Deposition of titanium based coatings by reactive detonation spraying

Panin, S.; Vlasov, I.; Dudina, D.; Ulyanitsky, V.; Stankevich, R.; Batraev, I.; Maruschak, P.; Landová, M.

doi:10.2478/kom-2018-0002

Abstract

The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the carrier gas, the spraying distance, the O₂/C₂H₂ ratio, and the volume of the explosive mixture. The phase composition of the coatings and the influence of the spraying parameters on the mechanical properties of the coatings were investigated. In addition, nanohardness of the individual phases contained the coatings was evaluated. It was found that the composition of the strengthening phases in the coatings depends on the O₂/C₂H₂ ratio and the nature of the carrier gas. Detonation spraying conditions ensuring the formation of composite coatings with a set of improved mechanical properties are discussed.

References

1. Nikitenkov N.N.: Modern Technologies for Creating the Thin-film Systems and Coatings, 1^st ed., InTech, London, 2017, DOI: 10.5772/63326.10.5772/63326
Open DOI Search in Google Scholar Back to article
2. Deevi S.C., Sikka V.K. Application of reaction synthesis principles to thermal spray coatings, Journal of Materials Science, 1997, 32, 3315-3325.10.1023/A:1018691826809
Open DOI Search in Google Scholar Back to article
3. Fauchais P., Montavon G., Lima R.S., Marple B.R. Engineering a new class of thermal spray nano-based micro-structures from agglomerated nanostructured particles, suspensions and solutions: an invited review Journal of Physics D: Applied Physics, 2011, 44, 093001.10.1088/0022-3727/44/9/093001
Search in Google Scholar Back to article
4. Kovaleva M., Tyurin Yu, Kolisnichenko O., Prozorova M., and Arseenko M. Properties of detonation nanostructured titanium-based coatings, Journal of Thermal Spray Technology, 2013, 22, 518-524.10.1007/s11666-013-9909-8
Open DOI Search in Google Scholar Back to article
5. Lidong Zhao, Erich Lugscheider Reactive plasma spraying of TiAl6V4 alloy, Wear, 2002, 253, 1214-1218.10.1016/S0043-1648(02)00246-6
Search in Google Scholar Back to article
6. Fauchais P., Montavon G., Bertrand G. From powders to thermally sprayed coatings, Journal of Thermal Spray Technology,2010, 19, 56-80.10.1007/s11666-009-9435-x
Search in Google Scholar Back to article
7. Valente T., Galliano F.P. Corrosion resistance properties of reactive plasma-sprayed titanium composite coatings, Surface and Coatings Technology, 2000, 127, 86-92.10.1016/S0257-8972(00)00549-1
Search in Google Scholar Back to article
8. Ulianitsky V.Y., Dudina D.V., Batraev I.S., Kovalenko A.I., Bulina N.V., Bokhonov B.B. Detonation spraying of titanium and formation of coatings with spraying atmosphere-dependent phase composition, Surface and Coatings Technology, 2015, 261, 174-180.10.1016/j.surfcoat.2014.11.038
Search in Google Scholar Back to article
9. Yao Y., Wang Z., Zhou Z., Jiang S., Shao J. Study on reactive atmospheric plasma-sprayed in situ titanium compound composite coating, Journal of Thermal Spray Technology, 2013, 22, 509-517.10.1007/s11666-013-9907-x
Open DOI Search in Google Scholar Back to article
10. Peat T., Gallowaya A., Toumpis A., McNutt P., Iqbal N. The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing, Applied Surface Science, 2017, 396, 1635–1648.10.1016/j.apsusc.2016.10.156
Search in Google Scholar Back to article
11. Klinkov S.V., Kosarev V.F., Sova A.A., Smurov I. Deposition of multicomponent coatings by cold spray, Surface and Coatings Technology, 2008, 202, 5858-5862.10.1016/j.surfcoat.2008.06.171
Search in Google Scholar Back to article
12. Dongmo E., Wenzelburger M., Gadow R. Analysis and optimization of the hvof process by combined experimental and numerical approaches, Surface and Coatings Technology, 2008, 202, 4470-4478.10.1016/j.surfcoat.2008.04.029
Search in Google Scholar Back to article
13. Smurov I., Ulianitsky V. Computer controlled detonation spraying, Surface Engineering, 2011, 27, 557-559.10.1179/174329411X13092681464923
Search in Google Scholar Back to article
14. Senderowski C., Chodala M., Bojar Z. Corrosion behavior of detonation gun sprayed Fe-Al type intermetallic coating, Materials, 2015, 8, 1108-1123.10.3390/ma8031108545544628787991
Search in Google Scholar Back to article
15. Saladi S., Menghani J., Prakash S. Effect of CeO₂ on cyclic hot-corrosion behavior of detonation-gun sprayed Cr₃C₂-NiCr coatings on Ni-based superalloy, Journal of Materials Engineering and Performance, 2015, 24, 1379-1389.10.1007/s11665-015-1400-x
Search in Google Scholar Back to article
16. Senderowski C. Nanocomposite Fe-Al intermetallic coating obtained by gas detonation spraying of milled self-decomposing powder, Journal of Thermal Spray Technology, 2014, 23, 1124-1134.10.1007/s11666-014-0086-1
Open DOI Search in Google Scholar Back to article
17. Ulianitsky V., Shtertser A., Zlobin S. et al. Computer-controlled detonation spraying: from process fundamentals toward advanced, Journal of Thermal Spray Technology, 2011, 20, 791-801.10.1007/s11666-011-9649-6
Open DOI Search in Google Scholar Back to article
18. Isakov M., Matikainen V., Koivuluoto H., May M. Systematic analysis of coating-substrate interactions in the presence of flow localization, Surface and Coatings Technology, 2017, 324, 264-280.10.1016/j.surfcoat.2017.05.040
Search in Google Scholar Back to article
19. Gere J.M., Goodno B.J. Mechanics of Materials, 8^th edition, Cengage Learning, Canada, 2012.
Search in Google Scholar Back to article

Deposition of titanium based coatings by reactive detonation spraying

Abstract

Paradigm

My account