Have a personal or library account? Click to login

Application and verification of partial discharge measurement system for power cable based on oscillating wave voltage

Open Access
|Nov 2020

References

  1. [1] W. Z. Chang, F. Du, J. G. Bi, S. Yuan, Y. P. Gong, and Y. Yang, “Assessment of Creeping Discharge Initiated by Metal Particles on the Silicone Rubber/XLPE Interface Cable Joints”, Journal of Electrical Engineering, vol. 70, no. 5, pp. 370-378, 2019.10.2478/jee-2019-0068
  2. [2] S. Boggs and J. Densley, “Fundamentals of Partial Discharge the Context of Field Cable Testing”, IEEE Electrical Insulation Magazine, vol. 16, no. 5, pp. 13-18, 2000.10.1109/57.871416
  3. [3] M. Wu, H. Cao, J. Cao, H. L. Nguyen, J. B. Gomes, and S. P. Krishnaswamy, “An Overview of State-of-the-Art Partial Discharge Analysis Techniques for Condition Monitoring”, IEEE Electrical Insulation Magazine, vol. 31, no. 6, pp. 2235, 2015.10.1109/MEI.2015.7303259
  4. [4] W. Z. Chang, F. Du, J. G. Bi, J. Shao, J. Peng, J. P. Liu, and H. M. Wang, “Development Process of Micropores Partial Discharge of Silicon Rubber Prefabricated Cable Joint”, Journal of Electrical Engineering, vol. 69, no. 5, pp. 366-372, 2018.10.2478/jee-2018-0053
  5. [5] M. G. Danikas and F. V. Topalis, “Partial Discharge Considerations Gas Insulated Switchgear (GIS)”, Journal of Electrical Engineering, vol. 53, no. 9, pp. 281-284, 2000.
  6. [6] G. C. Montanari, A. Cavallini, and F. Puletti, “A New Approach to Partial Discharge Testing of HV Cable Systems”, IEEE Electrical Insulation Magazine, vol. 22, no. 1, pp. 15-23, 2002.10.1109/MEI.2006.1618967
  7. [7] G. M. Wang, S. J. Kim, G. S. Kil, and S. W. Kim, “Optimization of Wavelet and Thresholding for Partial Discharge Detection under HVDC”, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, no. 1, pp. 200-208, 2017.10.1109/TDEI.2016.005969
  8. [8] G. M. Wang and G. S. Kil, “Measurement and Analysis of Partial Discharge using an Ultra-high Frequency Sensor for Gas Insulated Structures”, Metrology and Measurement System, vol. 24, no. 3, pp. 515-524, 2017.10.1515/mms-2017-0045
  9. [9] A. Haddad and D. F. Warne, Advances High Voltage Engineering, 1st ed., The Institution of Engineering and Technology: Stevenage, UK, 2004; pp. 3773.10.1049/PBPO040E
  10. [10] A. R. Mor, P. H. F. Morshuis, P. Llovera, V. Fuster, and A. Quijano, “Localization Techniques of Partial Discharges at Cable Ends Off-line Single-sided Partial Discharge Cable Measurements”, IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, no. 1, pp. 428-434, 2016.10.1109/TDEI.2015.005395
  11. [11] “The Method for Partial Discharge Testing of 6kV 35kV Power Cables based on Oscillating Wave Voltage”, National Energy Administration DL/T-1576, 1st ed, China NEA, 2016.
  12. [12] “Guide for Field Testing of Shielded Power Cable Systems Rated 5kV and above with Damped Alternating Current (DAC) Voltage”, Institute of Electrical and Electronics Engineers, 1st ed, United States: IEEE Power and Energy Society, 2015.
  13. [13] R. Houtepen, L. Chmura, J. J. Smit, B. Quak, Paul P. Seitz, and E. Gulski, “Estimation of Dielectric Loss using Damped AC Voltages”, IEEE Electrical Insulation Magazine, vol. 27, no. 3, pp. 2025, 2011.10.1109/MEI.2011.5871365
  14. [14] “DL/T 1932-The Verification Method of Partial Discharge Measuring System for 6kV 35kV Power Cables based on Oscillating Wave Voltage”, National Energy Administration, 1st ed, China: NEA, 2018.
  15. [15] Z. Hou, H. J. Li, Z. G. Sun, B. Liu, S. C. Ji, and C. Y. Zhu, “A Novel Sinusoidal Damped Oscillating Voltage Generator for the Detection of Partial Discharge MV Distribution Power Cables”, IEEE Transactions on Power Delivery, vol. 31, no. 1, pp. 410-411, 2016.10.1109/TPWRD.2015.2473102
  16. [16] W. Hauschild and E. Lemke, High-Voltage Test and Measuring Techniques, 2nd ed., Springer: Switzerland, 2019; pp 169-236.10.1007/978-3-319-97460-6_4
  17. [17] “High-voltage Test Techniques-Part 1: General Definitions and Test Requirements”, International Electrotechnical Commission IEC 60060-1, 3rd ed., Switzerland: IEC, 2010.
  18. [18] 60060-2, “High-voltage Test Techniques-Part 2: Measuring systems”, International Electrotechnical Commission IEC 60060-1, 3rd ed., Switzerland: IEC, 2010.
DOI: https://doi.org/10.2478/jee-2020-0045 | Journal eISSN: 1339-309X | Journal ISSN: 1335-3632
Language: English
Page range: 333 - 339
Submitted on: Sep 27, 2020
Published on: Nov 26, 2020
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 6 times per year

© 2020 Guangke Xu, Xing Li, Weiwei Zhang, Yuxin Yun, Lingying Chen, Jiahua Shen, Guoming Wang, Gyung-Suk Kil, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.