References
- K. Ramu, Permanent Magnet Synchronous and Brushless DC Motor Drives. Boca Raton, Florida, USA: CRC Press, 2017.
- A. Mansouri, “Conception et optimisation multi-objectifs d’un moteur a aimants permanents destine pour un vehicule electrique,” Ph.D. dissertation, University of Gafsa, Tunisia, 2016.
- C. Qiping, L. Chuanjie, O. Aiguo, L. Xiangqin, and X. Qiang, “Research and development of in-wheel motor driving technology for electric vehicles,” International Journal of Electric and Hybrid Vehicles, vol. 8, no. 3, pp. 242–254, 2016. [Online]. Available: https://doi.org/10.1504/IJEHV.2016.080024
- B. Esra Kandemir, “Electrical equivalent circuit for modelling permanent magnet synchronous motors,” Journal of Electrical Engineering, vol. 72, no. 3, pp. 176–183, 2021. [Online]. Available: https://doi.org/10.2478/jee-2021-0024
- M. Mohd Rezal and I. Dahaman, “Optimization of surface-mounted permanent magnet brushless ac motor using analytical model and differential evolution algorithm,” Journal of Electrical Engineering, vol. 70, no. 3, pp. 208–217, 2019. [Online]. Available: https://doi.org/10.2478/jee-2019-0029
- S. Xiaodong, S. Zhou, C. Yingfeng, L. Gang, G. Youguang, and Z. Jianguo, “Driving-cycle-oriented design optimization of a permanent magnet hub motor drive system for a four-wheel-drive electric vehicle,” IEEE Transactions on Transportation Electrification, vol. 6, no. 3, pp. 1115–1125, 2020. [Online]. Available: https://doi.org/10.1109/TTE.2020.3009396
- Z. Zhiwei, “A Compact High Torque Density Dual Rotor Permanent Magnet In-Wheel Motor With Toroidal Windings,” in Proceedings of the 22nd International Conference on Electrical Machines and Systems, ser. ICEMS. Harbin, China: IEEE, 2019, pp. 1–5.
- G. Si, G. Hong, and X. Jinquan, “Design and Comparison of Six-Phase Fault-Tolerant Interior Permanent Magnet Motor and Surface-Mounted Permanent Magnet Motor for Electric Vehicles,” in Proceedings of the 21st International Conference on Electrical Machines and Systems, ser. ICEMS. Jeju, South Korea: IEEE, 2018, pp. 120–125.
- F. Yaojing, L. Fang, H. Shoudao, and Y. Ning, “Variable flux outer-rotor permanent magnet synchronous motor for in-wheel direct-drive applications,” Chinese Journal of Electrical Engineering, vol. 4, no. 1, pp. 28–35, 2018. [Online]. Available: https://doi.org/10.23919/CJEE.2018.8327368
- G. Peng, G. Yuxi, and W. Xiaoyuan, “The design of a permanent magnet in-wheel motor with dual-stator and dual-field-excitation used in electric vehicles,” Energies, vol. 11, no. 2, pp. 2–13, 2018. [Online]. Available: https://doi.org/10.3390/en11020424
- R. Akinci and M. Polat, “Design and Optimization with Genetic Algorithm of Double Rotor Axial Flux Permanent Magnet Synchronous Motor (TORUS Type) for Electrical Vehicles,” In proceeding of the 2019 4th International Conference on Power Electronics and their Applications (ICPEA). IEEE. Elazig, Turkey, 2019.
- P. P. C. Bhagubai, J. G. Sarrico, J. F. P. Fernandes and P. J. Costa Branco, “Design, multi-objective optimization, and prototyping of a 20 kW 8000 rpm permanent magnet synchronous motor for a competition electric vehicle,” Energies, vol. 13, no. 10, P. 2465, 2020. [Online]. Available: https://doi.org/10.3390/en13102465
- Q. Wang, P. Zhao, X. Du, F. Lin and X. Li, “Electromagnetic Vibration Analysis and Slot–Pole Structural Optimization for a Novel Integrated Permanent Magnet In-Wheel Motor,” Energies, vol. 13, no. 13, p. 3488, 2020. [Online]. Available: https://doi.org/10.3390/en13133488
- Ö. Dal, M.Yıldırım, and H. Kürüm, “Optimization of permanent magnet synchronous motor design by using PSO,” In 2019 4th International Conference on Power Electronics and their Applications (ICPEA). IEEE. Elazig, Turkey, 2019.
- L. Zaaraoui, A. Mansouri, and N. Smairi, “Design and optimization of an in-wheel unequal stator teeth motor,” International Journal of Renewable Energy Research, vol. 12, no. 1, pp. 284–293, 2022. [Online]. Available: https://doi.org/10.20508/ijrer.v12i1.12723.g8397
- L. Florence, “Design, optimization and comparison of permanent magnet motors for a low-speed direct-driven mixer,” Ph.D. dissertation, Royal Institute of Technology, Stockholm Sweden, 2004.
- L. Zaaraoui, “Elaboration d’une nouvelle métaheuristique en vue de la conception optimale d’un moteur électrique,” Ph.D. dissertation, University of Gabes, Gabes, 2022.
- V. Sarac, “Performance optimization of permanent magnet synchronous motor by cogging torque reduction,” Journal of Electrical Engineering, vol. 70, no. 3, pp. 218–226, 2019. [Online]. Available: https://doi.org/10.2478/jee-2019-0030
- F. Yan-li and Z. Cheng-ning, “Analytical calculation for predicting the air gap flux density in surface mounted permanent magnet synchronous machine,” Journal of Electrical Engineering and Technology, vol. 65, no. 6, pp. 769–777, 2017. [Online]. Available: https://doi.org/10.5370/JEET.2017.12.2.769
- M. T. Kakhki, “Modeling of losses in a permanent magnet machine fed by a pwm supply,” Ph.D. dissertation, Laval University, Quebec, Canada, 2016.
- N. Antonio J., L. Francisco, A. Enrique, D. Bernabe, D. Juan J., and B. Andreas, “Abyss: Adapting scatter search to multiobjective optimization,” IEEE Transactions on Evolutionary Computation, vol. 12, no. 4, pp. 439–457, 2008. [Online]. Available: https://doi.org/10.1109/TEVC.2007.913109
- E. Zitzler, M. Laumanns, and L. Thiele, “SPEA2: Improving the Strength Pareto Evolutionary Algorithm,” in Proceedings of the EUROGEN Conference, Greece, 2001, pp. 95–100.
- D. Kalyanmoy, P. Amrit, A. Sameer, and T. Meyarivan, “A fast and elitist multiobjective genetic algorithm: Nsga-II,” IEEE Transactions on Evolutionary Computation, vol. 6, no. 2, pp. 182–197, 2002. [Online]. Available: https://doi.org/10.1109/4235.996017
- N. Antonio J., D. Juan J., L. Francisco, D. Bernabe, and A. Enrique, “Mocell: A cellular genetic algorithm for multiobjective optimization,” International Journal of Intelligent Systems, vol. 24, no. 7, pp. 726–746, 2009. [Online]. Available: https://doi.org/10.1002/int.20358
- L. Zaaraoui, A. Mansouri, and N. Smairi, “Nmopso: an improved multiobjective pso algorithm for permanent magnet design,” Scientific Bulletin Series C: Electrical Engineering and Computer Science, vol. 84, no. 1, pp. 201–214, 2022. [Online]. Available: https://www.scientificbulletin.upb.ro/rev_docs_arhiva/fullfec_321988.pdf
- D. Kalyanmoy and J. Himanshu, “An evolutionary many-objective optimization algorithm using reference point based non-dominated sorting approach, part i: Solving problems with box constraints,” IEEE Transactions on Evolutionary Computation, vol. 18, no. 4, pp. 577–601, 2014. [Online]. Available: https://doi.org/10.1109/TEVC.2013.2281535
- R. S. Margarita and C. C. Carlos A., “Improving PSO based Multi-Objective Optimization using Crowding, Mutation and e –Dominance,” in Proceedings of the 3rd International Conference on Evolutionary Multi-Criterion Optimization, ser. EMO 2005. Mexico: Springer, 2005, pp. 505–519.
- A. Nebro, J. J. Durillo, J. G. Nieto, C. A. Coelle, F. Luna, and E. Alba, “SMPSO: A New PSO-based Metaheuristic for Multi-objective Optimization,” in Proceedings of the 2009 IEEE Symposium on Computational Intelligence in Multi-Criteria Decision-Making, ser. MCDM. USA: Nashville, TN, USA, 2009, pp. 66–73.
- R. Islam, I. Husain, A. Fardoun, and K. McLaughlin, “Permanent-Magnet Synchronous Motor Magnet Designs With Skewing for Torque Ripple and Cogging Torque Reduction,” IEEE Transactions on Industry Applications, vol. 45, no. 1, pp. 152-160, 2009. [Online]. Available: https://doi.org/10.1109/TIA.2008.2009653
- H. Msaddek, A. Mansouri, and H. Trabelsi, “Optimal design and cogging torque minimization of a permanent magnet motor for an electric vehicle,” Technical Gazette, vol. 30, no. 2, pp. 538–544, 2023. [Online]. Available: https://doi.org/10.17559/TV-20220815140808