Damping of Suddenly Changing Loads by Drive Means of the Driving Mechanism of the Scraper Conveyor

Stanislav Iev. Bartashevskyi; Valery А. Borodai; Olha Yu. Nesterova

doi:10.2478/minrv-2024-0003

.blurhash-client-img { display: none !important; }

Damping of Suddenly Changing Loads by Drive Means of the Driving Mechanism of the Scraper Conveyor

Mining Revue

Volume 30 (2024): Issue 1 (March 2024)

By: Stanislav Iev. Bartashevskyi, Valery А. Borodai and Olha Yu. Nesterova

Open Access

|Mar 2024

Abstract

An electromechanical method is proposed to avoid peak dynamic loads in a steady state, the condition of smooth start and emergency stop, as well as correction of the scraper conveyor productivity depending on the load flow level of the blasting combine, which will increase the reliability and reduce the energy and metal consumption of the transport link of the mining complex.

References

Xing Zhang, Wei Li, Zhencai Zhu, Shanguo Yang, Fan Jiang, 2019 Fault Detection for the Scraper Chain Based on Vibration Analysis Using the Adaptive Optimal Kernel Time-Frequency Representation Hindawi Shock and Vibration, Article ID 6986240, 14 pages https://doi.org/10.1155/2019/6986240
Search in Google Scholar Back to article
Yanqing Hu, Qingliang Zeng, Shoubo Jiang, Pengfei Yu and Zhikuan Yang, 2018 Dynamic Analysis of Chain Drive System for Scraper Conveyor Based on Amesim IOP Conf. Series: Materials Science and Engineering452 042127 doi:10.1088/1757-899X/452/4/042127
Search in Google Scholar Back to article
Chunxue Xie, Zhixiang Liu, Miao Xie, 2023 Dynamic Response Analysis of Scraper Conveyor under the Condition of Chain Broken DOI https://doi.org/10.21595/jve.2023.23192
Search in Google Scholar Back to article
Shoubo Jiang, Shuan Huang, Qinghua Mao, Qingliang Zeng, Kuidong Gao, Jinwang Lv, 2022 Dynamic Properties of Chain Drive in a Scraper Conveyor under Various Working Conditions Machines 10, 579. https://doi.org/10.3390/machines10070579
Search in Google Scholar Back to article
Shoubo Jiang, Weijian Ren, Qinghua Mao, Qingliang Zeng, Pengfei Yu, Kuidong Gao, Liang Wang, 2021 Dynamic Analysis of the Scraper Conveyor under Abnormal Operating Conditions Based on the Vibration and Speed Characteristics Hindawi Shock and Vibration Volume 2021, Article ID 8887744, 17 pages https://doi.org/10.1155/2021/8887744
Search in Google Scholar Back to article
Jiang S.B.; Zeng Q.L.; Wang G.; Gao K.D.; Wang Q.Y.; Hidenori K., 2018 Contact Analysis Of Chain Drive In Scraper Conveyor Based On Dynamic Meshing Properties Int j simul model 17 1, 81-91 ISSN 1726-4529
Search in Google Scholar Back to article
Andrzej Norbert Wieczoreka, Łukasz Koniecznya, Grzegorz Wojnara, Rafał Wyrobab, Krzysztof Filipowicza, Mariusz Kuczaja, 2024 Reduction of Dynamic Loads in the Drive System of Mining Scraper Conveyors through the Use of an Innovative Highly Flexible Metal Coupling Eksploatacja i Niezawodnosc – Maintenance and Reliability 2024: 26(2) http://doi.org/10.17531/ein/181171
Search in Google Scholar Back to article
Vyatcheslav Loveykin, Olga Kostyna, 2011 Дослідження Динаміки Пуску Скребкового Конвеєра Зі Змінним Навантаженням У Процесі Пуску / MOTROL, 13B, 42–48с
Search in Google Scholar Back to article
Wojnar G, Burdzik R, Wieczorek A N, Konieczny Ł., 2021 Multidimensional Data Interpretation of Vibration Signals Registered in Different Locations for System Condition Monitoring of a Three-Stage Gear Transmission Operating under Difficult Conditions. Sensors; 21(23), 7808, https://doi.org/10.3390/s21237808.
Search in Google Scholar Back to article
Kuczaj M, Wieczorek A N, Konieczny Ł, Burdzik R, Wojnar G, Filipowicz K, Głuszek G., 2023 Research on Vibroactivity of Toothed Gears with Highly Flexible Metal Clutch under Variable Load Conditions. Sensors; 23(1), 287, https://doi.org/10.3390/s23010287.
Search in Google Scholar Back to article
Hao S.Q.; Wang S.B.; Malekian R.; Zhang B.Y.; Liu W.L.; Li Z.X., 2017 A Geometry Surveying Model and Instrument of a Scraper Conveyor in Unmanned Longwall Mining Faces, IEEE Access, Vol. 5, 4095-4103, doi:10.1109/ACCESS.2017.2681201
Search in Google Scholar Back to article
Ren W.J.; Wang, L.; Mao, Q.H.; Jiang, S.B.; Huang, S., 2020 Coupling Properties of Chain Drive System under Various and Eccentric Loads. Int. J. Simul. Model. 2020, 19, 643–654. [CrossRef]
Search in Google Scholar Back to article
Z.X. Liu, C.X. Xie, J. Mao, M. Xie, 2019 Analysis of Longitudinal and Torsional Pendulum Coupling Vibration of Scraper Conveyor Under Material Loading Condition, Zhendong Ceshi Yu Zhenduan Journal of Vibration, Vol. 39, No. 1, pp. 147–152, https://doi.org/10.16450/j.cnki.issn.1004-6801.2019.01.022
Search in Google Scholar Back to article
Juzek M., 2019 Analysis of the Impact of Non-Parallelism of Shafts’ Axes on the Contact Area of Cooperating Teeth and Gearbox’s Components Vibrations. Scientific Journal of Silesian University of Technology. Series Transport; 104: 37-45. https://doi.org/10.20858/sjsutst.2019.104.4
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/minrv-2024-0003 | Journal eISSN: 2247-8590 | Journal ISSN: 1220-2053

Journal RSS Feed

Language: English

Page range: 29 - 36

Published on: Mar 30, 2024

Published by: University of Petrosani

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

scraper conveyor,

chain transmission,

transmission of traction force by coupling,

adjustable AC drive,

adaptive communication,

original control method,

Related subjects:

Introductions and overviews,

Engineering, other,

Geosciences,

Geosciences, other

© 2024 Stanislav Iev. Bartashevskyi, Valery А. Borodai, Olha Yu. Nesterova, published by University of Petrosani
This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 License.

Volume 30 (2024): Issue 1 (March 2024)