References
- [1] A. Beroual and A. Haddad, “Recent Advances in the Quest for a New Insulation Gas with a Low Impact on the Environment to Replace Sulfur Hexafluoride (SF6) gas in High-voltage Power Network Applications, Energies, vol. 10, no. 8, pp. 1216, 2017.10.3390/en10081216
- [2] M. G. Danikas and F. V. Topalis, “Partial Discharge Considerations in Gas Insulated Switchgear (GIS)”, Journal of Electrical Engineering, vol. 53, no. 9, pp. 281-284, 2000.
- [3] M. G. Danikas and F. V. Topalis, “[”, A, Haddad D, F, Warne Advances in high voltage engineering, 1st ed, United Kingdom: The Institution of Engineering Technology, pp. 37-73, 2004.
- [4] S. Xiao, X. Zhang, J. Tang, and S. Liu, “A Review on SF6Substitute Gases Research Status of CF3I Gases”, Energy Report vol, 4, pp. 486-496, 2018.10.1016/j.egyr.2018.07.006
- [5] S. Xiao, X. Zhang, J. Tang, and S. Liu, “[”, Intergovernmental Panel on Climate Change Guidelines fornational greenhouse gas inventories, 2006.
- [6] Y. Kieffel, F. Biquez, and P. Ponchon, “Alternative Gas to SF6 for use in High Voltage Switchgears: g3”, International Conference on Electricity Distribution, pp. 1-5, 2015.
- [7] H. Okubo and A. Beroual, “Recent Trend Future Perspectives in Electrical Insulation Techniques in Relation to Sulfur Hexafluoride (SF6) Substitutes for High Voltage Electric Power Equipment”, IEEE Electrical Insulation Magazine, vol. 27, no. 2, pp. 34-42, 2011.10.1109/MEI.2011.5739421
- [8] T. Rokunohe, Y. Yagihashi, F. Endo, and T. Oomori, “Fundamental Insulation Characteristics of air, N2, CO2, N2/O2”, Electrical Engineering in Japan, vol. 155, no. 3, pp. 9-17, 2006.10.1002/eej.20348
- [9] H. Goshima, H. Shinkai, and M. yashima, “Lightning Impulse Breakdown Characteristics of High-Pressure N2as an Alternative InsulationGas to SF6”, Gaseous Dielectrics IX, pp. 359-364, 2001.10.1007/978-1-4615-0583-9_50
- [10] L. Chen, P. Widger, M. S. Kamarudin, H. Griffiths, and A. Haddad, “CF3I Gas Mixtures: Breakdown Characteristics Potential for Electrical Insulation”, IEEE Transactions on Power Delivery 32, no, 2,, pp. 1089-1097, 2017.
- [11] X. Zhang, S. Xiao, J. Zhou, and J. Tang, “Experimental Analysis of the Feasibility of CF3I/CO2 Substituting SF6 asInsulation Medium using Needle-plate Electrodes”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 21, no. 4, pp. 1895-1900, 2014.
- [12] A. Chachereau, M. Rabie, and C. M. Franck, “Electron Swarm Parameters of the Hydrofluoroolefine HFO1234ze”, Plasma Sources Science Technology, vol. 25, no. 4, pp. 045005, 2016.
- [13] “GE Grid Solutions SF6 Alternative For High Voltage Applications”, Available online: https://www.gegridsolutions.com/HVMVEquipment/catalog/g3/(accessed on December 2019).
- [14] Y. Kieffel, T. Irwin, P. Ponchon J. Owens, “Green Gas to Replace SF6 in Electrical Grids”, IEEE Power Energy Magazine, vol. 14, no. 2, pp. 32-39, 2016.10.1109/MPE.2016.2542645
- [15] G. M. Wang, W. H. Kim, G. S. Kil, S. W. Kim, and J. R. Jung, “Green Gas for a Grid as An Eco-Friendly Alternative Insulation Gas to SF6: From the Perspective of Partial Discharge Under AC”, Applied Science, vol. 9, no. 4, pp. 651, 2019.10.3390/app9040651
- [16] B. Zhang, N. Uzelac Y. Cao, “Fluoronitrile/CO2 Mixture as an Eco-friendly Alternative to SF6 for Medium Voltage Switchgears”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 25, no. 4, pp. 1340-1350, 2018.
- [17] H. E. Nechmi a Beroual, A. Girodet, and P. Vinson, “Fluoronitriles /CO2 Gas Mixture as Promising Substitute to SF6 for Insulation in High Voltage Applications”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 23, no. 5, pp. 2587-2593, 2016.
- [18] Institute of Electrical Electronics Engineers IEEE C37, 100, 1-IEEE standard of common requirements for high voltage power switchgear rated above 1000 V, 1st ed, USA: IEEE, 2007,.
- [19] 3MTM NovecTM 4710 Insulating Gas, pp. 1-4, 2017.
- [20] Y. Tu, Y. Cheng, C. Wang, X. Ai, F. Zhou, and G. Chen, “Insulation characteristics of Fluoronitrile/CO2 Gas Mixture under DC Electric Field”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 25, no. 4, pp. 1324-1311, 2018.
- [21] Y. Kieffel, F. Biquez, D. Vigouroux, P. Ponchon, A. Schlernitzauer, R. Magous, G. Cros, and J. G. Owens, “Characteristics of g3 an Alternative to SF6”, International Conference & Exhibition on Electricity Distribution, pp. 54-57, 2017.10.1049/oap-cired.2017.0795
- [22] Y. Kieffel, A. Girodet, F. Biquez, P. Ponchon, J. Owens, M. Costello, M. Bulinski, R. V. San, and K. Werner, “SF6 Alternative Development for High Voltage Switchgears”, CIGRE 2014, pp. 305, 2014.10.1109/PESGM.2015.7286096
- [23] Y. Kieffel and F. Biquez, “SF6 Alternative Development for High Voltage Switchgears”, Electrical Insulation Conference, pp. 379-383, 2015.10.1109/ICACACT.2014.7223577
- [24] J. G. Owens, “Greenhouse Gas Emission Reductions through Use of a Sustainable Alternative to SF6”, Electrical Insulation Conference, pp. 535-538, 2016.10.1109/EIC.2016.7548658
- [25] W. Chang, F. Du, J. Bi, J. Shao, J. Peng, J. Liu, and H. Wang, “Development Process of Micropores Partial Discharge of Silicon Rubber in Prefabricated Cable Joint”, Journal of Electrical Engineering, vol. 69, no. 5, pp. 366-372, 2018.10.2478/jee-2018-0053
- [26] G. M.Wang, S. J. Kim, G. S. Kil, and S. W. Kim, “Optimization of Wavelet Thresholding for Partial Discharge Detection under HVDC”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 24, no. 1, pp. 200-208, 2017.10.1109/TDEI.2016.005969
- [27] R. Sarathi, P. D. Singh, and M. G. Danikas, “Characterization of Partial Discharges in Transformer Oil Insulation under AC DC Voltage using Acoustic Emission Technique”, Journal of Electrical Engineering, vol. 58, no. 2, pp. 91-97, 2007.
- [28] G. M. Wang, G. S. Kil, H. K. Ji, and J. H. Lee, “Disturbance Elimination for Partial Discharge Detection in Spacer of Gas-Insulated Switchgears”, Energies, vol. 10, no. 11, pp. 1762, 2017.10.3390/en10111762
- [29] H. Ji, C. Li, Z. Pang, G. Ma, X. Cui, W. Zhao, and J. Wang, “Influence of Tip Corona of Free Particle on PD Patterns in GIS”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 24, no. 1, pp. 259-267, 2017.10.1109/TDEI.2016.006071
- [30] U. Schichler,W. Koltunowicz, F. Endo, K. Feser, A. Giboulet, A. Girodet, H. Hama, B. Hampton, H. G. Kranz, J. Lopez-roldan, L. Lundgaard, S. Meijer, C. Neumann, S. Okabe, J. Pearson, R. Pietsch, U. Riechert, and S. Tenbohlen, “Risk Assessment on Defects in GIS based on PD Diagnosis”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 20, no. 6, pp. 2165-2172, 2013.
- [31] B. Qi, C. Li, Z. Xing, and Z. Wei, “Particle Discharge Initiated by Free Moving Metallic Particles on GIS Insulation Surface: Severity Diagnosis Assessment”, IEEE Transactions on Dielectrics Electrical Insulation, vol. 21, no. 2, pp. 766-773, 2014.10.1109/TDEI.2013.003585
- [32] R. Sarathi and R. Umamaheswari, “Understanding the Partial Discharge Activity Generated due to Particle Movement in a Composite Insulation under AC Voltages”, International Journal of Electrical Power & Energy Systems, vol. 48, pp. 1-9, 2013.10.1016/j.ijepes.2012.11.017
- [33] International Electrotechnical Commission IEC 60270-High -Voltage Test Techniques-Partial Discharge Measurements, 3rd ed, Switzerland: IEC, 2000,.
- [34] G. M. Wang, H. E. Jo, S. J. Kim, S. W. Kim, and G. S. Kil, “Measurement Analysis of Partial Discharges in SF6 Gas under HVDC”, Measurement, vol. 91, pp. 351-359, 2016.10.1016/j.measurement.2016.05.033