S., 2018 Influence of data analysis when exploiting DFN model representation in the application of rock mass classification systems. Journal of Rock Mechanics and Geotechnical Engineering, 10(6), 1046–1062. https://doi.org/10.1016/j.jrmge.2018.08.003
- Ülker E., Turanboy A., 2009 Maximum volume cuboids for arbitrarily shaped in-situ rock blocks as determined by discontinuity analysis—A genetic algorithm approach. Computers & Geosciences, 35(7), 1470–1480. https://doi.org/10.1016/j.cageo.2008.08.017
- Bogdanowitsch M., Sousa L., Siegesmund S., 2022 Building stone quarries: resource evaluation by block modelling and unmanned aerial photogrammetric surveys. In Environmental Earth Sciences (Vol. 81, Issue 1). Springer Berlin Heidelberg. https://doi.org/10.1007/s12665-021-10031-y
- Jalalian M.H., Bagherpour R., Khoshouei M., 2024 Geological investigations and production planning by identification of the discontinuities and rock mass blocks in dimension stone quarries: a case study. Rudarsko Geolosko Naftni Zbornik, 39(2), 85–95. https://doi.org/10.17794/rgn.2024.2.7
- Koulibaly A.S., Shahbazi A., Saeidi A., Rouleau A., Quirion M., Chesnaux R., 2023 Advancements in rock block volume calculation by analytical method for geological engineering applications. Environmental Earth Sciences, 82(13), 1–17. https://doi.org/10.1007/s12665-023-11027-6
- Schneider-Löbens C., Siegesmund S., Stein K.J., Löbens S., 2022 Joint analysis as an important tool for an optimizing block extraction of natural stones. In Environmental Earth Sciences (Vol. 81, Issue 3). Springer Berlin Heidelberg. https://doi.org/10.1007/s12665-022-10177-3
- Yarahmadi R., Bagherpour R., Kakaie R., Mirzaie N.H., Yari M., 2014 Development of 2D computer program to determine geometry of rock mass blocks. International Journal of Mining Science and Technology, 24(2), 191–194. https://doi.org/10.1016/j.ijmst.2014.01.008
- Tomasic I., 1994 The influence of discontinuity fabric and other factors on optimum exploitation of dimension stone. Rudarsko-Geološko-Naftni Zbornik, 6, 101–105
- Yarahmadi R., Bagherpour R., Khademian A., Mirzaie H., Kakaie R., 2015 Developing a Matlab code for determine geometry of rock mass blocks and its application in mining and rock mechanic engineering. Journal of Mining and Metallurgy, 51A(1), 41–49. https://doi.org/10.5937/JMMA1501041Y
- Yarahmadi R., Bagherpour R., Taherian S.G., Sousa L.M.O., 2017 Discontinuity modelling and rock block geometry identification to optimize production in dimension stone quarries. In Engineering Geology. Elsevier B.V. https://doi.org/10.1016/j.enggeo.2017.11.006
- Elkarmoty M., Tinti F., Kasmaeeyazdi S., Giannino F., Bonduà S., Bruno R., 2018 Implementation of a fracture modeling strategy based on georadar survey in a large area of limestone quarry bench. Geosciences (Switzerland), 8(12). https://doi.org/10.3390/geosciences8120481
- Elmouttie M.K., Poropat G.V., 2012 A method to estimate in situ block size distribution. Rock Mechanics and Rock Engineering, 45(3), 401–407. https://doi.org/10.1007/s00603-011-0175-0
- Elmouttie M.K., Poropat G.V., 2014 Quasi-stochastic analysis of uncertainty for modelling structurally controlled failures. Rock Mechanics and Rock Engineering, 47(2), 519–534. https://doi.org/10.1007/s00603-013-0410-y