Have a personal or library account? Click to login
Performance analysis of various rotor topologies of surface PM synchronous motor Cover

Performance analysis of various rotor topologies of surface PM synchronous motor

Journal of Electrical Engineering
Volume 74 (2023): Issue 2 (April 2023)
By: Vasilija Sarac  
Open Access
|May 2023

References

  1. K. Yamano, S. Morimoto, M. Sanada, and Y. Inoue,“Design of Surface Permanent Magnet Synchronous Motor Using Design Assist System for PMSM”, IEEJ Journal of Industry Application, vol. 6, no. 6. pp. 409-415, DOI: 10.1541/ieejjia.6.409, 2017.
    Open DOISearch in Google ScholarBack to article
  2. X. Ba, Z. Gong, Y. Guo, C. Zhang, and J. Zhu,“Development of Equivalent Circuit Models of Permanent Magnet Synchronous Motors Considering Core Loss”, Energies, vol. 15, no. 6, https://doi.org/10.3390/en15061995, 2022.
    Search in Google ScholarBack to article
  3. E. K. Beser,“Electrical equivalent circuit for modeling permanent magnet synchronous motors”, Journal of Electrical Engineering, vol. 72, no. 3. pp. 176-183, https://doi.org/10.2478/jee-2021-0024, 2021.
    Search in Google ScholarBack to article
  4. S. Mabrak, S. Chakroune, and D. Khodija,“Analytical Model of Slotted Surface Mounted Permanent Magnet Synchrnous Motors with Non-magnetic Rotor Core”, Modeling, Measurement and Control, A, vol. 92, no. 2-4. pp. 60-66, https://doi.org/10.18280/mmc_a.922-404, 2019.
    Search in Google ScholarBack to article
  5. B.Slusarek,D.Kapelski,L.Antal,P.Zalas,andM.Gwodziewicz, “Synchronous Motor with Hybrid Permanent Magnets on the Rotor”, Sensors, vol. 14, https://doi.org/10.3390%2Fs140712425, 2014.
    Search in Google ScholarBack to article
  6. F. Pop-Piglesan, F. Jurca, C. Oprea, and C. Martis,“Permanent magnet synchronous machine design for low-noise drive systems”, Proceedings of ISMA2014 including USD2014, pp. 1387 -1400, 2014.
    Search in Google ScholarBack to article
  7. G. Verez, G. Barakat, Y. Amara, and G. Hoblos,“Impact of Pole and Slot Combination on Vibrations and Noise of Electromagnetics Origins in Permanent Magnet Synchronous Motors”, IEEE Transactions on Magnetics, vol. 51, no. 3, https://doi.org/10.1109/TMAG.2014.2354019, 2015.
    Search in Google ScholarBack to article
  8. Y. Liu, Zi-Qiang Zhu, C. Gan, S. Brockway, and C. Hilton,“Comparison of optimal slot/pole number combinations of fractional slot permanent magnet synchronous machines having similar slot and pole numbers”, The Journal of Engineering, no. 17. pp. 4585-4589, https://doi.org/10.1049/joe.2018.8202, 2019.
    Search in Google ScholarBack to article
  9. M. Fakam, M. Hecquet, V. Lanfranchi, and A. Randria,“Design and magnetic noise reduction of the Surface Permanent Magnet Synchronous Machine using complex air gap permeance”, IEEE Transactions on Magnetics, vol. 51, no. 4, 2015, pp. 8103809, DOI; 10.1109/TMAG., 2360315, 2014.
    Search in Google ScholarBack to article
  10. J. Si, S. Zhao, L. Zhang, R. Cao, and W. Cao,“The Characteristics Analysis and Cogging Torque Optimization of a Surface-Interior Permanent Magnet Synchronous Motor”, Chinese Journal of Electrical Engineering, vol. 4, no. 4. pp. 41-47, https://doi.org/10.23919/CJEE.2018.8606788, 2018.
    Search in Google ScholarBack to article
  11. Z. Q. Zhu,“Influence of Design Parameters on Cogging Torque in Permanent Magnet Machines”, IEEE Transactions on Energy Conversion, vol. 15, no. 4. pp. 407-412, https://doi.org/10.1109/60.900501, 2000.
    Search in Google ScholarBack to article
  12. I. M. Garcia-Garcia,Á. J. Romero, J.H.Ciudad, and S.M. Arroyo,“Cogging Torque Reduction Based on a New Pre-Slot Technique for a Small Wind Generator”, Energies, vol. 11. 3219, https://doi.org/10.3390/en11113219, 2018.
    Search in Google ScholarBack to article
  13. N. Chen, S. L. Ho, and W. N. Fu,“Optimization of Permanent Magnet Surface Shapes of Electric Motors for Minimization of Cogging Torque Using FEM”, IEEE Transactions on Magnetics, vol. 46 no. 6. pp. 2478-2481, http://dx.doi.org/10.1109/TMAG.2010.2044764, 2010.
    Search in Google ScholarBack to article
  14. F. Scuiller,“Magnet Shape Optimization to Reduce Pulsating Torque for a Five-Phase Permanent-Magnet Low-Speed Machine”, IEEE Transactions on Magnetics, vol. 50, no. 4. pp. 1-9, https://doi.org/10.1109/TMAG.2013.2287855, 2014.
    Search in Google ScholarBack to article
  15. C.-S. Lee, K.-S. Cha, J.-C. Park, and M.-S. Lim,“Tolerance-Insensitive Design of Magnet Shape for a Surface Permanent Magnet Synchronous Motor”, Energies, vol. 13, 1311, https://doi.org/10.3390/en13061311, 2020.
    Search in Google ScholarBack to article
  16. M. Aydin, O. Ocak, and Y. Demir,“Influence of varying magnet pole-arcs and step-skew on permanent magnet AC synchronous motor performance”, Turkish Journal of Electrical Engineering & Computer Science, vol. 28. pp. 3304-3318, https://doi.org/10.3906/elk-2003-179, 2020.
    Search in Google ScholarBack to article
  17. Y. L. Karnavas, I.D. Chasiotis, and E.L. Peponakis,“Permanent Magnet Synchronous Motor Design Using Grey Wolf Optimizer Algorithm”, International Journal of Electrical and Computer Engineering, vol. 6, no. 3. pp. 1353-1362, http://doi.org/10.11591/ijece.v6i3.pp1353-1362, 2016.
    Search in Google ScholarBack to article
  18. W. Purwanto, Risfendra, D. Fernandez, D. S. Putra, and T. Sugiarto,“Design and Comparison of five Topologies Rotor Permanent Magnet Synchronous Motor for High-Speed Spindle Applications”, International Journal of GEOMATE, vol. 13, no. 40. pp. 148-154, https://doi.org/10.21660/2017.40.02765, 2017.
    Search in Google ScholarBack to article
  19. R. Neji, S. Tounski, and F. Sellami,“Contribution to the definition of a permanent magnet motor with reduced production cost for the electrical vehicle propulsion”, European Transactions on Electrical Power, vol. 16. pp. 437-460, http://dx.doi.org/10.1002/etep.95, 2006.
    Search in Google ScholarBack to article
  20. G. Pellegrino, A. Vagati, B. Boazzo, and P. Gugliemi, “Comparison of Induction and PM Synchronous motor drives for EV application including design examples”, IEEE Transactions on Industry Application, vol. 48, no. 6. pp. 2322-2332, http://dx.doi.org/10.1109/TIA.2012.2227092, 2012.
    Search in Google ScholarBack to article
  21. B.-H. Lee, H.-I. Park, and J.-W. Jung,“Design of Surface-Mounted Permanent Magnet synchronous Motor Considering Axial Leakage Flux by using 2-Dimensional Finite Element Analysis”, Journal of Electrical Engineering & Technology, vol. 13, no. 6. pp. 2284-2291, https://doi.org/10.5370/JEET.2018.13.6.2284, 2018.
    Search in Google ScholarBack to article
  22. M. Korkosz and G. Podskarbi,“Laboratory Test of Surface Mounted Permanent Magnet Brushless Motor”, Technical Transactions Electrical Engineering, 3-E. pp. 185-195, DOI: 10.4467/23 53737XCT.16.276.6075, 2016.
    Search in Google ScholarBack to article
  23. L. Antal and P. Zalas,“Soft and synchronous starting of low-power SMPMSM motor”, Przegld Elektrotechniczny, vol. 89, nr. 2b/2013. pp. 173-176, 2012.
    Search in Google ScholarBack to article
  24. “Koncar-Mes”, Available online, https://koncar-mes.hr/wp-content/uploads/2020/08/Electric-motors.pdf (accessed on 01 February 2023).
    Search in Google ScholarBack to article
  25. V. Sarac,“Design Optimization of Induction Motor for Efficiency and Reliability Improvement”, 30th International Conference on Organization and Technology of Maintenance OTO 2021, Lecture Notes in Networks and Systems, vol. 369 pp. 35-49, Springer, Cham, https://doi.org/10.1007/978-3-030-92851-33, 2021.
    Search in Google ScholarBack to article
  26. Ansys Inc. Maxwell 2D Users Guide 2010, Ansys Inc.: Canons-burg, PA, USA, 2020.
    Search in Google ScholarBack to article
  27. “OME Motors”, Available online, https://www.omemotors.es/media/catalogo/es/OMPM%20CATALOGUE.pdf (Accessed on 01 February 2023).
    Search in Google ScholarBack to article
  28. Mathworks, Available online, https://www.mathworks.com/help/sps/ug/permanent-magnet-synchronous-machine.html (Acces sed on 03 February 2023).
    Search in Google ScholarBack to article
  29. C. Ocak, I. Tarimer, A. Dalcali, and D. Uygun,“Investigation Effects of Narrowing Rotor Pole Embrace to Efficiency and Cogging Torque at PM BLDC Motor”, TEM Journal, vol. 5, no. 1. pp. 25-31, https://dx.doi.org/10.18421/TEM51-04, 2016.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/jee-2023-0011 | Journal eISSN: 1339-309X | Journal ISSN: 1335-3632
Journal RSS Feed
Language: English
Page range: 85 - 94
Submitted on: Jan 24, 2023
|
Published on: May 8, 2023
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 6 issues per year
Keywords:
surface mounted permanent magnet motor,
efficiency,
cogging torque,
magnetic flux density distribution,
transient characteristics
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2023 Vasilija Sarac, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 74 (2023): Issue 2 (April 2023)Next article