New application of the key term separation principle

Jozef Vörös

doi:10.2478/jee-2022-0060

.blurhash-client-img { display: none !important; }

New application of the key term separation principle

Journal of Electrical Engineering

Volume 73 (2022): Issue 6 (December 2022)

By: Jozef Vörös

Open Access

|Dec 2022

Abstract

The paper deals with a new application of the key term separation principle in identification of nonlinear dynamic systems. A multiplicative form of this operator decomposition technique is proposed and applied to the Wiener model. The resulting mathematical model is linear in both the linear and the nonlinear block parameters. Illustrative examples are included.

References

[1] J. Vörös, “Identification of nonlinear dynamic systems using extended Hammerstein and Wiener models”, Control-Theory and Advanced Technology, vol. 10, no. 4, pp. 1203-1212, 1995.
Search in Google Scholar Back to article
[2] J. Vörös, “Iterative algorithm for parameter identification of Hammerstein systems with two-segment nonlinearities”, IEEE Trans. Automatic Control, vol. 44, no. 11, pp. 2145-2149, 1999.10.1109/9.802933
Search in Google Scholar Back to article
[3] J. Vörös, “Modeling and identification of hysteresis using special forms of the Coleman-Hodgdon model”, J. Electrical Engineering, vol. 60, no. 2, 2009, pp. 100-105, 2009.
Search in Google Scholar Back to article
[4] J. Li and F. Ding, “Maximum likelihood stochastic gradient estimation for Hammerstein systems with colored noise based on the key term separation technique”, Computers and Mathematics with Applications, vol. 62, no. 11, pp. 4170-4177, 2011.10.1016/j.camwa.2011.09.067
Search in Google Scholar Back to article
[5] H. Chen, Y. Xiao, and F. Ding, “Hierarchical gradient parameter estimation algorithm for Hammerstein nonlinear systems using the key term separation principle”, Applied Mathematics and Computation, vol. 247, pp. 1202-1210, 2014.10.1016/j.amc.2014.09.070
Search in Google Scholar Back to article
[6] H. Chen, F. Ding, and Y. Xiao, “Decomposition-based least squares parameter estimation algorithm for input nonlinear systems using the key term separation technique”, Nonlinear Dynamics, vol. 79, no. 3, pp. 2027-2035, 2015.10.1007/s11071-014-1791-5
Search in Google Scholar Back to article
[7] X. Wang, F. Ding, T. Hayat, and A. Alsaedi, “Combined state and multi-innovation parameter estimation for an input non-linear state-space system using the key term separation”, IET Control Theory & Applications, vol. 10, no. 13, pp. 1503-1512, 2016.10.1049/iet-cta.2015.1056
Search in Google Scholar Back to article
[8] J. Ma and F. Ding, “Filtering-Based Multistage Recursive Identification Algorithm for an Input Nonlinear Output-Error Autoregressive System by Using the Key Term Separation Technique”, Circuits, Systems, and Signal Processing, vol. 36, no. 2, pp. 577-599, 2017.10.1007/s00034-016-0333-4
Search in Google Scholar Back to article
[9] F. Ding, H. Chen, L. Xu, J. Dai, Q. Li, and T. Hayat, “A hierarchical least squares identification algorithm for Hammerstein nonlinear systems using the key term separation”, Journal of the Franklin Institute, vol. 355, no. 8, pp. 3737-3752, 2018.10.1016/j.jfranklin.2018.01.052
Search in Google Scholar Back to article
[10] J. Ma, Q. Fei, and W. Xiong, “Sliding Window Iterative Identification of Systems with Asymmetric Preload Nonlinearity Based on the Key Term Separation”, IEEE Access, vol. 7, pp. 36633-36641, 2019.10.1109/ACCESS.2019.2904096
Search in Google Scholar Back to article
[11] Y. Ji, C. Zhang, Z. Kang, and T. Yu, “Parameter estimation for block-oriented nonlinear systems using the key term separation”, International Journal of Robust and Nonlinear Control, vol. 30, no. 9, pp. 3727-3752, 2020.10.1002/rnc.4961
Search in Google Scholar Back to article
[12] J. Wang, Y. Ji, and C. Zhang, “Iterative parameter and order identification for fractional-order nonlinear finite impulse response systems using the key term separation”, Int. Journal of Adaptive Control and Signal Processing, vol. 35, no. 8, pp. 1562-1577, 2021.10.1002/acs.3257
Search in Google Scholar Back to article
[13] J. Vörös, “Parameter identification of Wiener systems with discontinuous nonlinearities”, Systems & Control Letters, vol. 44, no. 5, pp. 363-372, 2001.10.1016/S0167-6911(01)00155-4
Search in Google Scholar Back to article
[14] J. Vörös, “Modeling and identification of Wiener systems with two-segment nonlinearities”, IEEE Trans. Control Systems Technology, vol. 11, no. 2, pp. 253-257, 2003.10.1109/TCST.2003.809238
Search in Google Scholar Back to article
[15] J. Vörös, “A new approach to Wiener model parameter estimation,”, 5th Int. Conf. Process Control 2002, Kouty nad Desnou, Czech Republik, 2002.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/jee-2022-0060 | Journal eISSN: 1339-309X | Journal ISSN: 1335-3632

Journal RSS Feed

Language: English

Page range: 437 - 441

Submitted on: Oct 17, 2022

Published on: Dec 24, 2022

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 6 issues per year

Keywords:

nonlinear systems,

identification,

key term separation principle,

Wiener model

Related subjects:

Engineering,

Introductions and overviews,

Engineering, other

© 2022 Jozef Vörös, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 73 (2022): Issue 6 (December 2022)