Technical and Economic Analysis of a Robotic Station for Assembling the FPV Drone Body
References
- Derkacz, A.J. & Dudziak, A. (2021). Savings and Investment Decisions in the Polish Energy Sector. Sustainability 13, 553. DOI:10.3390/su13020553.
- Małek, A., Karowiec, R. & Józwik, K. (2023). A review of technologies in the area of production, storage and use of hydrogen in the automotive industry. Archives of Automotive Engineering 102(4), 41–67. DOI:10.14669/AM/177038.
- Čechmánek, D., Kohár, R., Brumerčík, F., Lukáč, M. & Fiačan, J. (2023). Optimization of the Injection Mold Runner System of the Transport Means Plastic Parts. Communications - Scientific Letters of the University of Žilina 25(3), B176–B185. DOI: 10.26552/com.C.2023.046.
- Firlej, M., Bogucki, M., Gil, L., Firlej, M., Bogucki, M., Gil, L., Samociuk, W., Domagała, I., Bartnik, G., Pieniak, D., Krzysiak, Z. & Biedziak, B. (2021). Evaluation of indentation hardness, scratch resistance and sliding wear of resin materials. Przemysl Chemiczny 100(1), 67–72. DOI: 10.15199/62.2021.1.7.
- Bogucki, M., Samociuk, W., Stączek, P. & Krzysiak, Z. (2021). Polioptimization of an injection moulding process. Przemysl Chemiczny 100(3), 225–229. DOI: 10.15199/62.2021.3.2.
- Rudawska, A., Miturska, I., Szabelski, J., Skoczylas, A., Droździel, P., Bociąga, E., Madleňák, R. & Kasperek, D. (2017). Experimental research and statistic analysis of polymer composite adhesive joints strength. Journal of Physics: Conference Series, 842(1), 012074. DOI: 10.1088/1742-6596/842/1/012074.
- Szala, M., Szafran, M., Matijosius, J. & Drozd, K. (2023). Abrasive wear mechanisms of s235jr, s355j2, c45, aisi 304, and hardox 500 steels tested using garnet, corundum and carborundum abrasives. Advances in Science and Technology Research Journal 17(2), 147-160. DOI: 10.12913/22998624/161277.
- Voltr, O. & Peňáz, J. (2013). Carrying capacity of horizontal cylindrical shells on saddle supports. Periodica Polytechnica Transportation Engineering 41(2), 133–137. DOI: 10.3311/PPtr.7114.
- Dąbrowska, K., Nowak, R., Rumianek, P. & Seńko, J. (2022). Construction and Validation of Simulation Models of Samples Made from 316L Steel by Applying Additive Technique. Materials 15(18), 6244. DOI: 10.3390/ma15186244.
- Walczak, M., Świetlicki, A., Szala, M., Turek, M. & Chocyk, D. (2024). Shot Peening Effect on Sliding Wear in 0.9% NaCl of Additively Manufactured 17-4PH Steel. Materials 17(6), 1383. DOI: 10.3390/ma17061383.
- Faraj, R., Graczykowski, C., Hinc, K., Holnicki-Szulc, J., Knap, L. & Senko, J. (2017). Adaptable pneumatic shock-absorber. In 8th Conference on Smart Structures and Materials, SMART 2017 and 6th International Conference on Smart Materials and Nanotechnology in Engineering, SMN 2017, 2017-January, (pp. 86–93). Barcelona, Spain: International Center for Numerical Methods in Engineering (CIMNE).
- Jilek, P., Berg, J. & Tchuigwa, B.S.S. (2022). Influence of the Weld Joint Position on the Mechanical Stress Concentration in the Construction of the Alternative Skid Car System’s Skid Chassis. Applied Sciences 12(1), 397. DOI: 10.3390/app12010397.
- Pravilonis, T., Sokolovskij, E., Kilikevicius, A., Matijosius, J. & Kilikeviciene, K. (2020). The Usage of Alternative Materials to Optimize Bus Frame Structure. Symmetry 12(6), 1010. DOI: 10.3390/sym12061010.
- Jilek, P. & Cerman, J. (2020). Design of sliding frame system for two-wheeled vehicle. Transport Means - Proceedings of the 24th International Conference 2020, 30 September, (136–141). Kaunas, Lithuania, Kaunas University of Technology.
- Bistak, M., Medvecky, S., Gajdosova, E., Dzimko, M., Gramblicka, S., Kohar, R., Stopka, M., Steininger, J., Hrcek, S., Tropp, M. & Brumercik, F. (2017). Applications of modern technologies in the production of aircraft propeller prototype. Communications - Scientific Letters of the University of Žilina 19(2), 54–59. DOI: 10.26552/com.C.2017.2A.54-59.
- Czyż, Z., Suwała, S., Karpiński, P. & Skiba, K. (2021). Numerical analysis of the support platform for an unmanned aerial vehicle. Journal of Physics: Conference Series 2130(1), 012029, VI International Conference of Computational Methods in Engineering Science (CMES 2021) 25-27 November 2021, Zamość, Poland.
- Lukaszewicz, A., Szafran, K. & Jozwik, J. (2020). CAx techniques used in UAV design process. 2020 IEEE International Workshop on Metrology for AeroSpace, MetroAeroSpace 2020 - Proceedings, 95–98, 9160091. DOI: 10.1109/MetroAeroSpace48742.2020.9160091.
- Drozd, K. & Nieoczym, A. (2022). Modeling and Exploitation Load Tests of the Suspended Route Slings Caused by Passage of the Locomotive at Various Speed along Mining Excavation. Advances in Science and Technology Research Journal 16(1), 266–281. DOI: 10.12913/22998624/143284.
- Nieoczym, A. & Szklarek, K. (2018). Finite elements strength analysis of a compressor consisting of four helical rotors. Advances in Science and Technology Research Journal 12(1), 1–8. DOI: DOI: 10.12913/22998624/73822.
- Kilikevičius, A., Rimša, V. & Rucki, M. (2020). Investigation of influence of aircraft propeller modal parameters on small airplane performance. Eksploatacja i Niezawodność – Maintenance and Reliability 22(1), 1–5. DOI: 10.17531/ein.2020.1.1.
- Pytka, J., Józwik, J., Budzyński, P., Łyszczyk, T., Tofil, A., Gnapowski, E. & Laskowski, J. (2019). Wheel dynamometer system for aircraft landing gear testing. Measurement: Journal of the International Measurement Confederation 148, 106918. DOI: 10.1016/j.measurement.2019.106918.
- Lusiak, T., Novak, A., Bugaj, M. & Madlenak, R. (2020). Assessment of impact of aerodynamic loads on the stability and control of the gyrocopter model. Communications - Scientific Letters of the University of Žilina 22(4), 63–69. DOI: 10.26552/com.C.2020.4.63-69.
- Škrabala, J., Hajdučík, A., Medvecký, Š. & Brumerčík, F. (2019). Optimalisation of the blade movement of the mower. Scientific Journal of Silesian University of Technology. Series Transport 105, 213–222. DOI: 10.20858/sjsutst.2019.105.17.
- Czyz, Z. & Karpinski, P. (2020). Aerodynamic characteristics of the X-tail stabilizer in a hybrid unmanned aircraft. International Journal of Simulation Modelling 19(4), 631–642. DOI: 10.2507/IJSIMM19-4-534.
- Harničárová, M., Valíček, J. & Zajac, J. (2012). Techno-economical comparison of cutting material by laser, plasma and oxygen. Tehnicki Vjesnik 19(4), 813–817.
- Derkacz, A.J., Dudziak, A., Stopka, O. & Stopková, M. (2023). Profitability Determinants of Transport Service and Warehouse Enterprises A Case Study from Poland. Periodica Polytechnica Transportation Engineering 51(3), 275–286. DOI: 10.3311/PPtr.21402.
- International Federation of Robotics. (2023). Raport World Robotics 2023 International Federation of Robotics – IFR.
- Stopková, M., Kolařík, P., Jurkovič, M. & Sosedová, J.P. (2024). Proposal of Set of Optimization Criteria and Their Specific Calculation for Effective Inventory Management in an Industrial Enterprise. TEM Journal 13(2), 1290–1296. DOI: 10.18421/TEM132-43.
- Abdrakhmanov, N., Fedosov, A., Kilinbaeva, I., Ismagilov, M. & Savicheva, Y. (2022). Analysis of the relationship between the sustainable environmental health and occupational safety: problems, prospects and opportunities. IOP Conf. Ser.: Earth Environ. Sci. 981, 032046. DOI: 10.1088/1755-1315/981/3/032046.
- Schwabe, H. & Castellacci, F. (2020). Automation, workers’ skills and job satisfaction. PLoS ONE 15(11): e0242929. DOI: 10.1371/journal.pone.0242929.
- Coombs, C., Hislop, D., Taneva, S.K. & Barnard, S. (2020). The strategic impacts of Intelligent Automation for knowledge and service work: An interdisciplinary review. The Journal of Strategic Information Systems 29, 4, 101600. DOI: 10.1016/j.jsis.2020.101600.
- Thrun, S., Burgard, W. & Fox, D. (2005). Probabilistic Robotics. Cambridge, Massachusetts, London, England: MIT Press.
- Sheta, A.F., Ghatasheh, N., Faris, H. & Rodan, A. (2017). Robotics Evolution: from Remote Brain to Cloud. International Journal of Control and Automation 11(11), 29-42. DOI: 10.48550/arXiv.1901.03297.
DOI: https://doi.org/10.2478/logi-2025-0004 | Journal eISSN: 2336-3037
Language: English
Page range: 37 - 48
Submitted on: Oct 9, 2024
Accepted on: Oct 30, 2024
Published on: Jan 24, 2025
Published by: Institute of Technology and Business in České Budějovice
In partnership with: Paradigm Publishing Services
Publication frequency: 1 times per year
Keywords:
Related subjects:
© 2025 Marcin Górski, Valerii Prykhodzhenko, Tomasz Karamon, Jacek Caban, published by Institute of Technology and Business in České Budějovice
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.