References
- 1. Tan L. Preparation and characterization of Ca-P coating on AZ31 magnesium alloy. Transactions of Nonferrous Metals Society of China. 2010, 20, s 648-654.
- 2. Parida P. et al. Classification of Biomaterials used in Medicine. International Journal of Advances in Applied Sciences. 2012, 1(3), 125-129.
- 3. Esmaily M. et al. Fundamentals and advances in magnesium alloy corrosion. Progress in Materials Science. 2017, 89, 92-193.
- 4. León B., JANSEN J. Thin Calcium Phosphate Coatings for Medical Implants. New York, NY: Springer New York, 2009.
- 5. Chuprunov K. et al. The pH Level Influence on Hydroxyapatite Phase Composition Synthesized with Hydrothermal Method. IOP Conference Series: Materials Science and Engineering. 2020, 731(1).
- 6. Zhu Y. et al. Growth and characterization of Mg(OH)2 film on magnesium alloy AZ31. Applied Surface Science. 2011, 257(14), 6129-6137.
- 7. Doskocil L. et al. Characterization of Prepared Superhydrophobic Surfaces on AZ31 and AZ91 Alloys Etched with ZnCl2 and SnCl2. Coatings. 2022, 12(10).
- 8. Dziková J. et al. Characterization and Corrosion Properties of Fluoride Conversion Coating Prepared on AZ31 Magnesium Alloy. Coatings. 2021, 11(6).
- 9. Tomozawa M., Hiromoto S. Growth mechanism of hydroxyapatite-coatings formed on pure magnesium and corrosion behavior of the coated magnesium. Applied Surface Science. 2011, 257(19), 8253-8257.
- 10. Ali A. et al. Hydrothermal deposition of high strength calcium phosphate coatings on magnesium alloy for biomedical applications. Surface and Coatings Technology. 2019, 357, 716-727.
- 11. Jeong H., Yoo Y. Synthesis and characterization of thin films on magnesium alloy using a hydrothermal method. Surface and Coatings Technology. 2015, 284, 26-30.
- 12. Earl J. S. et al. Hydrothermal synthesis of hydroxyapatite. Journal of Physics: Conference Series. 2006, 26, 268-271.
- 13. Su Y. et al. Enhancing the corrosion resistance and surface bioactivity of a calcium-phosphate coating on a biodegradable AZ60 magnesium alloy via a simple fluorine post-treatment method. RSC Advances. 2015, 5(69), 56001-56010.
- 14. Sasikumar Y. et al. Fabrication of Brushite Coating on AZ91D and AZ31 Alloys by Two-Step Chemical Treatment and Its Surface Protection in Simulated Body Fluid. Journal of Materials Engineering and Performance. 2019, 28(6), 3803-3815.
- 15. Tang H. et al. Fabrication and Characterization of Mg(OH)2 Films on AZ31 Magnesium Alloy by Alkali Treatment. International Journal of Electrochemical Science. 2017, 1377-1388.
