References
- [1] Wu D., Xu K., Guo P., Lei G., Chengm K., Gong X. 2021 Ground Deformation Characteristics Induced by Mechanized Shield Twin-Tunneling along Curved Alignments in Advances in Civil Engineering, vol. 2021, Article ID 6640072, 17 pages, DOI: 10.1155/2021/6640072
- [2] Peck R.B. 1969 Deep Excavations and Tunneling in Soft Ground, State of the Art Report in Proceedings of the 7th Int. Conf. on Soil Mechanics and Found. Eng., Mexico City, State of the Art volume, pp. 225-290
- [3] Golser J., Mussger K. 1979 New Austrian Tunneling Method (NATM), Contractual Aspects, in Tunneling under Difficult Conditions, Proceedings of the International Tunnel Symposium, Tokyo, Pergamon Press, pp. 387–92
- [4] Brown E.T. 1981 Putting the NATM into Perspective. Tunnels & Tunneling International, 13(10):7–13
- [5] Aygar E.B. 2019 Evaluation of New Austrian Tunneling Method Applied to Bolu Tunnel’s Weak Rocks, in Journal of Rock Mechanics and Geotechnical Engineering, https://doi.org/10.1016/j.jrmge.2019.12.11
- [6] U.S. Army Corps of Engineers 1997 Engineering and Design Tunnels and Shafts in Rock (e-book), Chapter 5
- [7] Ulusay R. Ve, Sönmez H. 2007 Propriétés mécaniques des massifs rocheux: 2ème édition mise à jour – étendue, Publications de la Chambre des Ingénieurs en Géologie de TMMOB, No:60
- [8] Rasouli M. 2009 Engineering Geological Studies of the Diversion Tunnel, Focusing on Stabilization Analysis and Support Design, Iran, Engineering Geology, 108: 208–224
- [9] Ali W. 2014 Rock Mass Characterization for Diversion Tunnels at Diamer Basha Dam, Pakistan – A Design Perspective in International Journal of Scientific Engineering and Technology, 1292–1296
- [10] Genis M., Basarir H., Ozarslan A., Bilir E., Balaban E. 2007 Engineering Geological Appraisal of the Rock Masses and Preliminary Support Design, Dorukhan Tunnel, Zonguldak, Turkey.” Engineering Geology, 92: 14–26
- [11] Michael K. 2004 Monitoring Ground Deformation in Tunneling: Current practice in transportation tunnels. Engineering Geology 79(1):93-113. DOI: 10.1016/j.enggeo.2004.10.011
- [12] Bock H. 2001 European Practice in Geotechnical Instrumentation for Tunnel Construction Control. Tunnels and Tunneling International, 51 – 54
- [13] Strauss A., Bien J., Neuner H., et al. 2019 Sensing and Monitoring in Tunnels Testing and Monitoring Methods for the Assessment of Tunnels, Structural Concrete, 2020;21:1356–1376.https://doi.org/10.1002/suco.201900444
- [14] Sakurai S. 1983 Displacement Measurements Associated with the Design of Underground Openings, in Proc. Int. Symp. Field Measurements in Geomechanics, Zurich, 1983, 2, 1163–1178
- [15] Kontogianni V., Stathis S. 2005 Induced Deformation during Tunnel Excavation: Evidence from Geodetic Monitoring, Engineering Geology 79(1):115-126. DOI: 10.1016/j.enggeo.2004.10.012
- [16] Ulusoy R., Hudson J.A. 2007 The complete ISRM Suggested Methods for Rock Characterization Testing and Monitoring: 1974-2006
- [17] Lee C.J., Wu B.R., Chen H.T., Chiang K.H. 2006 Tunneling Stability and Arching Effects during Tunneling in Soft Clayey Soil, Tunneling and Underground Space Technology, 2006, 21(2):119-132, DOI: 10.1016/j.tust.2005.06.003
- [18] Burland J.B. 1995 Assessment of Risk of Damage to Buildings due to Tunneling and Excavation, Proc. 1st Int. Conf. on Earthquake Geot. Eng., IS-Tokyo, pp. 611 – 628
- [19] Zhao Y.M., Feng X.T., Jiang, Q. et al. 2021 Large Deformation Control of Deep Roadways in Fractured Hard Rock Based on Cracking-Restraint Method, Rock Mech Rock Eng., https://doi.org/10.1007/s00603-021-02384-4
- [20] Hamou Djellit 1987 Évolution tectono-métamorphique du socle Kabyle et polarité de mise en place des nappes de flysch en petite Kabylie occidentale (Algérie), Supported in 1987 at Paris 11 University, in partnership with the University of Paris-Sud. Faculty of Sciences of Orsay (Essonne)
- [21] Joleaud L., Ferrand M., Ficheur E. 1908 Algeria. S Carte géologique de l’Algérie 1:50,000. 74, El Aria. ervice de la carte géologique de l’Algérie
- [22] Hoek E., Kaiser P. K., Bawden W. F. 2000 Support of Underground Excavations in Hard Rock. CRC Press
- [23] Schubert W. 2004 Basics and Application of the Austrian Guideline for the Geomechanical Design of Underground Structures, in EUROCK 2004 & 53rd Geomechanics Colloquium
- [24] Evrim Sopac, Haluk Akgun 2008 Engineering Geological Investigations and the Preliminary Support Design for the Proposed Ordu Peripheral Highway Tunnel, Ordu, Turkey, Engineering Geology, 96: 43-61
- [25] Biniawski Z.T. 1989 Classification of Rock Masses for Engineering: The RMR System and Future Trends,” in Rock Testing and Site Characterization, Pergamon, Oxford, UK
- [26] Bortan, 2013 Using the Q-System, Sweden and Norway, Norwegian Geotechnical Institute, Oslo, Norway
- [27] Gomes M., Correia Nogueira T.A. 2015 Alternative models for the calculation of the RMR and Q indexes for granite rock masses, Academia.edu. (P. Cortez, Producer) Retrieved on March, from http://www.academia.edu/3114361/
- [28] El-Naqa, A. 2010 Application of RMR and Q Geomechanical Classification Systems along the Proposed Mujib Tunnel Route, Central Jordan, Bull Eng Geol Environ, 200, 60: 257. https://doi.org/10.1007/s100640100112
- [29] Choi S.Y., Park H.D. 2002 Comparison among Different Criteria of RMR and Q-system for Rock Mass Classification for Tunneling in Korea, Volume 17, Issue 4, pages 391-401, doi.org/10.1016/S0886-7798(02)00063-9