References
- C. Fisher, L. N. Skolrood, K Li, P. C. Joshi, and T. Aytug, “Aerosol‐jet printed sensors for environmental, safety, and health monitoring: a review”. Advanced Materials Technologies, vol. 8, no. 15, pp. 2300030, 2023
- M. Menniti, F. Laganà, G. Oliva, M. G. Bianco, A. S. Fiorillo and S. A. Pullano, “Development of Non-Invasive Ventilator for Homecare and Patient Monitoring System”. Electronics, vol. 13, pp. 790, 2024, https://doi.org/10.3390/electronics13040790.
- Y. Luo, Z. Shi, S. Qiao, A. Tong, X. Liao, T. Zhang, and W. Xu, “Advances in nanomaterials as exceptional fillers to reinforce carbon fibre‐reinforced polymers composites and their emerging applications”. Polymer Composites, vol. 46, no. 1, 2024.
- T. Pak, N. L. Archilha, S. Berg, and I. B. Butler, “Design considerations for dynamic fluid flow in porous media experiments using X-ray computed micro tomography – A review”. Tomography of Materials and Structures, vol. 3, pp.100017, 2023.
- F. Laganà, D. Prattico, D. De Carlo, G. Oliva, S. A. Pullano and S. Calcagno, “Engineering Biomedical Problems to Detect Carcinomas: A Tomographic Impedance Approach”. Eng, vol. 5, pp. 1594-1614, 2024. https://doi.org/10.3390/eng5030084.
- A. D. Castro-Franco, M. Siqueiros-Hernández, V. García-Angel, I. Mendoza-Muñoz, L. E. Vargas-Osuna and H. D. Magaña-Almaguer, “A Review of Natural Fibre-Reinforced Composites for Lower-Limb Prosthetic Designs”. Polymers, vol. 16, no. 9, pp. 1293, 2024.
- Z. Pásztory, “An overview of factors influencing thermal conductivity of building insulation materials”. Journal of Building Engineering, vol. 44, pp. 102604, 2021.
- M. Versaci, G. Angiulli, F. La Foresta, F. Laganà, and A. Palumbo, “Intuitionistic fuzzy divergence for evaluating the mechanical stress state of steel plates subject to bi-axial loads”. Integrated Computer-Aided Engineering, vol. 31, no. 4, pp. 363-379, 2024. https://doi.org/10.3233/ICA-230730.
- M. Hamed, C. Zhang, A. M. Khan, M. Saleem and M. D. Musanur, “Holistic review of drilling on CFRP composites: Techniques, FEM, sustainability, challenges, and advances”. The International Journal of Advanced Manufacturing Technology, pp. 1-36, 2024.
- M. Versaci, F. Laganà, F. C. Morabito, A. Palumbo, G. Angiulli, “Adaptation of an Eddy Current Model for Characterizing Subsurface Defects in CFRP Plates Using FEM Analysis Based on Energy Functional”. Mathematics, vol. 12, no. 18, pp.2854, 2024. https://doi.org/10.3390/math12182854.
- P. Farinha, J. M. Coelho, C. P. Reis and M. M. Gaspar, “A comprehensive updated review on magnetic nanoparticles in diagnostics”. Nanomaterials, vol. 11, no. 12, pp. 3432, 2021.
- M. Bernard, E. Jubeli, M. D. Pungente and N. Yagoubi, “Biocompatibility of polymer-based biomaterials and medical devices–regulations, in vitro screening and risk-management”. Biomaterials science, vol. 6, no. 8, pp. 2025-2053, 2018.
- C. Camara, P. Peris-Lopez and J. E. Tapiador, “Security and privacy issues in implantable medical devices: A comprehensive survey”. Journal of biomedical informatics, vol. 55, pp. 272-289, 2015.
- M. Versaci, G. Angiulli, F. La Foresta, P. Crucitti, F. Laganá, D. Pellicanó and A. Palumbo, “Innovative soft computing techniques for the evaluation of the mechanical stress state of steel plates”. In Applied intelligence and informatics AII 2022. Communications in Computer and Information Science, Springer, Cham., vol. 1724, https://doi.org/10.1007/978-3-031-24801-6_2.
- M. Versaci, G. Angiulli, P. Crucitti, D. De Carlo, F. Laganà, D. Pellicanò and A. Palumbo, “A fuzzy similarity-based approach to classify numerically simulated and experimentally detected carbon fibre-reinforced polymer plate defects”. Sensors, vol. 22, no. 11, pp. 4232, 2022. https://doi.org/10.3390/s22114232.
- M. Versaci, F. La Foresta, F. C. Morabito and G. Angiulli, “A Fuzzy divergence approach for solving electrostatic identification problems for NDT applications”. International Journal of Applied Electromagnetics and Mechanics, vol. 57, no. 2, pp. 133-146, 2018.
- J. Park, H. W. Kim, S. Lim, H. Yi, Z. Wu, I. G Kwon and K. J. Yu, “Conformal Fixation Strategies and Bioadhesives for Soft Bioelectronics”. Advanced Functional Materials, 2313728, 2024.
- S. Rojekar, S. Parit, A. D. Gholap, A. Manchare, S. N. Nangare, N. Hatvate and R. G. Ingle, “Revolutionizing Eye Care: Exploring the Potential of Microneedle Drug Delivery”. Pharmaceutics, vol. 16, no. 11, pp. 1398, 2024.
- Y. Zhang, M. Wang, X., Zhang, Z. Qu, Y. Gao, Q. Li and X. Yu, “Mechanism, indexes, methods, challenges, and perspectives of edible oil oxidation analysis”. Critical Reviews in Food Science and Nutrition, vol. 63, no. 21, pp. 4901-4915, 2023.
- S. F. Iftekar, A. Aabid, A. Amir and M. Baig, “Advancements and limitations in 3D printing materials and technologies: a critical review”. Polymers, vol. 15, no. 11, pp. 2519, 2023.
- F. Laganà, D. Pratticò, G. Angiulli, G. Oliva, S. A. Pullano, M. Versaci and F. La Foresta, “Development of an Integrated System of sEMG Signal Acquisition, Processing, and Analysis with AI Techniques”. Signals, vol. 5, pp. 476-493, 2024. https://doi.org/10.3390/signals5030025
- C. Ieracitano, J. Duun-Henriksen, N. Mammone, F. La Foresta and F. C. Morabito, “Wavelet coherence-based clustering of EEG signals to estimate the brain connectivity in absence epileptic patients,” 2017 International Joint Conference on Neural Networks (IJCNN), Anchorage, AK, USA, 2017, pp. 1297-1304, doi: 10.1109/IJCNN.2017.7966002.
- N. T. Tuli, S. Khatun and A. B. Rashid, “Unlocking the future of precision manufacturing: A comprehensive exploration of 3D printing with fibre-reinforced composites in aerospace, automotive, medical, and consumer industries. Heliyon, vol. 10, no. 5, pp. e27328
- L. E. de Castro Saiki and G. F. Gomes, “Understanding and mitigating delamination in composite materials: A comprehensive review”. Mechanics of Advanced Materials and Structures, vol. 31, no. 30, pp. 13147–13167, 2024. https://doi.org/10.1080/15376494.2024.2333490
- L. E. de Castro Saiki and G. F. Gomes, “Comparative analysis of modal, static, and buckling behaviors in thin-walled composite cylinders: A detailed study”. Composite Structures, vol. 352, pp. 118672, 2025.
- N. Zhang, Z. Luo, Z. Chen, F. Liu, P. Liu, W. Chen, L. Wu and L. Zhao, “Thermal–hydraulic–mechanical–chemical coupled processes and their numerical simulation: a comprehensive review”. Acta Geotec, vol. 18, pp. 6253–6274, 2023. https://doi.org/10.1007/s11440-023-01976-4
- K. Q. Li and Z. Y. Yin, “State of the Art of Coupled Thermo– hydro-Mechanical–Chemical Modelling for Frozen Soils”. Arch Computat Methods Eng, pp. 1-58, 2024. https://doi.org/10.1007/s11831-024-10164-w
- G. Angiulli, S. Calcagno, D. De Carlo, F. Laganá and M. Versaci, “Second-Order Parabolic Equation to Model, Analyze, and Forecast Thermal-Stress Distribution in Aircraft Plate Attack Wing–Fuselage”. Mathematics, vol. 8, no. 1, pp. 6, 2020. https://doi.org/10.3390/math8010006
- P. V. de Cassia Lima Pimenta and F. Marcondes, “Two-dimensional rate-independent plasticity using the element-based finite volume method”. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, pp. 1-16, 2019.
- P. Chen, J. Sun, C. Lin and W. Zhou, “Application of the finite volume method for geomechanics calculation and analysis on temperature dependent poromechanical stress and displacement fields in enhanced geothermal system”. Geothermics, vol. 95, pp. 102138, 2021.
- M. Liao, D. Liu and X. Zeng, “Novel Quadrature-Element Analysis of Plane Stress Elastoplasticity”. Journal of Engineering Mechanics, vol. 149, no. 8, pp. 04023048, 2023.
- A. V. Sadybekov and V. Katritch, “Computational approaches streamlining drug discovery”. Nature, vol. 616, no. 7958, pp. 673-685, 2023.
- K. Edfeldt, A. M. Edwards, O. Engkvist, J. Günther, M. Hartley, D. G. Hulcoop and M. Schapira, “A data science roadmap for open science organizations engaged in early-stage drug discovery”. Nature Communications, vol. 15, no. 1, pp. 5640, 2024.
- M. Santonico, A. Zompanti, A. Sabatini, L. Vollero, S. Grasso, C. Di Mezza and G. Pennazza, “CO2 and O2 Detection by Electric Field Sensors”. Sensors, vol. 20, pp. 668, 2020. https://doi.org/10.3390/s20030668
- M. Y. Rezk, J. Sharma and M. R. Gartia, “Nanomaterial-based CO2 sensors”. Nanomaterials, vol. 10, no. 11, pp. 2251, 2020.
- G. Pennazza, M. Santonico, A. Zompanti, F. R. Parente, G. Ferri and A. D’Amico, “Design and Development of an Electronic Interface for Gas Detection and Exhaled Breath Analysis in Liquids,” in IEEE Sensors Journal, vol. 18, no. 1, pp. 31-36, 1 Jan.1, 2018, doi: 10.1109/JSEN.2017.2771565.
- M. Lanza, A. Filippone, A. Ardizzone, G. Casili, I. Paterniti, E. Esposito and M. Campolo, “SCFA Treatment Alleviates Pathological Signs of Migraine and Related Intestinal Alterations in a Mouse Model of NTG-Induced Migraine”. Cells, vol. 10, pp. 2756, 2021. https://doi.org/10.3390/cells10102756
- D. Prattico, F. Laganá, G. Oliva, A. S. Fiorillo, S. A. Pullano, S. Calcagno, D. De Carlo and F. La Foresta, “Sensors and Integrated Electronic Circuits for Monitoring Machinery on Wastewater Treatment: Artificial Intelligence Approach”. In 2024 IEEE Sensors Applications Symposium (SAS), pp. 1-6, 2024. https://doi.org/10.1109/SAS60918.2024.10636531
- S. A. Pullano, G. Oliva, F. Lagana, A. S. Fiorillo, D. Prattico, P. Presta and G. Coppolino, “Development of a Wearable Device for Arteriovenous Fistula Monitoring”. In 2024 IEEE Sensors Applications Symposium (SAS), pp. 1-4, 2024. https://doi.org/10.1109/SAS60918.2024.10636446
- M. Menniti, F. Laganà, M. G. Bianco, G., Oliva, A. S. Fiorillo and S. A. Pullano, “Sensorized Non-Invasive Ventilator for Clinical Applications in Telemedicine”. In 2024 IEEE International Symposium on Medical Measurements and Applications (MeMeA), pp. 1-5, 2024. https://doi.org/10.1109/MeMeA60663.2024.10596712
- M. Alqahtani, A. M Alanazi, S. S. Algarni, H. Aljohani, F. K. Alenezi, T. F. Alotaibi, T. T. Ismaeil, “Unveiling the Influence of AI on Advancements in Respiratory Care: Narrative Review”. Interactive Journal of Medical Research, vol. 13, no. 1, pp. e57271, 2024