The change in the morphology of the blasted surface after phosphating and cataphoretic coating

J. Brezinová; A. Guzanová; D. Draganovská; J. Brezina; J. Viňáš

doi:10.2478/kom-2020-0019

.blurhash-client-img { display: none !important; }

The change in the morphology of the blasted surface after phosphating and cataphoretic coating

Koroze a ochrana materiálu

Volume 64 (2020): Issue 4 (December 2020)

By: J. Brezinová, A. Guzanová, D. Draganovská, J. Brezina and J. Viňáš

Open Access

|Dec 2020

Abstract

The paper focuses on the quality of coatings applied by cataphoretic deposition and cataphoretic deposition technology with a phosphate layer. The quality of the coatings was evaluated by determining the roughness of the coatings, the morphology of the coatings, spectral analyses were performed detecting the presence of individual elements in the coatings. There was analysed also defect – uncoated spot.

References

1. Brezinová J., Guzanová, A., Draganovská D.: Abrasive Blast Cleaning and Its Application, Pfaffikon, Trans Tech Publications 2015, 107 p.
Search in Google Scholar Back to article
2. Brezinová J. et al.: Korózia materiálov a špeciálne technológie povrchových úprav, Košice, Technická univerzita v Košiciach 2020, 308 p.
Search in Google Scholar Back to article
3. Guzanová, A. et al.: A study of the effect of surface pre-treatment on the adhesion of coatings, Journal of Adhesion Science and Technology2014, 28, 1–18.10.1080/01694243.2014.920762
Search in Google Scholar Back to article
4. Brezinová J., Guzanová, A., Draganovská D.: Surface mechanical (Physical) Treatments Prior to Bonding, Handbook of Adhesive Technology, New York, CRC Press Taylor and Francis Group, 2018, 19-66.
Search in Google Scholar Back to article
5. Herbath B., Kovacs K.: The effects of the steel’s surface quality on the properties of anti-corrosion coatings, IOP Conf. Series: Materials Science and Engineering 2020, 903, 1–8.10.1088/1757-899X/903/1/012029
Search in Google Scholar Back to article
6. Narayanan T.S.N.S.: Surface pretreatment by phosphate conversion coatings – A review, Reviews on Advanced Materials Science2005, 9, 130–177.
Search in Google Scholar Back to article
7. Pokorný, P.: Předpokládaná účinnost konverzních povlaků proti aktivaci zinkované oceli v modelových pórových roztocích betonu, Koroze a ochrana materiálu2013, 57, 115–126.
Search in Google Scholar Back to article
8. Burduhos-Nergis D.P. et al.: Evaluation of the Corrosion Resistance of Phosphate Coatings Deposited on the Surface of the Carbon Steel Used for Carabiners Manufacturing, Applied Sciences2020, 10, 2753.10.3390/app10082753
Search in Google Scholar Back to article
9. Abdalla K., Rahmat A., Azizan A. The effect of pH on zinc phosphate coating morphology and its corrosion resistance on mild steel, Advanced Materials Research2013, 626, 569–574.10.4028/www.scientific.net/AMR.626.569
Search in Google Scholar Back to article
10. Zhao X. et al.: Corrosion resistance of concrete reinforced by zinc phosphate pretreated steel fiber in the presence of chloride ions, Materials2020, 13, 3636.10.3390/ma13163636
Search in Google Scholar Back to article
11. Sinha P. K., Feser R.: Phosphate coating on steel surfaces by an electrochemical method, Surface and Coatings Technology2002, 161, 158–168.10.1016/S0257-8972(02)00521-2
Search in Google Scholar Back to article
12. Jegannathan S. et al.: Formation of zinc phosphate coating by anodic electrochemical treatment, Surface and Coatings Technology2006, 200, 6014–6021.10.1016/j.surfcoat.2005.09.017
Search in Google Scholar Back to article
13. Matuška M., Kučerová M.: Moderní trendy v kataforéze, Povrchové úpravy 2018, 2, 15–18.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/kom-2020-0019 | Journal eISSN: 1804-1213 | Journal ISSN: 0452-599X

Journal RSS Feed

Language: English

Page range: 131 - 140

Published on: Dec 31, 2020

Published by: Association of Czech and Slovak Corrosion Engineers

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Related subjects:

Industrial chemistry,

Chemical engineering,

Materials sciences,

Ceramics and glass

© 2020 J. Brezinová, A. Guzanová, D. Draganovská, J. Brezina, J. Viňáš, published by Association of Czech and Slovak Corrosion Engineers
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 64 (2020): Issue 4 (December 2020)