References
- [1]Ö. Kasar, M. Kahriman, and M. A. Gozel, “Application of ultra wideband RF energy harvesting by using multisection Wilkinson power combiner,” International Journal of RF and Microwave ComputerAided Engineering, vol. 29, no. 1, pp. 1-8, 2019.10.1002/mmce.21600
- [2] Y. Wu, Y. Liu, Q. Xue, S. Li, and C. Yu, “Analytical design method of multiway dual-band planar power dividers with arbitrary power division,” IEEE Transactions on Microwave Theory Techniques, vol. 58, no. 12, pp. 3832-3841, 2010.10.1109/TMTT.2010.2086712
- [3] M. Pozar, Microwave Engineering, 3rd ed. New York, USA: Wiley, 2006.
- [4] K. M. Cheng and C. Law, “A novel approach to the design and implementation of dual-band power divider,” (in English), IEEE Trans. Microw. Theory Tech., Article vol. 56, no. 2, pp. 487-492, Feb 2008, doi: 10. 1109/tmtt. 2007. 914629.10.1109/TMTT.2007.914629
- [5] J. Kim and Y. Lee, “A Z-Transform Method for Synthesis of Unequal-Length Multisection Transmission Lines for Multiband Applications,” IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 9, pp. 3200-3210, 2017.10.1109/TMTT.2017.2678474
- [6] S. Kumar and M. Kumar, “Ultra wide band Wilkinson equal power divider using rectangular rings of different impedance,”, International Conference on Medical Imaging, m-Health and Emerging Communication Systems (MedCom), 2014, pp. 49-57.10.1109/MedCom.2014.7005974
- [7] A. Belen, P. Mahouti, F. GNE, and H. Partal, “Design and Implementation of Doppler Microwave Motion Sensor for Indoor Application,” Sigma Journal of Engineering and Natural Sciences, vol. 36, no. 3, pp. 849-859, 2018.
- [8]Ö. Kasar, M. Kahriman, and M. A. Gözel, “A New Multi Stepped Real Impedance Matching Method with Euler Polynomials and its Application on Transmission Line,” Journal of Engineering Sciences and Design, vol. 5, no. 3, pp. 547-552, 2017.10.21923/jesd.325827
- [9] S. Gao, S. Sun, and S. Xiao, “A novel wideband bandpass power divider with harmonic-suppressed ring resonator,” IEEE Microwave Wireless Components Letters, vol. 23, no. 3, pp. 119-121, 2013.10.1109/LMWC.2013.2244873
- [10] D. Hawatmeh, K. Al Shamaileh, N. Dib, and A. Sheta, “Design and analysis of a 3-way unequal split ultra-wideband Wilkinson power divider,” International Journal of Electronics, vol. 100, no. 8, pp. 1062-1071, 2013.10.1080/00207217.2012.731373
- [11] Y.-A. Lai, C.-M. Lin, J.-C. Chiu, C.-H. Lin, and Y.-H. Wang, “A compact Ka-band planar three-way power divider,” IEEE Microwave Wireless Components Letters, vol. 17, no. 12, pp. 840-842, 2007.10.1109/LMWC.2007.910476
- [12] H. Oraizi and A. Yousefi, “Optimum design of a wideband planar N-way fork power divider with arbitrary power division and input-to-output impedance matching,” AEU-International Journal of Electronics Communications, vol. 79, pp. 83-93, 2017.10.1016/j.aeue.2017.05.038
- [13] C. Zhu, J. Xu, W. Kang, and W. Wu, “Microstrip multifunctional reconfigurable wideband filtering power divider with tunable center frequency, bandwidth, and power division,” IEEE Transactions on Microwave Theory Techniques, vol. 66, no. 6, pp. 2800-2813, 2018.10.1109/TMTT.2018.2811799
- [14] C. Zhu and J. Zhang, “Design of High-Selectivity Asymmetric Three-Way Equal Wideband Filtering Power Divider,” IEEE Access, vol. 7, pp. 55329-55335, 2019.10.1109/ACCESS.2019.2913314
- [15] L. Wang et al, “An on-Chip Planar Broadband 3-Way Power Divider for Josephson Voltage Circuits,” IEEE Transactions on Applied Superconductivity, vol. 31, no. 1, pp. 1-4, 2020.10.1109/TASC.2020.3014406
- [16] H. Eghlidi, K. Mehrany, and B. Rashidian, “Analytical approach for analysis of nonuniform lossy/lossless transmission lines and tapered microstrips,” IEEE Transactions on Microwave Theory and Techniques, vol. 54, no. 12, pp. 4122-4129, 2006.10.1109/TMTT.2006.885565
- [17] D. Hawatmeh, N. Dib, and K. Alshamaileh, “Microstrip Non-uniform Transmission Lines Triple Band 3-way Unequal Split Wilkinson Power Divider,” Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 62, no. 3, pp. 288-293, 2017.
- [18] X. Wang, I. Sakagami, A. Mase, and M. Ichimura, “Trantanella Wilkinson power divider with additional transmission lines for simple layout,” IET Microwaves, Antennas & Propagation, vol. 8, no. 9, pp. 666-672, 2014.10.1049/iet-map.2013.0454
- [19] Y.-H. Pang and Z.-H. Li, “Dual-band bandpass Wilkinson power divider of controllable bandwidths,” Electronics Letters, vol. 52, no. 7, pp. 537-539, 2016.10.1049/el.2015.3645
- [20] V. Tas and A. Atalar, “An optimized isolation network for the Wilkinson divider,” IEEE Trans. Microw. Theory Tech, vol. 62, no. 12, pp. 3393-3402, 2014.10.1109/TMTT.2014.2365533
- [21] H. Chen, Y. Zhou, T. Zhang, W. Che, and Q. Xue, “ N-Way Gysel Power Divider With Arbitrary Power-Dividing Ratio,” IEEE Trans. Microw. Theory Tech., vol. 67, no. 2, pp. 659-669, 2018.10.1109/TMTT.2018.2883049
- [22] P. Mahouti, M. A. Belen, H. P. Partal, S. Demirel, and F. Gúnes, “Miniaturization with dumbbell shaped defected ground structure for power divider designs using Sonnet,” in 2015 31st International Review of Progress in Applied Computational Electromagnetics (ACES), 2015: IEEE, pp. 1-2.
- [23] P. Singh, S. Basu, and Y.-H. Wang, “Coupled line power divider with compact size and bandpass response,” Electronics letters, vol. 45, no. 17, pp. 892-894, 2009.10.1049/el.2009.1488