Investigation on the microstructure, microhardness, and tribological behavior of AA1100-hBN surface composite

R. Premkumar; R. V. Vignesh; R. Padmanaban; M. Govindaraju; R. Santhi

doi:10.2478/kom-2021-0001

Abstract

Aluminum alloy AA1100 has less wear resistance and mechanical properties than that of other aluminum alloys. This research work is on the fabrication of surface composites of AA1100 alloy by friction stir processing (FSP). The surface composites are fabricated by reinforcing hBN (hexagonal Boron Nitride) in AA1100 alloy to improve the mechanical and tribological properties. The influence of process parameters, rotational speed (rpm), and transverse speed (mm/min) on the microstructural evolution and properties of the fabricated surface composites is investigated.

References

1. Mishra, R.S., Ma, Z.Y., Charit, I.: Friction stir processing: a novel technique for fabrication of surface composite. Mater. Sci. Eng. A 2003, 341, 307–310. http://dx.doi.org/10.1016/S0921-5093(02)00199-510.1016/S0921-5093(02)00199-5
Search in Google Scholar Back to article
2. Pantelis, D., Tissandier, A., Manolatos, P., Ponthiaux, P.: Formation of wear resistant Al–SiC surface composite by laser melt-particle injection process. Mater. Sci. Tech. 1995, 11, 299–303. http://dx.doi.org/10.1179/mst.1995.11.3.29910.1179/mst.1995.11.3.299
Search in Google Scholar Back to article
3. Ni, D.R., Wang, J.J., Zhou, Z.N., Ma, Z.Y.: Fabrication and mechanical properties of bulk NiTip/Al composites prepared by friction stir processing. J. Alloy Compd. 2014, 586, 368–374. http://dx.doi.org/10.1016/j.jallcom.2013.10.01310.1016/j.jallcom.2013.10.013
Search in Google Scholar Back to article
4. Dolatkhah, A., Golbabaei, P., Givi, M.K.B., Molaiekiya, F., 2012. Investigating effects of process parameters on Microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing. Mater. Design 2012, 37, 458–464. http://dx.doi.org/10.1016/j.matdes.2011.09.03510.1016/j.matdes.2011.09.035
Search in Google Scholar Back to article
5. Khayyamin, D., Mostafapour, A., Keshmiri, R.: The effect of pro-cess parameters on microstructural characteristics of AZ91/SiO2com-posite fabricated by FSP. Mater. Sci. Eng. A 2013, 559, 217–221. http://dx.doi.org/10.1016/j.msea.2012.08.08410.1016/j.msea.2012.08.084
Search in Google Scholar Back to article
6. Mishra, R.S., Ma, Z.Y. Friction stir welding and processing. Mater. Sci. Eng. 2005, R50, 1–78. http://dx.doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001
Search in Google Scholar Back to article
7. Zohoor, M., Besharati Givi, M.K., Salami, P.: Effects of processing parameters on fabrication of Al–Mg/Cu composites via friction stir processing. Mater. Design 2012, 39, 358–365, http://dx.doi.org/10.1016/j.matdes.2012.02.04210.1016/j.matdes.2012.02.042
Search in Google Scholar Back to article
8. Bauri, R., Yadav, D., Suhas, G. Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite. Mater. Sci. Eng. A 2011, 528, 4732–4739, http://dx.doi.org/10.1016/j.msea.2011.02.08510.1016/j.msea.2011.02.085
Search in Google Scholar Back to article
9. R. Vaira Vignesh, R. Padmanaban: Modelling tensile strength of friction stir welded Aluminium Alloy 1100 using Fuzzy logic. 11th International Conference on Intelligent Systems and Control (ISCO) 2017. https://www.sciencedirect.com/science/article/pii/S221478531831141610.1109/ISCO.2017.7856034
Search in Google Scholar Back to article
10. R. Vaira Vignesh and R. Padmanaban. Influence of friction stir processing parameters on the wear resistance of aluminium alloy AA5083. Materials Today: Proceedings 2018, 5, 7437–7446. https://www.sciencedirect.com/science/article/pii/S221478531732685810.1016/j.matpr.2017.11.415
Search in Google Scholar Back to article
11. Vaira Vignesh Ramalingam, Padmanaban Ramasamy and Madhav Datta. Microstructure, hardness and corrosion behaviour of friction-stir processed AA5083. Anti-Corrosion Methods and Materials 2019, 66 (6), 791-801. https://www.emerald.com/insight/content/doi/10.1108/ACMM-07-2017-1816/full/html10.1108/ACMM-07-2017-1816
Search in Google Scholar Back to article
12. R. Vaira Vignesh, R. Padmanaban, M. Govindaraju and G. Suganya Priyadharshini., 2019. Mechanical properties and corrosion behaviour of AZ91D-HAP surface composites fabricated by friction stir processing. Materials Research Express 2019, 6 (8), 085401. https://iopscience.iop.org/article/10.1088/2053-1591/ab1ded/meta10.1088/2053-1591/ab1ded
Search in Google Scholar Back to article
13. Romeo Sephyrin Fono-Tamo., Esther Titilayo Akinlabi., Jen Tien-Chien., Kazeem Oladele Sanusi. Microstructural Investigation Of GYP/Al Surface Composites Fabricated By Friction Stir Processing. IEEE 10th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT 2019), https://ieeexplore.ieee.org/document/871205210.1109/ICMIMT.2019.8712052
Search in Google Scholar Back to article
14. K.L. Tee, L. Lu, M.O. Lai. Wear performance of in-situ Al–TiB composite. Wear 2000, 240 (1-2), 59–64. https://www.sciencedirect.com/science/article/abs/pii/S004316480000337910.1016/S0043-1648(00)00337-9
Search in Google Scholar Back to article
15. Lifeng Zhang., Ramya Chandrasekar., Jane Y. Howe., Michael K. West., Nyle E. Hedin., William J. Arbegast., and Hao Fong: A Metal Matrix Composite Prepared from Electrospun TiO2 Nanofibers and an Al 1100 Alloy via Friction Stir Processing. Applied Materials and Interfaces 2009, 1 (5), 987–991. https://www.researchgate.net/publication/4280536010.1021/am900095x
Search in Google Scholar Back to article
16. Devinder Yadav., Ranjit Bauri: Effect of friction stir processing on microstructure and mechanical properties of aluminium. Materials Science and Engineering A 2012, 539, 85–92. https://www.researchgate.net/publication/25733692610.1016/j.msea.2012.01.055
Search in Google Scholar Back to article
17. H.S. Grewal., H.S. Arora, H. Singh., A. Agrawal: Surface modification of hydroturbine steel using friction stir processing. Applied Surface Science 2013, 268, 547–555. https://www.sciencedirect.com/science/article/abs/pii/S016943321300023810.1016/j.apsusc.2013.01.006
Search in Google Scholar Back to article
18. X.C. Liu., Y.F. Sun., Y. Morisada., H. Fujii: Dynamics of rotational flow in friction stir welding of aluminium alloys. Journal of Materials Processing Technology 2017, 252. https://www.researchgate.net/publication/32066711110.1016/j.jmatprotec.2017.10.033
Search in Google Scholar Back to article
19. S. Selvakumar, I., Dinaharan, R., Palanivel. B., Ganesh Babu: Characterization of molybdenum particles reinforced Al6082 aluminum matrix composites with improved ductility produced using friction stir processing. Materials Characterization 2017, 125, 13-22. https://www.sciencedirect.com/science/article/abs/pii/S10445803163 0694510.1016/j.matchar.2017.01.016
Search in Google Scholar Back to article
20. Morteza Shamanian., Hossein Mostaan., Mehdi Safari., Jerzy A. Szpunar: Friction stir modifications of GTA 7075-T6 Al alloy weld joints: EBSD study and microstructural evolutions. Archives of Civil and Mechanical Engineering 2017, 17, 574-585. https://www.sciencedirect.com/science/article/abs/pii/S164496651730011010.1016/j.acme.2017.01.002
Search in Google Scholar Back to article
21. Devinder Yadav, Ranjit Bauri: Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite. Materials Science and Engineering A 2011, 528, 1326–1333. https://www.sciencedirect.com/science/article/abs/pii/S092150931001200110.1016/j.msea.2010.10.035
Search in Google Scholar Back to article
22. Parviz Asadi, Ghader Faraji., Mohammad K. Besharati: Producing of AZ91/SiC composite by friction stir processing (FSP). Int. J. Adv. Manuf. Technol. 2010, 51, 247–260. https://www.researchgate.net/publication/22686801410.1007/s00170-010-2600-z
Search in Google Scholar Back to article
23. M. Azizieh., A.H. Kokabi., P. Abachi: Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing. Materials and Design 2011, 32, 2034–2041. https://www.sciencedirect.com/science/article/pii/S026130691000681310.1016/j.matdes.2010.11.055
Search in Google Scholar Back to article
24. V. Balasubramanian: Relationship between base metal properties and friction stir welding process parameters. Materials Science and Engineering A 2008, 480, 397–403. https://www.sciencedirect.com/science/article/pii/S026130691000194910.1016/j.msea.2007.07.048
Search in Google Scholar Back to article
25. Mohsen Barmouz., Mohammad Kazem Besharati Givi., Javad Seyfi: On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior. Materials Characterization 2011, 62, 108-117. https://www.sciencedirect.com/science/article/abs/pii/S104458031000323210.1016/j.matchar.2010.11.005
Search in Google Scholar Back to article
26. Adem Kurt., Ilyas Uygu., Eren Cete. Surface modification of aluminium by friction stir processing. Journal of Materials Processing Technology 2011, 211, 313–317. https://www.researchgate.net/publication/22923199010.1016/j.jmatprotec.2010.09.020
Search in Google Scholar Back to article
27. Mohammad Ali Moghaddas., Seyed Farshid Kashani-Bozorg., 2012. Effects of thermal conditions on micro-structure in nano composite of Al/Si3N4 produced by friction stir processing. Materials Science and Engineering A 2013, 559, 187–193. https://www.sciencedirect.com/science/article/abs/pii/S092150931201194X.10.1016/j.msea.2012.08.073
Search in Google Scholar Back to article
28. M. Mosallaee., M. Dehghan: Improvement of Structural and Mechanical Properties of Al-1100 Alloy via Friction Stir Processing. ASM International 2014, 1059-9495. https://link.springer.com/article/10.1007/s11665-014-1155-910.1007/s11665-014-1155-9
Search in Google Scholar Back to article
29. M. Salehi, M. Saadatmand, J., Aghazadeh Mohandesi: Optimization of process parameters for producing AA6061/SiC nanocomposites by friction stir processing. Trans. Nonferrous Met. Soc. China 2012, 22, 1055-1063. https://www.sciencedirect.com/science/article/abs/pii/S100363261161283110.1016/S1003-6326(11)61283-1
Search in Google Scholar Back to article

Investigation on the microstructure, microhardness, and tribological behavior of AA1100-hBN surface composite

Abstract

Paradigm

My account