References
- 1. J. Zhang: A review of steel corrosion by liquid lead and lead-bismuth, Corrosion Science, 2009, 38, 1207–1227.10.1016/j.corsci.2009.03.013
- 2. A. Hojná, P. Halodová, L. Rozumová, M. Chocholoušek, Z. Špirit: Environmentally assisted cracking of the T91 in heavy liquid metals, Corrosion Reviews, 2020, 38, 183–194.10.1515/corrrev-2019-0035
- 3. G. Müller, A. Heinzel, J. Konys, G. Schumacher, A. Weisenburger, F. Zimmermann, V. Engelko, A. Rusanov, V. Markov: Results of steel corrosion tests in flowing liquid Pb/Bi at 420-600 °C after 200 h, J. Nuc. Mat., 2002, 301, 40–46.10.1016/S0022-3115(01)00725-5
- 4. A. Weisenburger, K. Aoto, G. Müller, A. Heinzel, G. Schumacher, T. Furukawa: Behaviour of chromium steels in liquid Pb-55.5Bi with changing oxygen content and temperature, J. Nuc. Mat., 2006, 358, 69–76.10.1016/j.jnucmat.2006.07.001
- 5. A. Kimura, R. Kasada, N. Iwata, H. Kishimoto, C.H. Zhang, J. Isselin, P. Dou, J.H. Lee, N. Muthukumar, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa, T.F. Abe: Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems, J. Nuc. Mat., 2011, 417, 176–179.10.1016/j.jnucmat.2010.12.300
- 6. L. Tan, M.T. Machut, K. Sridharan, T.R. Allen: Corrosion behavior of a ferritic/martensitic steel HCM12A exposed to harsh environments, J. Nuc. Mat., 2007, 371, 161–170.10.1016/j.jnucmat.2007.05.001
- 7. J. Lim, I.S. Hwang, J.H. Kim: Design of alumina forming FeCrAl steels for lead or lead-bismuth cooled fast reactors, J. Nuc. Mat., 2013, 441, 650–660.10.1016/j.jnucmat.2012.04.006
- 8. Y. Yano, S. Yamashita, S. Ohtsuka, T. Kaito, N. Akasaka, T. Shibayama, S. Watanabe, H. Takahashi: Mechanical properties and microstructural stability of 11Cr-ferritic/martensitic steel cladding under irradiation, J. Nuc. Mat., 2010, 398, 59–63.10.1016/j.jnucmat.2009.10.010
- 9. V. Tsisar, C. Schroer, O. Wedemeyer, A. Skrypnik, J. Konys: Corrosion behavior of austenitic steels 1.4970, 316L and 1.4571 in flowing LBE at 450 and 550 °C with 10-7 mass% dissolved oxygen, J. Nuc. Mat., 2014, 454, 332–342.10.1016/j.jnucmat.2014.08.024
- 10. A. Heinzel, A. Weisenburger, G. Müller: Corrosion behavior of austenitic steels in liquid lead bismuth contining 10-6 wt% and 10-8 wt% oxygen at 400-500 °C, J. Nuc. Mat., 2014, 448, 163–171.10.1016/j.jnucmat.2014.01.046
- 11. F. Gnecco, E. Ricci, C. Bottino, A. Passerone: Corrosion behavior of steels in lead-bismuth at 823 K, J. Nuc. Mat., 2004, 335, 185–188.10.1016/j.jnucmat.2004.07.013
- 12. K. Lambrinou, V. Koch, G. Coen, J. Van den Bosch, C. Schroer: Corrosion scales on various steels after exposure to liquid lead-bismuth eutectic, J. Nuc. Mat., 2014, 450, 244–255.10.1016/j.jnucmat.2013.09.034
- 13. M. Del Giacco, A. Weisengurger, A. Jianu, F. Lang, G. Mueller: Influence of composition and microstructure on the corrosion behavior of different Fe–Cr–Al alloys in molten LBE, J. Nuc. Mat., 2012, 421, 39–46.10.1016/j.jnucmat.2011.11.049
- 14. A. Weisenburger, A. Jianu, S. Doyle, M. Brunus, R. Fetzer, A. Heinzel, M. DelGiacco, W. An, G. Müller: Oxide scales formed on Fe-Cr-Al-based model alloys exposed to oxygen containing molten lead, J. Nuc. Mat., 2013, 437, 282–292.10.1016/j.jnucmat.2013.02.044
- 15. A. Weisenburger, G. Müller, A. Heinzel, A. Jianu, H. Muscher, M. Kieser: Corrosion, Al containing corrosion barriers and mechanical properties of steels foreseen as structural materials in liquid lead alloy cooled nuclear systems, Nuc. Eng. Design, 2011, 241, 1329–1334.10.1016/j.nucengdes.2010.08.005
- 16. A. Heinzel, M. Kondo, M. Takahashi: Corrosion of steels with surface treatment and Al-alloying by GESA exposed in lead-bismuth, J. Nuc. Mat., 2006, 350, 264–270.10.1016/j.jnucmat.2006.01.014
- 17. V. Engelko, G. Mueller, A. Rusanov, V. Markov, K. Tkachenko, A. Weisenburger, A. Kashtanov, A. Chikiryaka, A. Jianu: Surface modification/alloying using intense pulsed electron beam as a tool for improving the corrosion resistance of steels exposed to heavy liquid metals, J. Nuc. Mat., 2011, 415, 270–275.10.1016/j.jnucmat.2011.04.030
- 18. S. Majumdar, A. Borgohain, V. Kain: Interaction between liquid lead-bismuth eutectic and aluminized Inconel 625 superalloy at 600 and 850 °C, J. Nuc. Mat., 2019, 518, 54–61.10.1016/j.jnucmat.2019.02.046
- 19. U. Jain, A. Mukjerjee, S. Sonak, S. Kumar, R. Mishra,”Interaction of alumina with liquid Pb83Li17 alloy, Fusion Eng. And Design, 2014, 2554-2558.10.1016/j.fusengdes.2014.06.007
- 20. Ch. Sun, X. Zhou, Ch. Xie: Effect of processing conditions on Al-based amorphous/nanocrystalline coating by cold-spraying, Surf. Coat. Tech., 2019, 362, 97–104.10.1016/j.surfcoat.2019.01.096
- 21. E. Miorin, F. Montagner, V. Zin, D. Giuranno, E. Ricci, M. Pedroni, V. Spanpinato, E. Vasallo, S.M. Deambrosis: Al rich PVD protective coatings: A promising approach to prevent T91 steel corrosion in stagnant liquid lead, Surf. Coat. Tech., 2019, 377, 124–890.10.1016/j.surfcoat.2019.124890
- 22. E. Vassallo, M. Pedroni, V. Spampinato, S.M. Deambrosis, E. Miorin, E. Ricci, V. Zin: Effect of alumina coatings on corrosion protection of steels in molten lead, J. Vac. Sci. Technol., 2018, 36.10.1116/1.4993286
- 23. F. García Ferré, A. Mairov, D. Iadicicco, M. Vanazzi, S. Bassini, M. Utili, M. Tarantino, M. Bragaglia, F.R. Lamastra, F. Nanni, L. Ceseracciu, Y. Serruys, P. Trocellier, L. Beck, K. Sridharan, M.G. Geghi, F. Di Fonzo: Corrosion and radiation resistant nanoceramic coatings for lead fast reactors, Cor. Sc., 2017, 124, 80–92.10.1016/j.corsci.2017.05.011
- 24. P. Lorusso, S. Bassini, A. Del Nevo, I. Di Piazza, F. Giannetti, M. Tarantino, M. Utili, “GEN-IV LFR development: Status & perspectives, Prog. Nuc. En., 2018, 105, 318–331.10.1016/j.pnucene.2018.02.005
- 25. F.G. Ferré, M. Ormellese, F. Di Fonzo, M.G. Beghi: Advanced Al2O3 coatings for high temperature operation of steels in heavy liquid metals: a preliminary study, Cor. Sci., 2013, 77, 375–378.10.1016/j.corsci.2013.07.039
- 26. F.G. Ferré, E. Bertarelli, A.Chiodoni, D. Carnelli, D. Gastaldi, P. Vena, M.G. Beghi, F. Di Fonzo: The mechanical properties of a nanocrystalline Al2O3/a-Al2O3 composite coating measured by nanoindentation and Brillouin spectroscopy, A. Mat., 2013, 61, 2662–2670.10.1016/j.actamat.2013.01.050
- 27. F.G. Ferré, A. Mairov, D. Iadicicco, M. Vanazzi, S. Bassini, M. Utili, M. Tarantino, M. Bragaglia, F.R. Lamastra, F. Nanni, L. Ceseracciu, Y. Serruys, P. Trocellier, L. Beck, K. Sridharan, M.G. Beghi, F. Di Fonzo: Corrosion and radiation resistant nanoceramic coatings for lead fast reactors, Cor. Scie., 2017, 124, 80–92.10.1016/j.corsci.2017.05.011
- 28. R. Kasada, P. Dou: Sol-gel composite coatings as anti-corrosion barrier for structural materials of lead-bismuth eutectic cooled fast reactor, J. Nuc. Mat., 2013, 440, 647–653.10.1016/j.jnucmat.2013.06.014
- 29. P. Dou, P. Kasada: Preliminary study on nano- and micro-composite sol-gel based alumina coatings on structural components of lead-bismuth eutectic cooled fast breeder reactors, J. Nuc. Mat., 2011, 409, 177–182.10.1016/j.jnucmat.2010.11.022
- 30. Q. Jiao, F. Guo, Ch. Li, G. Zheng, J. He, H. Zhao, Y. Qin, F. Yin: Effects of Mo addition on tribological performance of plasma- sprayed Ti-Si-C coatings, Ceramics International, 2020, 46, 12948–12954.10.1016/j.ceramint.2020.02.064
- 31. M. Braic, A. Vladescu, A.C. Parau, C.I. Pruncu, V. Braic: Tribological properties of alloed TiSi-stainless steel carbide coatings deposited by reactive cathodic arc method, Wear, 2020, 460–461, 203456.10.1016/j.wear.2020.203456
- 32. S.K. Mishra, V.A. Sherbakov: In-situ synthesis of Ti-Si-C fine grained composite with different amount of TiC: Microstructure and mechanical properties, Int. J. Ref. Met. H. Mat., 2016, 59, 19–25.10.1016/j.ijrmhm.2016.05.008
- 33. C. Vetelaru, M. Balaceanu, A. Parau, C.R. Luculescu, A. Vladescu: Investigation of nanostructured TiSiC-Zr and TiSiC-Cr hard coatings for industrial applications, Surf. Coat. Tech., 2014, 251, 21–28.10.1016/j.surfcoat.2014.04.001
- 34. M. Braic, A. Vladescu, M. Balaceanu, C. Luculescu, S.C. Padmanabhan, L. Constantin, M.A. Morris, V. Braic, C.E.A. Grigorescu, P. Ionescu, M.D.Dracea, C. Logofatu: A comparative study of the structural, mechanical and tribological characteristics of TiSiC–Cr coatings prepared in CH4 and C2H2 reactive atmosphere by cathodic vacuum arc, J. Nuc. Mat., 2017, 400, 318–328.10.1016/j.apsusc.2016.12.160
- 35. K.A. Kuptsov, Ph.V. Kiryukhantsev-Korneev, A.N. Sheveyko, D.V. Shtansky: Comparative study of electrochemical and impact war behavior of TiCN, TiSiCN, TiCrSiCN, and TiAlSiCN, Surf. Coat. Tech., 2013, 216, 273–281.10.1016/j.surfcoat.2012.11.058
- 36. S.K. Mishra, Hkusboo, V.A. Sherbakov: Fabrication of in-situ Ti-Si-C fine grained composite by the self propagating high temperature synthesis (SHS) process, Int. J. Ref. Met. H. Mat., 2011, 29, 209–213.10.1016/j.ijrmhm.2010.10.008
- 37. J. Lauridsen, P. Eklund, T. Joelsson, H. Ljungcranz, Å. Öberg, E. Lewin, U. Jansson, M. Beckers, H. Högberg, L. Hultman: High-rate deposition of amorphous and nanocomposite Ti-Si-C multifunctional coatings, Surf. Coat. Tech., 2010, 205, 299–305.10.1016/j.surfcoat.2010.06.051
- 38. A. Iveković, S. Novak, G. Dražić, D. Blagoeva, S. Gonzalez de Vincente: Current status and prospects of SiCf/SiC for fucion structural application, J. Eu. Cer. Soc., 2013, 33, 1577–1589.10.1016/j.jeurceramsoc.2013.02.013