References
- von Schnering, H.G., & Nesper, R. (1991). Nodal Surfaces of Fourier Series: Fundamental Invariants of Structured Matter. Zeitschrift für Physik B – Condensed Matter., 83 (3), 407–412.
- Al-Ketan, O., Ali, M., Khalil, M., Rowshan, R., Khan, K. A., & Abu Al-Rub, R. K. (2021). Forced Convection Computational Fluid Dynamics Analysis of Architected and Three-Dimensional Printable Heat Sinks Based on Triply Periodic Minimal Surfaces. Journal of Thermal Science and Engineering Applications, 13, 1–14. DOI:10.1115/1.4047385
- Cheng, Z., Li, X., Xu, R., & Jiang, P. (2021). Investigations on Porous Media Customized by Triply Periodic Minimal Surface: Heat Transfer Correlations and Strength Performance. International Communications in Heat and Mass Transfer, 129, 11–12. DOI:10.1016/j. icheatmasstransfer.2021.105713
- Attarzadeh, R., Rovira, M., & Duwig, C. (2021). Design analysis of the “Schwartz D” Based Heat Exchanger: A Numerical Study. International Journal of Heat and Mass Transfer, 177, 6–7. DOI:10.1016/j. ijheatmasstransfer.2021.121415
- Al-Ketan, O., Pelanconi, M., Ortona, A., & Abu Al-Rub, R. K. (2019). Additive Manufacturing of Architected Catalytic Ceramic Substrates Based on Triply Periodic Minimal Surfaces. Journal of the American Ceramic Society, 102, 6176–6193. DOI:10.1111/jace.16474
- Femmer, T., Kuehne, A. J. C., & Wessling, M. (2015). Estimation of the Structure Dependent Performance of 3-D Rapid Prototyped Membranes. Chemical Engineering Journal, 273, 438–445. DOI:10.1016/j.cej.2015.03.029
- Li, W., Yu, G., & Yu, Z. (2020). Bioinspired Heat Exchangers Based on Triply Periodic Minimal Surfaces for Supercritical CO2 Cycles. Applied Thermal Engineering, 179, 9–10. DOI:10.1016/j.applthermaleng.2020.115686.
- Reynolds, B.W., Fee, C.J., Morison, K.R., & Holland, D.J. (2023). Characterisation of Heat Transfer within 3D Printed TPMS Heat Exchangers. International Journal of Heat and Mass Transfer, 212, 2–3.
- Flow Simulation. (2020). SolidWorks Flow Simulation 2020 Technical Reference. Available at: https://www.cati.com/wp-content/uploads/2021/04/swflow2021-technical-reference.pdf
- Rhodes, M. (2017). Introduction to Particle Technology (2nd ed.). Chichester, UK, John Wiley & Sons, Ltd. 30–42.