References
- [1] T. Tudorache and M. Popescu, “Optimal Design Solutions for Permanent Magnet Synchronous Machines”, Advances in Electrical and Computer Engineering, vol. 11, no. 4, pp. 77-82, 2011.
- [2] T. Ishikawa, Y. Seki, and N. Kurita, “Analysis for Fault Detection of Vector-Controlled Permanent Magnet Synchronous Motor with Permanent Magnet Defect”, IEEE Transactions on Magnetics, vol, . 49, no. 5, pp. 2331-2334, 2013.
- [3] M Kazerooni, S. Hamidifar, and N. C. Kar, “Analytical Modelling and Parametric Sensitivity Analysis for the PMSM Steady-State Performance Prediction”, IET Electric Power Applications, vol. 7, no. 7, pp. 586-596, 2013.
- [4] P. Pillay and R. Krishnan, “Modeling, Simulation, and Analysis of Permanent-Magnet Motor Drives, Part I: The Permanent-Magnet Synchronous Motor Drive”, IEEE Transactions on Industry Applications, vol. 25, no. 2, pp. 265-273, 1989.
- [5] A. N. Tiwari, P. Agarwal, and S. P. Srivastava, “Performance Investigation of Modified Hysteresis Current Controller with the Permanent Magnet Synchronous Motor Drive”, IET Electric Power Applications, vol. 4, no. 2, pp. 101-108, 2010.
- [6] P. Brandstetter and T. Krecek, “Speed and Current Control of Permanent Magnet Synchronous Motor Drive Using IMC Controllers”, Advances in Electrical and Computer Engineering, vol. 12, no. 4, pp. 3-10, 2012.
- [7] T. -T. Liu, Y. Tan, G. Wu, and S.-M. Wang, “Simulation of PMSM Vector Control System Based on Matlab/Simulink”, International Conference on Measuring Technology and Mechatronics Automation, Hunan, pp. 343-346, 2009.
- [8] C. Ogbuka, C. Nwosu, and M. Agu, “A Fast Hysteresis Current-Controlled Permanent Magnet Synchronous Motor Drive Based on Field Orientation”, Journal of Electrical Engineering, vol. 67, no. 2, pp. 69-77, 2016.
- [9] M. Tarnik and J. Murgas, “Model Reference Adaptive Control of Permanent Magnet Synchronous Motor”, Journal of Electrical Engineering, vol. 62, no. 3, pp. 117-125, 2011.
- [10] T. Herold, D. Franck, E. Lange, and K. Hameyer, “Extension of a d−q Model of a Permanent Magnet Excited Synchronous Machine by Including Saturation, Cross-Coupling and Slotting Effects”, IEEE International Electric Machines & Drives Conference (IEMDC), Ontario, pp. 1363-1367, 2011.
- [11] L. Zhong, M. F. Rahman, W. Y. Hu, and K. W. Lim, “Analysis of Direct Torque Control in Permanent Magnet Synchronous Motor Drives”, IEEE Transactions on Power Electronics, vol. 12, no. 3, pp. 528-536, 1997.
- [12] H. Kaimori, N. Nakao, T. Sakaue, and K. Akatsu, “Behavior Modeling of Permanent Magnet Synchronous Motors Using Flux Linkages for Coupling with Circuit Simulation”, International Conference on Electrical Machines (ICEM), Berlin, pp. 2695-2701, 2014.
- [13] B. Boazzo and G. Pellegrino, “Model-Based Direct Flux Vector Control of Permanent-Magnet Synchronous Motor Drives”, IEEE Transactions on Industry Applications, vol. 51, no. 4, pp. 3126-3136, 2015.
- [14] Y. Zhang, D. Xu, J. Liu, S. Gao, and W. Xu, “Performance Improvement of Model-Predictive Current Control of Permanent Magnet Synchronous Motor Drives” IEEE Transactions on Industry Applications, vol. 53, no. 4, pp. 3683-3695, 2017.
- [15] M. Aleenejad, H. Mahmoudi, and R. Ahmadi, “A New Modulated Model Predictive Control for Permanent Magnet Synchronous Motor”, IEEE Power and Energy Conference at Illinois (PECI), Illionis, , 2017.
- [16] S. -T. Lee and J. Hur, “Simplified Equivalent Model of PMSM for Analyzing Influence of Inter-Turn Fault on Motor Characteristics”, IEEE International Electric Machines and Drives Conference (IEMDC), Florida, 2017.
- [17] S.-T. Lee and J. Hur, “Simplified Equivalent Model of PMSM with Inter-Turn Fault”, IEEE Energy Conversion Congress and Exposition, Ohio, pp. 2427-2432, 2017.
- [18] S.-T. Lee and J. Hur, “Simplified Equivalent Model of PMSM with Inter-Turn Fault”, IEEE Transactions on Industry Applications, vol. 55, no. 3, pp. 2629-2636, 2019.
- [19] X. Yin and Y. Wang, “Permanent Magnet Synchronous Motor Emulator”, 43 rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, pp. 4160-4164, 2017.
- [20] X. Li, D. Xi, and Y. Zhang, “PMSM Simulation Model and System Test Based on TMS320F28035”, IEEE 9 th International Conference on Communication Software and Networks (ICCSN), Guangzhou, pp. 1507-1511, 2017.
- [21] J. Zhang, H. Yang, T. Wang, L. Li, D. G. Dorrell, and D. D.-C. Lu, “Field-Oriented Control Based on Hysteresis Band Current Controller for a Permanent Magnet Synchronous Motor Driven by a Direct Matrix Converter”, IET Power Electronics, vol. 11, no. 7, pp. 1277-1285, 2018.
- [22] J. Laksar, K. Hruska, and L. Veg, “Influence of Machine Geometry to the PMSM Mathematical Model”, International Conference on Electrical Drives & Power Electronics (EDPE), Slovakia, pp. 367-372, 2019.
- [23] H. Y. Kürüm, E. Öksüztepe, and E. Akin, “Estimation of Parameters for Surface Mounted Permanent Magnet Synchronous Motors”, 4 th International Conference on Power Electronics and their Applications (ICPEA), Turkey, 2019.
- [24] A. B. Dehkordi, A. M. Gole, and T. L. Maguire, “Permanent Magnet Synchronous Machine Model for Real-Time Simulation”, International Conference on Power Systems Transients (IPST05), Montreal, 2005.
- [25] J.-W. Jung, J.-J. Lee, S.-O. Kwon, J.-P. Hong, and K.-N. Kim, “Equivalent Circuit Analysis of Interior Permanent Magnet Synchronous Motor Considering Magnetic Saturation”, World Electric Vehicle Journal, vol. 3, pp. 114-118, 2009.
- [26] A. B. Yildiz, “Electrical Equivalent Circuit Based Modeling and Analysis of Direct Current Motors”, International Journal of Electrical Power and Energy Systems, vol. 43, no. 1, pp. 1043-1047, 2012.
- [27] M. Ridwan, M. N. Yuniarto, and Soedibyo, “Electrical Equivalent Circuit Based Modeling and Analysis of Brushless Direct Current (BLDC) Motor”, International Seminar on Intelligent Technology and Its Application (ISITIA), Indonesia, pp. 471-478, 2016.