Mechanical and corrosion properties of iron-mangan materials sintered in the presence of plasma

Králová Z. Orságová; M. Kupková; M. Hrubovčáková; A. Zeleňák; R. Oriňaková; Turoňová A. Morovská; K. Žáková; M. Kupka; K. Kovaľ; I. Šišoláková

doi:10.2478/kom-2020-0001

.blurhash-client-img { display: none !important; }

Mechanical and corrosion properties of iron-mangan materials sintered in the presence of plasma

Koroze a ochrana materiálu

Volume 64 (2020): Issue 1 (March 2020)

By: Králová Z. Orságová, M. Kupková, M. Hrubovčáková, A. Zeleňák, R. Oriňaková, Turoňová A. Morovská, K. Žáková, M. Kupka, K. Kovaľ and I. Šišoláková

Open Access

|May 2020

Abstract

The current trend in development of new metallic materials for certain types of implants is turning away from permanent, biologically inert materials to the use of biodegradable materials. Fe–Mn alloys represent high perspective material for development of new generation of temporary and biodegradable implants. The aim of this work was to study mechanical and corrosion characteristics of powder samples containing 25, 30 and 35 wt % of Mn which are fabricated by pressing, sintering, and additional spark plasma sintering. The influence of preparation method (pressing and sintering) to microstructure, phased composition and corrosion behavior of prepared alloys was studied.

References

1. Chen F.; Liu X.: Progress in Polymer Science Advancing biomaterials of human origin for tissue engineering. Progress in Polymer Science2016, 53 (1), 86–168.10.1016/j.progpolymsci.2015.02.004480805927022202
Search in Google Scholar Back to article
2. Oriňaková R.; Gorejová R.; Králová Orságová Z.; Oriňak A.; Maskaľová I.; Kupková M.; Baláž M.; Hrubovčáková M.; Sopčák T.; Zubrik A.; Oriňak M.: Evaluation of Mechanical Properties and Hemocompatibility of Open Cell Iron Foams with Polyethylene Glycol Coating. Applied Surface Sciience2019, 144 634.10.1016/j.apsusc.2019.144634
Search in Google Scholar Back to article
3. Navarro M.; Michiardi A.; Castan O.; Planell J. A. Biomaterials in orthopaedics. Journal of the Royal Society Interface2008, 5, 1137–1158.10.1098/rsif.2008.0151270604718667387
Search in Google Scholar Back to article
4. Datta L. P.; Manchineella S.; Govindaraju T.: Biomolecules-derived Biomaterials. Biomaterials2019, 119 633.10.1016/j.biomaterials.2019.11963331831221
Search in Google Scholar Back to article
5. Oriňakova R.; Gorejová R.; Macko J.; Oriňak A.; Kupková M.; Hrubovčakova M.; Ševc J.; Smith R.M.: Evaluation of in vitro biocompatibility of open cell iron structures with PEG coating. Applied Surface Science2019, 475, 515–518.
Search in Google Scholar Back to article
6. Park, J.; Lakes, R. S. Biomaterials, 3rd ed.; Springer-Verlag New York: New York, 2007.
Search in Google Scholar Back to article
7. Binyamin, G.; Shafi, B.; Mery, C.: Biomaterials: A primer for surgeons. Chitin-Chitosan: Myriad Functionalities in Science and Technology; 2006; 276–283.10.1053/j.sempedsurg.2006.07.00717055958
Search in Google Scholar Back to article
8. Nawrat, Z.: Review of Research in Cardiovascular Devices. Review of Handbook of Polymer Applications in Medicine and Medical Devices; 2009; 145–189.10.1016/B978-0-323-22805-3.00008-6
Search in Google Scholar Back to article
9. Tabraiz S.; Ansari A.Q.; Urooj S.; Aldobali M.: A Review based on Coronary Biodegradable and Bioabsorbable Stents for Artery Disease Coronary. Procedia Computer Science2019, 152, 354–359.
Search in Google Scholar Back to article
10. Prajapati S.K.; Jain A.; Jain S.; Tirth B.; College P. Bio-degradable polymers and constructs: A novel approach in drug delivery. European Polymer Journal2019, 109 191.10.1016/j.eurpolymj.2019.08.018
Search in Google Scholar Back to article
11. Jiang T.; Duan Q.; Zhu J.; Liu L.; Yu L.: Starch-based Biodegradable Materials: Challenges and Opportunities. Advanced Industrial Engeneering and Polymer Research2019.10.1016/j.aiepr.2019.11.003
Search in Google Scholar Back to article
12. Linsley C.; Li X.; North S.M.E.; Guan Z.; Pan S.; Linsley C.; Li X.: Manufacturing and Characterization of as Potential Biodegradable Material. Procedia Manufacturing2019, 34, 247–251.
Search in Google Scholar Back to article
13. Zheng Y. F.; Gu X. N.; Witte F.: Biodegradable metals. Material Science and Engeneering R2014, 77, 1–34.
Search in Google Scholar Back to article
14. Hermawan H.; Purnama A.; Dube D.; Couet J.; Mantovani D.: Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies. Acta Biomaterialia2010, 6, 1852–1860.
Search in Google Scholar Back to article
15. Shreyas P.; Panda B.; Kumar R.: Materials Today: Proceedings Mechanical properties and microstructure of 316L- galvanized steel weld. Materials Today: Proceeding2019 5–12.10.1016/j.matpr.2019.05.418
Search in Google Scholar Back to article
16. Dehghan-Manshadi A.; St John D.H.; Dargusch M.S.: Tensile Properties and Fracture Behaviour of Biodegradable Iron-Manganese Scaffolds Produced by Powder Sintering. Materials2019,12, 157210.3390/ma12101572656615631091657
Search in Google Scholar Back to article
17. Dargusch M.S.; Dehghan-Manshadi A.; Shahbazi M.; Venezuela J.; Tran X.; Song J.; Liu N.; Xu C.; Ye Q. S.; Wen C. E.: Exploring the Role of Manganese on the Microstructure, Mechanical Properties, Biodegradability, and Biocompatibility of Porous Iron-Based Scaffolds. Acs Biomaterials Science & Engineering2019, 5, 1686-170210.1021/acsbiomaterials.8b0149733405546
Search in Google Scholar Back to article
18. Pustov, Y.A.; Zhukova, Y.S.; Malikova, P.E.; Prokoshkin, S.D.; Dubinskii, S.M.: Structure and Corrosion-Electro-chemical Behavior of Bioresorbable Alloys Based on the Fe-Mn System. Prot. Met. Phys. Chem. Surf.2018, 54, 469-476.
Search in Google Scholar Back to article
19. Hong D.; Chou D. T.; Velikokhatnyi O. I.; Roy A.; Lee B.; Swink I.; Issaev I.; Kuhn H.A.; Kumta P.N.: Binder-Jetting 3D Printing and Alloy Development of New Biodegradable Fe–Mn–Ca/Mg Alloys. Acta Biomaterialia2016, 45, 375-386.
Search in Google Scholar Back to article
20. Hermawan H.; Dubé D.; Mantovani D.: Degradable Metallic Biomaterials: Design and Development of Fe–Mn Alloys for Stents. J Biomed Mater Res A2010, 93A, 1-11.10.1002/jbm.a.3222419437432
Search in Google Scholar Back to article
21. Donik Č.; Kocijan A.; Paulin I.; Hočevar M.; Gregorčič P.; Godec M.: Improved Biodegradability of Fe–Mn Alloy After Modification of Surface Chemistry and Topography by a Laser Ablation. Applied Surface Science2018, 453, 383-393.
Search in Google Scholar Back to article
22. Shuai C. Li S.; Peng S.; Feng P.; Lai Y.; Gao C.: Biodegradable Metallic Bone Implants. Mater Chem Front2019, 3, 544-562.
Search in Google Scholar Back to article
23. Drynda A.; Hassel T.; Bach F. W.; Peuster M.: In Vitro and In Vivo Corrosion Properties of New Iron–Manganese Alloys Designed for Cardiovascular Applications. J Bio Mat Res B2014, 103, 649-660.
Search in Google Scholar Back to article
24. Campos N.; Gierl-mayer C.; Oro R.; Torralba M.; Danninger H.: New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior. Metallurgical and Materials Transaction2015, 46, 1349–1359.
Search in Google Scholar Back to article
25. Berkowitz B.; Ewing R.P.: Percolation Theory and Network Modelling Application in Soil Physics. Surveys in Geophysics1998, 19, 23-72.
Search in Google Scholar Back to article
26. Balberg I.: Recent Developments in Continuum Percolation, Philosophical Magazine B1987, 56, 991-1003.10.1080/13642818708215336
Search in Google Scholar Back to article
27. Kupková M.; Hrubovčáková M.; Zeleňák A.; Sułowski M.; Ciaś A.; Oriňáková R.; Morovská Turoňová A.; Žáková K.; Kupka, M.: Dimensional Changes, Microstructure, Microhardness Distributions And Corrosion Properties Of Iron And Iron-Manganese Sintered Materials. Archives of Metallurgy and Materials2015, 60 (2), 639–642.10.1515/amm-2015-0185
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/kom-2020-0001 | Journal eISSN: 1804-1213 | Journal ISSN: 0452-599X

Journal RSS Feed

Language: English

Page range: 1 - 10

Published on: May 4, 2020

Published by: Association of Czech and Slovak Corrosion Engineers

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Related subjects:

Industrial chemistry,

Chemical engineering,

Materials sciences,

Ceramics and glass

© 2020 Králová Z. Orságová, M. Kupková, M. Hrubovčáková, A. Zeleňák, R. Oriňaková, Turoňová A. Morovská, K. Žáková, M. Kupka, K. Kovaľ, I. Šišoláková, published by Association of Czech and Slovak Corrosion Engineers
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 64 (2020): Issue 1 (March 2020)