Have a personal or library account? Click to login
Flow over thin-plate weirs with a triangular notch – influence of the relative width of approach channel with a rectangular cross-section Cover

Flow over thin-plate weirs with a triangular notch – influence of the relative width of approach channel with a rectangular cross-section

Open Access
|May 2024

References

  1. Ali, A.A.M, Ibrahim, M., Diwedar, A.I., 2015. The discharge coefficient for a compound sharp crested V-notch weir. Asian J. Eng. Technol., 3, 5, 494–501.
  2. Allerton, R.W., 1932. Flow of water over triangular weirs. Thesis. Princeton University, Princeton.
  3. Barr, J., 1910. Experiments upon the flow of water over triangular notches. Engineering, 89, 435–437, 470–473.
  4. Barrett, F.B., 1931. The flow of water over triangular weirs. Thesis. Princeton University, Princeton.
  5. Bautista-Capetillo, C., Robles, O., Júnez-Ferreira, H., Playán, E., 2013. Discharge coefficient analysis for triangular sharpcrested weirs using low-speed photographic technique. J. Irrig. Drain. Eng. - ASCE, 140, 3, 06013005.
  6. Bazin, H., 1890. Recent experiments on the flow of water over weirs. Proceedings of the Engineers’ Club of Philadelphia, 7, 260–310.
  7. Bos, M.G., 1989. Discharge measurement structures. 3. ILRI.
  8. Carter, R.W., 1956. A comprehensive discharge equation for rectangular-notch weirs. Thesis. Georgia Institute of Technology, Atlanta.
  9. Cone, V.M., 1916. Flow through weir notches with thin edges and full contractions. J. Agric. Res., 5, 23, 1051–1113.
  10. Gabriel, P., 2023. Influence of approach channel width on flow over thin-plate weir with triangular notch. BS. Thesis. Brno University of Technology, Brno. (In Czech.) https://dspace.vutbr.cz/bitstream/handle/11012/211464/finalthesis.pdf?sequence=-1
  11. Greve, F.W., 1930. Calibration of 16 triangular weirs at Prude. Eng. News-Rec., 105, 5, 166–167.
  12. Greve, F.W., 1932. Flow of water through circular, parabolic, and triangular vertical notch-weirs. Eng. Bulletin Purdue University, 40, 2–84.
  13. Greve, F.W., 1945. Flow of liquids through vertical circular orifices and triangular weirs. Eng. Bull. Purdue University, 29, 3, 1–68.
  14. Hager, W.H., 1990. The V-notch weir. Wasser Energie Luft = Eau énergie air = Acqua energia aria, 82, 1–2, 9–14. (In German.) http://doi.org/10.5169/seals-939771
  15. Hattab, M.H., Mijic, A., Vernon, D., 2019. Optimised triangular weir design for assessing the full-scale performance of green infrastructure. Water, 4, 11, 773–790. https://doi.org/10.3390/w11040773
  16. Chanson, H., Wang, H., 2013. Unsteady discharge calibration of a large V-notch weir. Flow Meas. Instrum., 29, 19–24. https://doi.org/10.1016/j.flowmeasinst.2012.10.010
  17. ISO 1438, 2017. Hydrometry – Open channel flow measurement using thin-plate weirs. 3. ISO, Geneva.
  18. Kindsvater, C., Carter, R., 1957. Discharge characteristics of the rectangular thin-plate weirs. J. Hydraul. Div. - ASCE, 83, 1–36. https://doi.org/10.1061/TACEAT.0007696
  19. King, H.W., 1916. Flow of water over right-angled V-notch weir. The Michigan Technic, 29, 3, 189–195.
  20. Lenz, A.T., 1942. Viscosity and surface tension effects on Vnotch weir coefficients. Trans. Am. Soc. Civ. Eng., 351–374.
  21. Martínez, J., Reca, J., Morillas, M.T., López, J.G., 2005. Design and calibration of a compound sharp-crested weir. J. Hydraul. Eng. - ASCE, 131, 2, 112–116. https://doi.org/10.1061/(ASCE)0733-9429(2005)131:2(112)
  22. Milburn, P., Burney, J., 1988. V-notch weir boxes for measurement of subsurface drainage system discharges. Can. Agr. Eng., 30, 2, 209–212.
  23. Novak, P., Čábelka, J., 1981. Models in Hydraulic Engineering: Physical Principles and Design Applications. Pitman, London.
  24. Numachi, F., Hutizawa, S., 1941a. On the overflow coefficient of a right-angled triangular weir (2. Notice). J. Soc. Mech. Eng., 44, 286, 286. (In Japanese.) https://doi.org/10.1299/jsmemag.44.286_5_1
  25. Numachi, F., Hutizawa, S., 1941b. On the overflow coefficient of a right-angled triangular weir (2. Notice). Trans. Jpn. Soc. Mech. Eng., 7, 27–3, 5–9. (In Japanese.) https://doi.org/10.1299/kikai1938.7.27-3_5
  26. Numachi, F., Hutizawa, S., 1942a. On the overflow coefficient of a right-angled triangular weir (3. Notice). J. Soc. Mech. Eng., 45, 308, 725. (In Japanese.) https://doi.org/10.1299/jsmemag.45.308_725_2
  27. Numachi, F., Hutizawa, S., 1942b. On the overflow coefficient of a right-angled triangular weir (3. Notice). Trans. Jpn. Soc. Mech. Eng., 8, 33–3, 37–40. (In Japanese.) https://doi.org/10.1299/kikai1938.8.33-3_37
  28. Numachi, F., Kurokawa, T., Hutizawa, S., 1940a. On the overflow coefficient of a right-angled triangular weir. J. Soc. Mech. Eng., 43, 275, 45. (In Japanese.) https://doi.org/10.1299/jsmemag.43.275_45_2
  29. Numachi, F., Kurokawa, T., Hutizawa, S., 1940b. On the overflow coefficient of a right-angled triangular weir. Trans. Jpn. Soc. Mech. Eng., 6, 22–3, 10–14. (In Japanese.) https://doi.org/10.1299/kikai1938.6.22-3_10
  30. Numachi, F., Saito, I., 1948. On allowable shortest length of channel for triangular notch. J. Soc. Mech. Eng., 51, 357, 229–230. (In Japanese.) https://doi.org/10.1299/jsmemag.51.357_229_2
  31. Numachi, F., Saito, I., 1951. On allowable shortest length of channel for triangular notch. Trans. Jpn. Soc. Mech. Eng., 17, 56, 1–3. (In Japanese.) https://doi.org/10.1299/kikai1938.17.1
  32. Piratheepan, M., Winston, N.E.F., Pathirana, K.P.P., 2007. Discharge measurements in open channels using compound sharp-crested weirs. J. Inst. Eng., 40, 3, 31–38. https://doi.org/10.4038/engineer.v40i3.7144
  33. Pospíšilík, Š., 2020. 2.67° triangular-notch thin-plate weir. In: Juniorstav 2020. ECON Publishing, Brno, pp. 598–603. (In Czech.)
  34. Pospíšilík, Š., 2023. Influence of the relative approach channel width on the flow over thin–plate weir with triangular notch of the angle 30.53°. In: Juniorstav 2023. ECON Publishing, Brno, pp. 588–594.
  35. Pospíšilík, Š., Zachoval, Z., 2023. Discharge coefficient, effective head and limit head in the Kindsvater-Shen formula for small discharges measured by thin-plate weirs with a triangular notch. J. Hydrol. Hydromech., 71, 1, 35–48. https://doi.org/10.2478/johh-2022-0040
  36. Schoder, E.W., Turner, K.B., 1929. Precise weir measurements. Trans. Am. Soc. Civ. Eng., 1929, 93, 999–1190.
  37. Shen, J., 1981. Discharge characteristics of triangular-notch thin plate weirs: Studies of flow of water over weirs and dams. Geological survey water-supply paper, 1617-B. U. S. Government Printing Office, Washington.
  38. Strickland, T.P., 1910. Mr. James Barr’s experiments upon the flow of water over triangular notches. Engineering, 90, 598.
  39. Thomson, J., 1858. On experiments on the measurement of water by triangular notches in weir boards. In: Proc. Twenty-eight Meeting of the British Association for the Advancement of Science. John Murray, London, pp. 181–185.
  40. Thomson, J., 1861. On experiments on the gauging of water by triangular notches. In: Proc. Thirty-first Meeting of the British Association for the Advancement of Science. John Murray, London, pp. 151–158.
  41. Yarnall, D.R., 1912. The V-notch weir method of measurement. J. Am. Soc. Mech. Eng., 34, 2, 1479–1494.
  42. Yarnall, D.R., 1927. Accuracy of the V-notch-weir method of measurement. Trans. Am. Soc. Mech. Eng., 48, 939–964.
  43. Zmítko, J., 2020. Full-width thin-plate rectangular weir influenced by channel width. MS. Thesis. Brno University of Technology, Brno. (In Czech.) https://dspace.vutbr.cz/handle/11012/184201
DOI: https://doi.org/10.2478/johh-2024-0008 | Journal eISSN: 1338-4333 | Journal ISSN: 0042-790X
Language: English
Page range: 199 - 206
Submitted on: Nov 27, 2023
|
Accepted on: Mar 12, 2024
|
Published on: May 9, 2024
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year

© 2024 Šimon Pospíšilík, Zbyněk Zachoval, Pavel Gabriel, published by Slovak Academy of Sciences, Institute of Hydrology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.