References
- [1] T. K. Teodor, S. Singh, D. M. Bishop, O. Gunawan, Y. S. Lee, T. S. Gershon, K. W. Brew, P. D. Antunez, and R. Haight, “Ultrathin high band gap solar cells with improved efficiencies from the worlds oldest photovoltaic material”, Nat. Commun., vol. 8, no. 1, pp. 682, Sep. 2017, doi: 10.1038/s41467-017-00582-9.10.1038/s41467-017-00582-9561303328947765
- [2] S. Almosni et al, “Material challenges for solar cells in the twenty-first century: directions in emerging technologies”, Sci. Technol. Adv. Mater.,, vol. 19, no. 1, pp. 336-369., Apr. 2018, doi: 10.1080/14686996.2018.1433439.10.1080/14686996.2018.1433439591743629707072
- [3] P. Colter, B. Hagar, and S. Bedair, “Tunnel Junctions for III-V Multijunction Solar Cells Review” Crystals, vol. 8, no. 12, pp. 445-459, Nov. 2018, doi: 10.3390/cryst8120445.10.3390/cryst8120445
- [4] M. Ochoa, E. Barrigon, L. Barrutia, I. Garcia, I. Rey-Stolle, and C. Algora, “Limiting factors on the semiconductor structure of III-V multijunction solar cells for ultra-high concentration (1000-5000 suns): Limiting factors of multijunction solar cells for ultra-high concentration”, Prog. Photovolt., vol. 24, no. 10, pp. 1332-1345, Jun. 2016, doi: 10.1002/pip.2791.10.1002/pip.2791
- [5] G. A. Landis, “Selenium interlayer for high-efficiency multijunction solar cell”, US patent US9418844B1, Aug. 16, 2016.
- [6] E. E. Perl, J. Simon, J. F. Geisz, W. Olavarria, M. Young, A. Duda, P. Dippo, D. J. Friedman, and M. A. Steiner (2015), “Development of a 2.0 eV AlGaInP Solar Cell Grown by OMVPE”, Presented at IEEE 42nd Photovoltaic Specialist Conference (PVSC), New Orleans, LA, USA, Jun. 14-19, 2015.
- [7] T. Dey, “Magnetic nanoparticles and cellulosic nanofibers to remove arsenic and other heavy metals from water”, Nanotechnology for water purification (Ed) T. Dey, Boca Raton, USA: Universal Publishers, 2012, pp. 1-28.
- [8] A. Kunioka and T. Nakada, “High-efficiency selenium photovoltaic solar cells”, Jpn. J. Appl. Phys., vol. 21, no. S2, pp. 73-75, 1982.10.7567/JJAPS.21S2.73
- [9] T. Dey and D. Naughton, “Nano-porous sol-gel derived hydrophobic glass coating for increased light transmittance through greenhouse”, Mater. Res. Bull., vol. 116, pp. 126-130, Aug. 2019, doi: 10.1016/j.materresbull.2019.04.027.10.1016/j.materresbull.2019.04.027
- [10] T. Nakada and A. Kunioka, “Polycrystalline thin-film TiO2 /Se solar cells”, Jpn. J. Appl. Phys., vol. 24, no. 7A, pp. L536-L538, 1985.10.1143/JJAP.24.L536
- [11] K. Tennakone, G. R. R. A. Kumara, I. R. M. Kottegoda, V. P. S. Perera, and G. M. L. P. Aponsu, “Nanoporous n-TiO2 /selenium/p-CuCNS photovoltaic cell”, J. Phys. D: Appl. Phys., vol. 31, no. 18, pp. 2326-2330, June 1998, doi: 10.1088/0022-3727/31/18 /019.
- [12] K.Wang, Y. Shi, H. Zhang, Y. Xing, Q. Dong, and T. Ma, “Selenium as photoabsorber for inorganicorganic hybrid solar cells”, Phys. Chem. Chem. Phys., vol. 16, no. 42, pp. 23316-23319, Nov. 2014, doi: 10.1039/c4cp02821j.10.1039/C4CP02821J25259378
- [13] Y. Tang, “Copper indium gallium selenide thin film solar cells”, Nanostructured solar cells, (Ed) N. Das, InTech Open, 2017, doi: 10.5772/65291.10.5772/65291
- [14] A. E. Zaghi, M. Buffiere, J. Koo, G. Brammertz, M. Batuk, C. Verbist, J. Hadermann, W. K. Kim, M. Meuris, J. Poortmans, and J. Vleugels, “Effect of selenium content of CuInSex alloy nanopowder precursors on recrystallization of printed CuInSe2 absorber layers during selenization heat treatment”, lThin Solid Films, vol. 582, pp. 11-17, May 2015, doi: 10.1016/j.tsf.2014.10.003.10.1016/j.tsf.2014.10.003
- [15] L. Etgar, “Semiconductor nanocrystals as light harvesters in solar cells”, Materials, vol. 6, no. 2, pp. 445-459, Feb. 2013, doi: 10.3390/ma6020445.10.3390/ma6020445545209128809318
- [16] J. Yang, J-Y Kim, J. H. Yu, T-Y Ahn, H. Lee, T-S Choi, Y-W Kim, J. Joo, M. J. Ko, and T. Hyeon, “Copper-indium-selenide quantum dot-sensitized solar cells”, Phys. Chem. Chem. Phys., vol. 15, no. 47, pp. 20517-20525, Nov. 2013, doi: 10.1039/c3cp 54270j.
- [17] L. Yang, C. McCue, Q. Zhang, E. Uchaker, Y. Mai, and G. Cao, “Highly efficient quantum dot- sensitized TiO2 solar cells based on multilayered semiconductors (ZnSe/CdS/CdSe)”, Nanoscale, vol. 7, no. 7, pp. 3173-3180, Dec. 2014, doi: 10.1039/C4NR06935H.10.1039/C4NR06935H
- [18] M. Zhou, G. Shen, Z. Pan, and X. Zhong, “Selenium cooperated polysulfide electrolyte for efficiency enhancement of quantum dot-sensitized solar cells”, J. Energy Chem., vol. 38, pp. 147-152, Nov. 2019, doi: 10.1016/j.jechem.2018.12.010.10.1016/j.jechem.2018.12.010
- [19] K.W. Jonhston, A. G. Pattantyus-Abraham, J. P. Clifford, S. H. Myrskog, D. D. MacNeil, L. Levina, and E. H. Sargent “Schottky-quantum dot photovoltaics for efficient infrared power conversion” Appl. Phys. Lett. vol. 92, no. 15, pp. 151115:1-151115:3, Apr. 2008, doi: 10.1063/1.2912340.10.1063/1.2912340
- [20] D. Ratan, T. Jiang, D. A. Barkhouse, W. Xihua, G. P-A Andras, B. Lukasz, L. Larissa, and E. H. Sargent, “Ambient-processed colloidal quantum dot solar cells via individual pre-encapsulation of nanoparticles”, J. Am. Chem. Soc.,, vol. 132, no. 17, pp. 5952-5953, Apr. 2010, doi: 10.1021/ja1013695.10.1021/ja101369520387887
- [21] O. P. Yadav, Y. K. Yadav, A. R. Das, T. Dey, S. Kakkar, and M. L. Singla, “Catalytic oxidation of carbonmonoxide using platinum nanoparticles synthesized in microemulsion”, Asian J. Sci. Res.,, vol. 1, no. 1, pp. 79-84, 2008, doi: 10.3923/ajsr.2008.79.84.10.3923/ajsr.2008.79.84
- [22] P. Liu, L. Kloo, and J.M. Gardner, “Cross-linked sulfur-selenium polymers as hole-transporting materials in dye-sensitized solar cells and perovskite solar cells”, ChemPhotoChem, vol. 1, no. 8, pp. 363-368, Aug. 2017, doi: 10.1002/cptc.201700037.10.1002/cptc.201700037
- [23] M. A. Green, A. Ho-Baillie, and H. J. Snaith, “The emergence of perovskite solar cells”, Nat. Photonics, vol. 8, no. 7, pp. 506-514, Jul. 2014, doi: 10.1038/NPHOTON.2014.134.10.1038/nphoton.2014.134
- [24] S. P. Singh and P. Nagarjuna, “Organometal halide perovskites as useful materials in sensitized solar cells”, Dalton Trans.,, vol. 43, no. 14, pp. 5247-5251, Feb. 2014, doi: 10.1039/c3dt53503g.10.1039/c3dt53503g24577264
- [25] T. Dey, “UV-reflecting sintered nano-TiO2 thin film on glass for anti-bird strike application”, Surf. Eng., July 2020, doi: 10.1080/02670844.2020.1796900.10.1080/02670844.2020.1796900
- [26] Z. Huo, S-H Wei, and W-J Yin, “High-throughput screening of chalcogenide single perovskites by first-principles calculations for photovoltaics”, J. Phys. D Appl. Phys., vol. 51, no. 47, Art no. 474003, Sep. 2018, doi: 10.1088/1361-6463/aae1ee.10.1088/1361-6463/aae1ee
- [27] Y. Peng, Q. Sun, H. Chen, and W-J Yin, “Disparity of the Nature of the Band Gap between Halide and Chalcogenide Single Perovskites for Solar Cell Absorbers”, J. Phys. Chem. Lett., vol. 10, no. 16, pp. 4566-4570, Aug. 2019, doi: 10.1021/acs.jpclett.9b01657.10.1021/acs.jpclett.9b0165731340644
- [28] Y. Y. Sun, M. L. Agiorgousis, P. Zhang, and S. Zhang, “Chalco-genide Perovskites for Photovoltaics”, Nano Lett., vol. 15, no. 1, pp. 581-585, Jan. 2015, doi: 10.1021/nl504046x.10.1021/nl504046x25548882
- [29] Y. Nishigaki, T. Nagai, M. Nishiwaki, T. Aizawa, M. Kozawa, K. Hanzawa, Y. Kato, H. Sai, H. Hiramatsu, H. Hosono and H. Fujiwara, “Extraordinary Strong Band-Edge Absorption in Distorted Chalcogenide Perovskites”, Sol. RRL, vol. 4, no. 5, Art no. 1900555, Jan. 2020, doi: 10.1002/solr.201900555.10.1002/solr.201900555
- [30] T. Dey and D. Naughton, “Cheap non-toxic non-corrosive method of glass cleaning evaluated by contact angle, AFM, and SEM-EDX measurements”, Environ. Sci. Pollut. Res., vol. 24, no. 15, pp. 13373-13383, May. 2017, doi: 10.1007/s11356-017-8926-4.10.1007/s11356-017-8926-428386893
- [31] A. Chatterjee, T. Dey, S. K. Sanyal, and S. P. Moulik, “Thermodynamics of micelle formation and surface chemical behaviour of p-tert-octylphenoxypolyethylene ether (Triton X-100) in aqueous medium”, J. Surface Sci. Technol., vol. 17, no. 1-2, pp. 1-15, 2001.
- [32] N. C. Giebink, G. P. Wiederrecht, M. R. Wasielewski, and S. R. Forrest, “Thermodynamic efficiency limit of excitonic solar cells”, Phys. Rev. B, vol. 83, no. 19, Art no. 195326, May 2011, doi: 10.1103/PhysRevB.83.195326.10.1103/PhysRevB.83.195326
- [33] W. Shockley and H. J. Queisser, “Detailed Balance Limit of Efficiency of p-n Junction Solar Cells”, J. Appl. Phys.,, vol. 32, no. 3, pp. 510-519, 1961, doi: 10.1063/1.1736034.10.1063/1.1736034
- [34] R. V. Angadi, B. Revanasiddesh, and P. K. Vineet Kumar, “A review on different types of materials employed in solar photovoltaic panel”, Int. J. Eng. Res. Technol., vol. 7, no. 8, Art no IJERTCONV7IS08084, 2019.
- [35] J. Jean, J. Xiao, R. Nick, N. Moody, M. Nasilowski, M. Bawendi, and V. Bulovi´c, “Synthesis cost dictates the commercial viability of lead sulfide and perovskite quantum dot photovoltaics”, Energy Environ. Sci., vol. 11, no. 9, pp. 2295-2305, Jul. 2018, doi: 10.1039/C8EE01348A.10.1039/C8EE01348A