References
- B. A. Munk, Frequency Selective Surfaces. New York: John Wiley & Sons, Ltd, 2000.
- P. Prasad, S. N. Singh, and A. Kumar, “Lightweight ultra-wideband antenna array equipped with thin frequency selective surface for high gain applications,” Journal of Electrical Engineering, vol. 73, no. 6, pp. 396–404, 2022.
- S. Monni, A. Neto, G. Gerini, F. Nennie, and A. Tijhuis, “Frequency selective surface to prevent interference between radar and satcom antennas,” IEEE Antennas and Wireless Propagation Letters, vol. 8, pp. 220–223, 2009.
- P. Taylor, A. Austin, E. Parker, M. Neve, J. Batchelor, J.-P. Yiin, M. Leung, G. Rowe, A. Williamson, and K. Sowerby, “Angular independent frequency selective surfaces for interference control in indoor wireless environments,” Electronics Letters, vol. 48, no. 2, pp. 61–62, 2012.
- B. Sanz-Izquierdo, J.-B. Robertson, E. A. Parker, and J. C. Batchelor, “Wideband FSS for electromagnetic architecture in buildings,” Applied Physics A, vol. 103, no. 3, pp. 771–774, 2011.
- G. H.-h. Sung, K. W. Sowerby, M. J. Neve, and A. G. Williamson, “A frequency-selective wall for interference reduction in wireless indoor environments,” IEEE Antennas and Propagation Magazine, vol. 48, no. 5, pp. 29–37, 2006.
- C.-N. Chiu and W.-Y. Wang, “A dual-frequency miniaturized-element FSS with closely located resonances,” IEEE Antennas and Wireless Propagation Letters, vol. 12, pp. 163–165, 2013.
- S. Çimen, “Novel closely spaced planar dual-band frequency-selective surface,” IET Microwaves, Antennas & Propagation, vol. 7, no. 11, pp. 894–899, 2013.
- H. Fabian-Gongora, A. E. Martynyuk, J. Rodriguez-Cuevas, and J. I. Martinez-Lopez, “Active dual-band frequency selective surfaces with close band spacing based on switchable ring slots,” IEEE Microwave and Wireless Components Letters, vol. 25, no. 9, pp. 606–608, 2015.
- M. Yan, J. Wang, H. Ma, S. Qu, J. Zhang, C. Xu, L. Zheng, and A. Zhang, “A quad-band frequency selective surface with highly selective characteristics,” IEEE Microwave and Wireless Components Letters, vol. 26, no. 8, pp. 562–564, 2016.
- S. Yadav, M. M. Sharma, and R. K. Singh, “A polarization insensitive tri-band bandpass frequency selective surface for Wi-MAX and WLAN applications”. Progress In Electromagnetics Research Letters, 101, pp.127-136, 2021.
- N. Liu, X. Sheng, C. Zhang, J. Fan, and D. Guo, “A miniaturized triband frequency selective surface based on convoluted design,” IEEE Antennas and Wireless Propagation Letters, vol. 16, pp. 2384–2387, 2017.
- B. Sanz-Izquierdo, E. A. Parker, and J. C. Batchelor, “Dual-band tunable screen using complementary split ring resonators,” IEEE Transactions on Antennas and Propagation, vol. 58, no. 11, pp. 3761–3765, 2010.
- C. Mias and C. Tsakonas, “Waveguide demonstration of varactor-diode tunable band-pass frequency-selective surface,” Microwave and Optical Technology Letters, vol. 45, no. 1, pp. 62–66, 2005.
- Y.-M. Yu, C.-N. Chiu, Y.-P. Chiou, and T.-L. Wu, “A novel 2.5-dimensional ultraminiaturized-element frequency selective surface,” IEEE Transactions on Antennas and Propagation, vol. 62, no. 7, pp. 3657–3663, 2014.
- M. Kartal, J. J. Golezani, and B. Doken, “A triple band frequency selective surface design for GSM systems by utilizing a novel synthetic resonator,” IEEE Transactions on Antennas and Propagation, vol. 65, no. 5, pp. 2724–2727, 2017.
- N. Choudhary, A. Sharma, and S. Yadav, “A novel band stop frequency selective surface for the security of quad band mobile applications,” in 2017 IEEE Applied Electromagnetics Conference (AEMC), 2017, pp. 1–2.
- B. Rahmati and H. R. Hassani, “Multiband metallic frequency selective surface with wide range of band ratio,” IEEE Transactions on Antennas and Propagation, vol. 63, no. 8, pp. 3747–3753, 2015.
- R. A. Mellita, S. S. Karthikeyan, P. Damodharan, and D. S. Chandu, “A miniaturized quad-band frequency selective surface for c-band applications,” Journal of Electromagnetic Waves and Applications, vol. 35, no. 14, pp. 1882–1893, 2021.
- A. Dey and R. Sanyal, “Single layer miniaturized ultra-thin FSS with five closely spaced bands,” International Journal of Microwave and Wireless Technologies, vol. 11, no. 8, p. 797–805, 2019.
- S. Yadav, C. P. Jain, and M. M. Sharma, “Smartphone frequency shielding with penta-bandstop FSS for security and electromagnetic health applications,” IEEE Transactions on Electromagnetic Compatibility, vol. 61, no. 3, pp. 887–892, 2019.
- A. Ghosh, M. Kumar, S. N. Islam, and S. Das, “Design and analysis of a compact penta-band polarization-insensitive bandstop frequency selective surface,” IEEE Antennas and Wireless Propagation Letters, vol. 19, no. 1, pp. 59–63, 2020.
- U. Farooq, A. Iftikhar, M. F. Shafique, M. J. Mughal, A. Fida, and S. Khalid, “Polarization insensitive penta-bandstop frequency selective surface for closely placed bands,” Microwave and Optical Technology Letters, vol. 63, no. 1, pp. 271–278, 2021.
- L. Martinez-Lopez, R. Martinez-Lopez, A. E. Martynyuk, J. Rodriguez-Cuevas, H. Fabian-Gongora, and J. I. Martinez-Lopez, “Close band spacing pentaband frequency selective surfaces based on concentric ring slots,” IEEE Access, vol. 9, pp. 57 886–57 896, 2021.