Have a personal or library account? Click to login
Cogging torque in slotless permanent magnet machines Cover

Cogging torque in slotless permanent magnet machines

Journal of Electrical Engineering
Volume 71 (2020): Issue 3 (June 2020)
By: Mario Vukotić,  Danijel Rodić,  Boris Benedičič and  Damijan Miljavec  
Open Access
|Aug 2020

References

  1. [1] N. Bianchi, S. Bolognani, and F. Luise, “Potentials and limits of high speed PM motors”, IEEE Transactions on Industry Applications, 2004, vol. 40, no. 6, pp. 15701578.10.1109/TIA.2004.836173
    Search in Google ScholarBack to article
  2. [2] N. Bianchi, S. Bolognani, and F. Luise, “Analysis and design of a PM brushless motor for high-speed operations”, IEEE Transactions on Energy Conversion, 2005, vol. 20, no. 3, pp. 629637.10.1109/TEC.2005.847991
    Search in Google ScholarBack to article
  3. [3] N. Bianchi, S. Bolognani, and F. Luise, “High speed drive using a slotless PM motor”, IEEE Transactions on Power Electronics, 2006, vol. 21, no. 4, pp. 10831090.10.1109/TPEL.2006.876824
    Search in Google ScholarBack to article
  4. [4] O. Wallmark and P. Kjellqvist, “Analysis of a Low-Cost Air-Gap Winding for Permanent Magnet Synchronous Motors”, IEEE Transactions on Energy Conversion, 2009, vol. 24, no. 4, pp. 841847.10.1109/TEC.2009.2025343
    Search in Google ScholarBack to article
  5. [5] T. S. Low, T. A. Jabbarand, and T. S. Tan, “Design aspects and performance of a slotless PM motor for hard disk drives”, IEEE Industry Applications Magazine, 1997, vol. 3, no. 6, pp. 4351.10.1109/2943.628139
    Search in Google ScholarBack to article
  6. [6] D. Lee, A. Jin, and B. Min, “Optimisation method to maximise torque density of high-speed slotless permanent magnet synchronous machine aerospace applications”, IET Electric Power Applications, 2018, vol. 12, no. 8, pp. 10751081.10.1049/iet-epa.2017.0873
    Search in Google ScholarBack to article
  7. [7] H. Lee, E. Lee, S. Kwon et al, “A Study on Brushless PM Slotless Motor with Toroidal Winding”, 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA, May 2017, pp. 16.10.1109/IEMDC.2017.8002376
    Search in Google ScholarBack to article
  8. [8] R. P. Praveen, M. H. Ravichandran, V. T. S. Achari et al, “A Novel Slotless Halbach-Array Permanent-Magnet Brushless DC Motor for Spacecraft Applications”, IEEE Transactions on Industrial Electronics, 2012, vol. 59, no. 9, pp. 35533560.10.1109/TIE.2011.2161058
    Search in Google ScholarBack to article
  9. [9] P. Puentener, M. Schuck, D. Steinert et al, “A 150000-r/min bearingless slice motor”, IEEE/ASME Transactions on Mechatronics, 2018, vol. 23, no. 6, pp. 29632967.10.1109/TMECH.2018.2873894
    Search in Google ScholarBack to article
  10. [10] P. Pfister and Y. Perriard, “Very High Speed Slotless Permanent Magnet Motors, Analytical Modeling, Optimization, Design and Torque Measurement Methods”, IEEE Transactions on Industrial Electronics, 2010, vol. 57, no. 1, pp. 296303.10.1109/TIE.2009.2027919
    Search in Google ScholarBack to article
  11. [11] D. Steinert, T. Kolar, and J. W. Nussbaumer, “Slotless Bearingless Disk Drive for High-Speed and High-Purity Applications”, IEEE Transactions on Industrial Electronics, 2014, vol. 61, no. 11, pp. 59745986.10.1109/TIE.2014.2311379
    Search in Google ScholarBack to article
  12. [12] Y. N. Zhilichev, “Analytic solutions of magnetic field problems slotless permanent magnet machines”, COMPEL - The international journal for computation and mathematics electrical and electronic engineering, 2000, vol. 19, no. 4, pp. 940955.10.1108/03321640010347385
    Search in Google ScholarBack to article
  13. [13] A. Tessarolo, M. Bortolozzi, and C. Bruzzese, “Explicit Torque and Back EMF Expressions for Slotless Surface Permanent Magnet Machines with Different Magnetization Patterns”, IEEE Transactions on Magnetics, 2016, vol. 52, no. 8.10.1109/TMAG.2016.2543682
    Search in Google ScholarBack to article
  14. [14] X. Wang, S. Yan, X. Zhang et al, “The Rotor Topology of Slotless Permanent-Magnet Brushless DC Motor”, International Conference on Electrical Machines and Systems, Incheon, South Korea, October 2010.
    Search in Google ScholarBack to article
  15. [15] F. Luise, A. Tessarolo, F. Agnolet et al, “Design Optimization and Testing of High-Performance Motors: Evaluating a Compromise Between Quality Design Development and Production Costs of a Halbach-Array PM Slotless Motor”, IEEE Industry Applications Magazine, 2016, vol. 22, no. 6, pp. 19??32.10.1109/MIAS.2015.2459118
    Search in Google ScholarBack to article
  16. [16] A. Yoon, X. Yi, J. Martin et al, “A High-Speed, High-Frequency, Air-Core PM Machine for Aircraft Application”, 2016 IEEE Power and Energy Conference at Illinois (PECI), Champaign, IL, USA, February 2016, pp. 14.10.1109/PECI.2016.7459221
    Search in Google ScholarBack to article
  17. [17] M. S. Islam, I. Husain, and R. Mikail, “Slotless Lightweight Motor for Drone Applications”, 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, USA, October 2017, pp. 50415048.10.1109/ECCE.2017.8096851
    Search in Google ScholarBack to article
  18. [18] Z. Q. Zhu, Z. P. Xia, D. Howe et al, “Reduction of cogging force slotless linear permanent magnet motors”, IEE Proceedings-Electric Power Applications, 1997, vol. 144, no. 4, pp. 277282.10.1049/ip-epa:19971057
    Search in Google ScholarBack to article
  19. [19] X. Z. Huang, J. Li, Q. Tan et al, “Design Principles of a Phase-Shift Modular Slotless Tubular Permanent Magnet Linear Synchronous Motor With Three Sectional Primaries and Analysis of Its Detent Force”, IEEE Transactions on Industrial Electronics, 2018, vol. 65, no. 12, pp. 93469355.10.1109/TIE.2018.2813992
    Search in Google ScholarBack to article
  20. [20] P. Jalali, S. T. Boroujeni, and N. Bianchi, “Analytical Modeling of Slotless Eccentric Surface-Mounted PM Machines Using a Conformal Transformation”, IEEE Transactions on Energy Conversion, 2017, vol. 32, no. 2, pp. 658666.10.1109/TEC.2016.2640450
    Search in Google ScholarBack to article
  21. [21] Z. Q. Zhu, D. Howe, and C. C. Chan, “Improved Analytical Model for Predicting the Magnetic Field Distribution Brushless Permanent-Magnet Machines”, IEEE Transactions on Magnetics, 2002, vol. 38, no. 1, pp. 229238.10.1109/20.990112
    Search in Google ScholarBack to article
  22. [22] D. Ishak, Z. Q. Zhu and D. Howe, “Unbalanced Magnetic Forces Permanent Magnet Brushless Machines with Diametrically Asymmetric Phase Windings”, 40th IAS Annual Meeting, Hong Kong, October 2005, vol. 2, pp. 10371043.10.1109/IAS.2005.1518484
    Search in Google ScholarBack to article
  23. [23] M. Markovic and Y. Perriard, “Simplified Design Methodology for a Slotless Brushless DC Motor”, IEEE Transactions on Magnetics, 2006, vol. 42, no. 12, pp. 38423846.10.1109/TMAG.2006.884108
    Search in Google ScholarBack to article
  24. [24] W. Cheng, Y. Sun, L. Yu et al, “Analytical solution to magnetic field distribution of a parallel magnetised rotor with cylindrical or ring-type permanent magnet”, IET Electric Power Applications, 2014, vol. 9, no. 6, pp. 429437.10.1049/iet-epa.2014.0162
    Search in Google ScholarBack to article
  25. [25] Y. Li, Q. Lu, Z. Q. Zhu et al, “Analytical Synthesis of Air-Gap Field Distribution Permanent Magnet Machines With Rotor Eccentricity by Superposition Method”, IEEE Transactions on Magnetics, 2015, vol. 51, no. 11.10.1109/TMAG.2015.2442297
    Search in Google ScholarBack to article
  26. [26] W. Q. Chu and Z. Q. Zhu, “On-Load Cogging Torque Calculation Permanent Magnet Machines”, IEEE Transactions on Magnetics, 2013, vol. 49, no. 2, pp. 29822989.10.1109/TMAG.2012.2236348
    Search in Google ScholarBack to article
  27. [27] L. Zhu, S. Z. Jiang, Z. Q. Zhu et al, “Analytical Methods for Minimizing Cogging Torque Permanent-Magnet Machines”, IEEE Transactions on Magnetics, 2009, vol. 45, no. 4, pp. 20232031.10.1109/TMAG.2008.2011363
    Search in Google ScholarBack to article
  28. [28] O. Wallmark, P. Meier, and F. Kjellqvist, “Analysis of axial leakage high-speed slotless PM motors for industrial hand tools”, IEEE Transactions on Industry Applications, 2009, vol. 45, no. 5, pp. 18151820.10.1109/TIA.2009.2027109
    Search in Google ScholarBack to article
  29. [29] D. Howe and Z. Q. Zhu, “The Influence of Finite Element Discretisation on the Prediction of Cogging Torque Permanent Magnet Excited Motors”, IEEE Transactions on Magnetics, 1992, vol. 28, no. 2, pp. 10801083.10.1109/20.123869
    Search in Google ScholarBack to article
  30. [30] S. H. Won and J. Lee, “BLDC spindle motor cogging torque calculation with the moving material method the finite element method”, IEEE International Magnetics Conference (INTER-MAG), Nagoya, Japan, April 2005.10.1109/INTMAG.2005.1463798
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/jee-2020-0026 | Journal eISSN: 1339-309X | Journal ISSN: 1335-3632
Journal RSS Feed
Language: English
Page range: 195 - 202
Submitted on: Apr 19, 2020
Published on: Aug 10, 2020
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 6 issues per year
Keywords:
cogging torque,
slotless permanent-magnet machines,
manufacturing process
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2020 Mario Vukotić, Danijel Rodić, Boris Benedičič, Damijan Miljavec, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 71 (2020): Issue 3 (June 2020)Next article