References
- [1] C. Ogbuka, C. Nwosu, and M. Agu, “A Fast Hysteresis Current–Controlled Permanent Magnet Synchronous Motor Drive Based on Field Orientation”, Journal of Electrical Engineering, vol. 67, no. 2, pp. 69–77, 2016.10.1515/jee-2016-0011
- [2] V. Sarac, “Performance Optimization of Permanent Magnet Synchronous Motor by Cogging Torque Reduction”, Journal of Electrical Engineering, vol. 70, no. 3, pp. 218–226, 2019.10.2478/jee-2019-0030
- [3] S. Ooi, S. Morimoto, M. Sanada, and Y. Inoue, “Performance Evaluation of a High-Power-Density PMASynRM with Ferrite Magnets”, IEEE Transactions on Industry Applications, vol. 49, no. 3, pp. 1308–1315, 2013.
- [4] S. Morimoto, S. Ooi, Y. Inoue, and M. Sanada, “Experimental Evaluation of a Rare-Earth-Free PMASynRM With Ferrite Magnets for Automotive Applications”, IEEE Transactions on Industrial Electronics, vol. 61, no. 10, pp. 5749–5756, 2014.
- [5] S. Morimoto, M. Sanada, and Y. Takeda, “Performance of PM-Assisted Synchronous Reluctance Motor for High-Efficiency and Wide Constant-Power Operation”, IEEE Transactions on Industry Applications, vol. 37, no. 5, pp. 1234–1240, 2001.
- [6] G. Park, J. Kim, B. Son, and S. Jung, “Optimal Design of PMa-synRM for an Electric Propulsion System Considering Wide Operation Range and Demagnetization”, IEEE Transactions on Applied Superconductivity, vol. 28, no. 3, pp. 1–4, 2018.10.1109/TASC.2018.2807375
- [7] I. Boldea, L. Tutelea, and C. Pitic, “PM-Assisted Reluctance Synchronous Motor/Generator (PM-RSM) for Mild Hybrid Vehicles:Electromagnetic Design”, IEEE Transactions on Industry Applications, vol. 40, no. 2, pp. 492–498, 2004.10.1109/TIA.2004.824434
- [8] A. Tessarolo, “Accurate Computation of Multiphase Synchronous Machine Inductances Based on Winding Function Theory”, IEEE Transactions on Energy Conversion, vol. 27, no. 4, pp. 895–904, 2012.10.1109/TEC.2012.2219050
- [9] O. Payza, Y. Demir, and M. Aydin, “Investigation of Losses for a Concentrated Winding High-Speed Permanent Magnet-Assisted Synchronous Reluctance Motor for Washing Machine Application”, IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1–5, 2018.10.1109/TMAG.2018.2848881
- [10] M. Barcaro, N. Bianchi, and F. Magnussen, “Permanent-Magnet Optimization in Permanent-Magnet-Assisted Synchronous Reluctance Motor for a Wide Constant-Power Speed Range”, IEEE Transactions on Industrial Electronics, vol. 59, no. 6, pp. 2495–2502, 2012.
- [11] H. Huang, Y. Hu, Y. Xiao, and H. Lyu, “Research of Parameters and Antidemagnetization of Rare-Earth-Less Permanent Magnet-Assisted Synchronous Reluctance Motor”, IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1–4, 2015.10.1109/TMAG.2015.2445934
- [12] M. Islam, A. Arafat, S. Bonthu, and S. Choi, “Design of a Robust Five-Phase Ferrite-Assisted Synchronous Reluctance Motor with Low Demagnetization and Mechanical Deformation”, IEEE Transactions on Energy Conversion, vol. 34, no. 2, pp. 722–730, 2019.10.1109/TEC.2018.2882780
- [13] M. Obata, S. Morimoto, M. Sanada, and Y. Inoue, “Performance of PMASynRM with Ferrite Magnets for EV/HEV Applications Considering Productivity”, IEEE Transactions on Industry Applications, vol. 50, no. 4, pp. 2427–2435, 2014.
- [14] I. Bodea et al, “DTFC-SVM Motion-Sensorless Control of a PM-Assisted Reluctance Synchronous Machine as Starter-Alternator for Hybrid Electric Vehicles”, IEEE Transactions on Power Electronics, vol. 21, no. 3, pp. 711–719, 2006.10.1109/TPEL.2006.872369
- [15] P. Thounthong, S, Sikkabut, N. Poonnoy, P. Mungporn, B. Yodwong, P. Kumam, N. Bizon, B. Nahid-Mobarakeh, and S. Pierfederici, “Nonlinear Differential Flatness-Based Speed/Torque Control With State-Observers of Permanent Magnet Synchronous Motor Drives”, IEEE Transactions on Industry Applications, vol. 54, no. 3, pp. 2874–2884, 2018.
- [16] E. Trancho, E. Ibarra, A. Arias, I. Kortabarria, J. Jurgens, L. Marengo, A. Fricass, and J. V. Gragger, “PM-Assisted Synchronous Reluctance Machine Flux Weakening Control for EV and HEV Applications”, IEEE Transactions on Industrial Electronics, vol. 65, no. 4, pp. 2986–2995, 2018.
- [17] B. Kerdsup, N. Takorabet, and B. Nahidmobarakeh, “Design of Permanent Magnet-Assisted Synchronous Reluctance Motors with Maximum Efficiency-Power Factor and Torque per Cost”, in XIII International Conference on Electrical Machines (ICEM) 2018.10.1109/ICELMACH.2018.8506937
- [18] J. K. Author, “Etude et optimisation de machines `a aimants permanents `a d´emarrage direct sur le r´eseau”, PhD dissertation, UL. D´epartement de Formation Doctorale –Electronique et Electrotechnique, Docteur de l’Universit´e Henri Poincar´e, Nancy, France, 2011.
- [19] J.-M. Kim and S.-K. Sul, “Speed Control of Interior Permanent Magnet Synchronous Motor Drive for the Flux Weakening Operation”, IEEE Transactions on Industry Applications, vol. 33, no. 1, pp. 43–48, 1997.10.1109/28.567075
- [20] P.-Y. Lin and Y.-S. Lai, “Voltage Control Technique for the Extension of DC-Link Voltage Utilization of Finite-Speed SPMSM Drives”, IEEE Transactions on Industrial Electronics, vol. 59, no. 9, pp. 3392–3402, 2012.
- [21] S. Lee, “Closed-Loop Estimation of Permanent Magnet Synchronous Motor Parameters by PI Controller Gain Tuning”, IEEE Transactions on Energy Conversion, vol. 21, no. 4, pp. 863–870, 2006.10.1109/TEC.2005.853742