Model-free predictive current control of Syn-RM based on time delay estimation approach
References
- T. Hamiti, T. Lubin, L. Baghli, and A. Rezzoug, “Modeling of a synchronous reluctance machine accounting for space harmonics in view of torque ripple minimization,” Mathematics and Computers in Simulation, vol. 81, no. 2, pp. 354-366, 2010.
- G. H. B. Foo and X. Zhang, “Robust direct torque control of synchronous reluctance motor drives in the field-weakening region,” IEEE Transactions on Power Electronics, vol. 32, no. 2, pp. 1289-1298, 2017.
- H. Hadla and S. Cruz, “Predictive stator flux and load angle control of synchronous reluctance motor drives operating in a wide speed range,” IEEE Transactions on Industrial Electronics, vol. 64, no. 9, pp. 6950-6959, 2017.
- S. E. Lyshevski, “Nonlinear modeling and robust control of synchronous reluctance motors,” Energy Conversion and Management, vol. 43, no. 4, pp. 523-536, 2002.
- D. Igrec, A. Chowdhury, B. Štumberger, and A. Sarjaš, “Robust tracking system design for a synchronous reluctance motor – SynRM based on a new modified bat optimization algorithm,” Applied Soft Computing, vol. 69, pp. 568-584, 2018.
- L. Xu, X. Xu, T. Lipo, and D. Novotny, “Vector control of a synchronous reluctance motor including saturation and iron loss,” IEEE Transactions on Industry Applications, vol. 27, no. 5, pp. 977-985, 1991.
- T. Matsuo and T. Lipo, “Field oriented control of synchronous reluctance machine,” in Proceedings of IEEE Power Electronics Specialist Conference - PESC ’93, pp. 425-431, 1993.
- H. Hadla and F. Santos, “Performance comparison of field-oriented control, direct torque control, and model-predictive control for SynRMs,” Chinese Journal of Electrical Engineering, vol. 8, no. 1, pp. 24-37, 2022.
- C. Li, Q. Du, and X. Liu, “Indirect predictive torque control for switched reluctance motor in ev application,” Energy Reports, vol. 8, pp. 857-865, 2022.
- X. Zhang and G. H. B. Foo, “A robust field-weakening algorithm based on duty ratio regulation for direct torque controlled synchronous reluctance motor,” IEEE/ASME Transactions on Mechatronics, vol. 21, no. 2, pp. 765-773, 2016.
- R. Morales-Caporal and M. Pacas, “Encoderless predictive direct torque control for synchronous reluctance machines at very low and zero speed,” IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4408-4416, 2008.
- M. Rosic, B. Koprivica, and M. Bjekic, “Smart DTC algorithm with automatic torque ripple adjustment,” Journal of Electrical Engineering, vol. 73, no. 2, pp. 88-98, 2022.
- Y.-S. Choi, H. H. Choi, and J.-W. Jung, “Feedback linearization direct torque control with reduced torque and flux ripples for IPMSM drives,” IEEE Transactions on Power Electronics, vol. 31, no. 5, pp. 3728-3737, 2016.
- P. H. Truong, D. Flieller, N. K. Nguyen, J. Mercklé, and G. Sturtzer, “Torque ripple minimization in non-sinusoidal synchronous reluctance motors based on artificial neural networks,” Electric Power Systems Research, vol. 140, pp. 37-45, 2016.
- P. R. Ghosh, A. Das, and G. Bhuvaneswari, “Comparative analysis of sensorless DTC schemes for a synchronous reluctance motor drive,” in 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), pp. 1-5, 2018.
- T. A. Huynh, N.-D. Le, M.-F. Hsieh, and D.-K. Ngo, “A modified of DTC control applied to novel FI-PMASynRM for torque ripple reduction,” in 2019 IEEE 4th International Future Energy Electronics Conference (IFEEC), pp. 1-7, 2019.
- I. Hammoud, S. Hentzelt, T. Oehlschlaegel, and R. Kennel, “Learning-based model predictive current control for synchronous machines: An LSTM approach,” European Journal of Control, vol. 68, p. 100663, 2022. 2022 European Control Conference Special Issue.
- F. Morel, X. Lin-Shi, J.-M. Rétif, and B. Allard, “A predictive current control applied to a permanent magnet synchronous machine, comparison with a classical direct torque control,” Electric Power Systems Research, vol. 78, no. 8, pp. 1437-1447, 2008.
- T. Li, X. Sun, G. Lei, Y. Guo, Z. Yang, and J. Zhu, “Finite-control-set model predictive control of permanent magnet synchronous motor drive systems – An overview,” IEEE/CAA Journal of Automatica Sinica, vol. 9, no. 12, pp. 2087-2105, 2022.
- I. Hammoud, S. Hentzelt, K. Xu, T. Oehlschlägel, M. Abdelrahem, C. Hackl, and R. Kennel, “On continuous-set model predictive control of permanent magnet synchronous machines,” IEEE Transactions on Power Electronics, vol. 37, no. 9, pp. 10360-10371, 2022.
- S. Chai, L. Wang, and E. Rogers, “Model predictive control of a permanent magnet synchronous motor with experimental validation,” Control Engineering Practice, vol. 21, no. 11, pp. 1584-1593, 2013.
- C. Mai-Van, S. Duong-Minh, D. Tran-Huu, B. Binh-Pho, and P. Vu, “An improved method of model predictive current control for multilevel cascaded H-bridge inverters,” Journal of Electrical Engineering, vol. 72, no. 1, pp. 1-11, 2021.
- R. Antonello, M. Carraro, L. Peretti, and M. Zigliotto, “Hierarchical scaled-states direct predictive control of synchronous reluctance motor drives,” IEEE Transactions on Industrial Electronics, vol. 63, no. 8, pp. 5176-5185, 2016.
- Y. Zhang, J. Jin, and L. Huang, “Model-free predictive current control of PMSM drives based on extended state observer using ultralocal model,” IEEE Transactions on Industrial Electronics, vol. 68, no. 2, pp. 993-1003, 2021.
- L. Xu, G. Chen, and Q. Li, “Ultra-local model-free predictive current control based on nonlinear disturbance compensation for permanent magnet synchronous motor,” IEEE Access, vol. 8, pp. 127690-127699, 2020.
- S. Gao, Y. Wei, D. Zhang, H. Qi, Y. Wei, and Z. Yang, “Model-free hybrid parallel predictive speed control based on ultralocal model of PMSM for electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 69, no. 10, pp. 9739-9748, 2022.
- M. Lv, S. Gao, Y. Wei, D. Zhang, H. Qi, and Y. Wei, “Model-free parallel predictive torque control based on ultra-local model of permanent magnet synchronous machine,” Actuators, vol. 11, no. 2, 2022.
- H. Mesai Ahmed, I. Jlassi, A. J. Marques Cardoso, and A. Bentaallah, “Model-free predictive current control of synchronous reluctance motors based on a recurrent neural network,” IEEE Transactions on Industrial Electronics, vol. 69, no. 11, pp. 10984-10992, 2022.
- C.-K. Lin, T.-H. Liu, J.-t. Yu, L.-C. Fu, and C.-F. Hsiao, “Model-free predictive current control for interior permanent-magnet synchronous motor drives based on current difference detection technique,” IEEE Transactions on Industrial Electronics, vol. 61, no. 2, pp. 667-681, 2014.
- P. G. Carlet, F. Tinazzi, S. Bolognani, and M. Zigliotto, “An effective model-free predictive current control for synchronous reluctance motor drives,” IEEE Transactions on Industry Applications, vol. 55, no. 4, pp. 3781-3790, 2019.
- N. Yang, S. Zhang, X. Li, and X. Li, “A new model-free deadbeat predictive current control for PMSM using parameter-free Luenberger disturbance observer,” IEEE Journal of Emerging and Selected Topics in Power Electronics, pp. 1-1, 2022.
- Y. Yu, Z. Mi, X. Zheng, D. Chang, X. Zheng, and C. Sun, “Adaptive sliding mode backstepping control-based maximum torque per ampere control of permanent magnet-assisted synchronous reluctance motor via nonlinear disturbance observer,” Advances in Mechanical Engineering, vol. 10, no. 7, 2018, DOI: 10.1177/1687814018788750
- M. Fliess and C. Join, “Model-free control,” International Journal of Control, vol. 86, no. 12, pp. 2228-2252, 2013.
- J. Riccio, P. Karamanakos, S. Odhano, M. Tang, M. D. Nardo, and P. Zanchetta, “Direct model predictive control of synchronous reluctance motor drives,” IEEE Transactions on Industry Applications, pp. 1-10, 2022.
- G. I. Mustafa, H. Wang, and Y. Tian, “Vibration control of an active vehicle suspension systems using optimized model-free fuzzy logic controller based on time delay estimation,” Advances in Engineering Software, vol. 127, pp. 141-149, 2019.
Language: English
Page range: 344 - 356
Submitted on: May 17, 2023
Published on: Oct 21, 2023
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 6 times per year
Keywords:
Related subjects:
© 2023 Mohamed Essalih Boussouar, Abdelghani Chelihi, Khaled Yahia, Antonio J. Marques Cardoso, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.