References
- [1] M. M. Abdullah, F. M. Rajab, and Saleh M. Al-Abbas, “Structural and optical characterization of Cr2O3 nanostructures: Evaluation of its dielectric properties”, AIP Advances, vol. 4, 027121, 2014.
- [2] Y. Marinova, J. M. Hohemberger, E. Cordoncillo, P. Escribano, J. B. Carda, “Study of solid solutions, with perovskite structure, for application in the field of ceramic pigments”, J. Europ. Ceram. Soc., vol. 23, pp. 213–220, 2003.
- [3] F. D. Lai, L. A. Wang, “Design of (ZrO2)x/(Cr2O3)y/(Al2O3)1-x-y superlattices for high transmittance APSM at 193 nm wavelength”, Microelectr. Engin., vol. 61-62, pp. 219–226, 2002.
- [4] T. Kohara, H. Tamagaki, Y. Ikari, H. Fujii, “Deposition of α − Al2O3 hard coatings by reactive magnetron sputtering”, Surf. Coat. Technol., vol. 185, pp. 166–171, 2004.
- [5] A. Khanna, D. G. Bhat, E. A. Payzant, “Growth and characterization of chromium oxide thin films prepared by reactive ac magnetron sputtering”, J. Vac. Sci. Technol., vol. A24, pp. 1870–1877, 2006.
- [6] A. Tarre, J. Aarik, H. Mändar, A. Niilisk, R. Pärna, R. Rammula, T. Uustare, A. Rosental, V. Sammelselg, “Atomic layer deposition of Cr2O3 thin films: Effect of crystallization on growth and properties”, Appl. Surf. Sc., vol. 254, pp. 5149–5156, 2008.
- [7] A. Niilisk, A. Rosental, A. Gerst, V. Sammelselg, T. Uustare, “Atomic-scale optical monitoring of the initial growth of TiO2 thin films”, Smart Optical Inorganic Structures and Devices. Proceedings of SPIE, vol. 4318, pp. 72–77, 2001.
- [8] H. Mändar, T. Uustare, J. Aarik, A. Tarre, A. Rosental, “Characterization of asymmetric rhombohedral twin in epitaxial α − Cr2O3 thin films by X-ray and electron diffraction”, Thin Solid Films, vol. 515, pp. 4570–4579, 2007.
- [9] R. E. Kirby, E. L. Garwin, F. K. King, and A. R. Nyaiesh, “Surface properties of Cr2O3 “, J. Appl. Phys., vol. 62, pp. 1400–1405, 1987.
- [10] B. Karlsson and C. G. Ribbing, “Optical constants and spectral selectivity of stainless steel and its oxides”, J. Appl. Phys., vol. 53(9), pp. 6340–6346, 1982.
- [11] R. S. Pavlov, V. B. Marzá and J. B. Carda, “Electronic absorption spectroscopy and colour of chromium-doped solids”, J. Mater. Chem., vol. 12, pp. 2825–2832, 2002.
- [12] R. H. Misho, W. A. Murad, G. H. Fattahallah, “Preparation and optical properties of thin films of CrO3 and Cr2O3 prepared by the method of chemical spray pyrolysis”, Thin Solid Films, vol. 169(2), pp. 235–239, 1989.
- [13] K. Anandan, and V. Rajendran, “Chromia (CR2O3) Nanoparticles Synthesized by using CRO3 via the facile Solvothermal Process and their Optical Properties”, Intern. J. Engin. Sciences Res. Technol., vol. 6(7), pp. 916–921, 2017.
- [14] T. Ivanova, M. Surtchev, and K. Gesheva, “Characterization of CVD Chromium Oxide Thin Films”, Phys. Stat. Sol. A, vol. 184(2), pp. 507–513, 2001.
- [15] T. Ivanova, K. Gesheva, A. Cziraki, A. Szekeres and E. Vlaikova, “Structural transformations and their relation to the optoelectronic properties of chromium oxide thin films”, J. Phys.: Conf. Ser., vol. 113, 012030, 2008.
- [16] M. Julkarnain, J. Hossain, K. S. Sharif, and K. A. Khan, “Optical properties of thermally evaporated Cr2O3 thin films”, Can. J. Chem. Engineering & Technology, vol. 3(4), pp. 81–85, 2012.
- [17] Y. Guo, S. J. Clark and J. Robertson, “Electronic and magnetic properties of Ti2O3, Cr2O3, and Fe2O3 calculated by the screened exchange hybrid density functional”, J. Phys.: Condens. Matt., vol. 24, 325504, 2012.
- [18] Ch.-S. Cheng, H. Gomi, and H. Sakata, “Electrical and Optical Properties of Cr2O3 Films Prepared by Chemical Vapour Deposition”, Phys. Stat. Sol. A, vol. 155, pp. 417–425, 1996.
- [19] P. Hones, M. Diserens, F. Lévy, “Characterization of sputter-deposited chromium oxide thin films”, Surf. Coat. Technol., vol. 120-121, pp. 277–283, 1999.
- [20] M. Tabbal, S. Kahwaji, T. C. Christidis, B. Nsouli, K. Zahraman, “Pulsed laser deposition of nanostructured dichromium trioxide thin films”, Thin Solid Films, vol. 515, pp. 1976–1984, 2006.
- [21] I. H. Malitson, “Interspecimen Comparison of the Refractive Index of Fused Silica”, J. Opt. Soc. Am., vol. 55(10), pp. 1205–1209, 1965.
- [22] T. S. Moss, G. J. Burrell, B. Ellis, Semiconductor Opto-Electronics, Butterworth and Co (Publishers) Ltd., pp. 19, 1973.
- [23] A. A. Rastorguev, M. G. Baronskiy, N. A. Zaitseva, L. A. Isupova, A. I. Kostyukov, T. V. Larina, N. A. Pakhomov, and V. N. Snytnikov, “Photoluminescence Properties of Microspherical Alumina-Chromium Catalyst”, Inorganic Materials: Applied Research, vol. 5(5), pp. 476–481, 2014.
- [24] G. K. B. Costa, A. López, I. C. S. Carvalho, O. Nakamura, N. Cella, L. P. Sosman, “Optical and structural properties of chromium impurities in niobium-gallium oxide”, Materials Chem. Phys., vol. 148, pp. 764–771, 2014.
- [25] B. M. Weckhuysen, R. A. Schoonheydt, “Recent progress in diffuse reflectance spectroscopy of supported metal oxide catalysts”, Catalysis Today, vol. 49, pp. 441–451, 1999.
- [26] R. L. Puurunen and B. M. Weckhuysen, “Spectroscopic Study of the Irreversible Deactivation of Chromia/Alumina Dehydrogenation Catalysts”, J. of Catalysis, vol. 210, pp. 418–430, 2002.
- [27] M. C. Biesinger, B. P. Payne, A. P. Grosvenor, L W. M. Lau, A. R. Gerson, R. St. C. Smart, “Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni”, Appl. Surf. Sc., vol. 257, pp. 2717–2730, 2011.
- [28] T. C. Kaspar, S. E. Chamberlin, S. A. Chambers, “Surface structure of α − Cr2O3 (0001) after activated oxygen exposure”, Surf. Sc., vol. 618, pp. 159–166, 2013.