Thermographic Analysis of a Bridge Power Converter

V. Andonova Anna; L. Hinov Nikolay

doi:10.2478/jee-2014-0060

.blurhash-client-img { display: none !important; }

Thermographic Analysis of a Bridge Power Converter

Journal of Electrical Engineering

Volume 65 (2014): Issue 6 (November 2014)

By: V. Andonova Anna and L. Hinov Nikolay

Open Access

|Jan 2015

Abstract

Any loss of power in converters is dissipated as heat in the components of the circuit. The article presents a new approach to measuring heat dissipation in a bridge power converter with hard switches using infrared thermography. Parallel measurements by thermocouples have been carried out. The experimental results are compared and used from the both cases. The proposed approach can be used for various circuit implementations of the converters in a similar manner.

References

[1] MOHAN, N.–UNDELAND, T. M.–ROBBINS, W. P.: Power Electronics: Converters, Applications, and Design, John Wiley & Sons, New Jersey, 2003, pp. 10-35.
Search in Google Scholar
[2] STUPAR, A.–BORTIS, D.–DROFENIK, U.–KOLAR, J. W.: Advanced Setup for Thermal Cycling of Power Modules following Definable Junction Temperature Profiles, Proceedings of ECCE, Sapporo, Japan, June 21-24, 2010, pp. 962-969.10.1109/IPEC.2010.5542179
Search in Google Scholar
[3] ZHANG, M.–JOVANOVIC, M.–LEE, F.: Design and Analysis of Thermal Management for High-Power-Density Converters in Sealed Enclosures, Proceedings of APEC, Twelfth Annual, vol. 1, Atlanta, GA, 1997, pp. 23-27.
Search in Google Scholar
[4] BASIC, M.–VUKADINOVIC, D.–POLIC, M.: Analysis of Power Converter Losses in Vector Control System of a Self-Excited Induction Generator, Journal of Electrical Engineering 65 No. 2 (2014), 65-74.10.2478/jee-2014-0010
Search in Google Scholar
[5] Application Note AN-949, International Rectifier, July 2012 http://www.irf.com/technical-info/appnotes/an-949.pdf.
Search in Google Scholar
[6] SALEM, T. E.–IBITAYO, D.–GEIL, B. R.: Validation of Infrared Camera Thermal Measurements on High-Voltage Power Electronic Components, Instrumentation and Measurement, IEEE Transactions on 56 No. 5 (2007), 1973-1978.
Search in Google Scholar
[7] MACARIOS, T.–BARBOSA, J.: 22nd International Congress of Mechanical Engineering (COBEM 2013), Nov. 3-7, Ribeirao Preto, Brazil, 2013, pp. 9670-9678.
Search in Google Scholar
[8] BIELA, J.–KOLAR, J. W.: IEEJ Transactions on Industry Applications (Section D) 128-D No. 4 (2008), 1-8.
Search in Google Scholar
[9] DROFENIK, U.–KOLAR, J. W.: Analyzing the Theoretical Limits of Forced Air-Cooling by Employing Advanced Composite Materials with Thermal Conductivities > 400 W/mK, Proceedings of CIPS, Naples, Italy, June 7-9, 2006, pp. 323-328.
Search in Google Scholar
[10] TARVYDAS, P.–NOREIKA, A.–STALIULIONIS, Z.: Analysis of Heat Sink Modelling Performance, Electronics and Electrical Engineering 19 No. 3 (2013), 43-46.
Search in Google Scholar
[11] DODGE, J.: Power MOSFET Tutorial; http://www.microsemi.com/document-portal/doc_view/ 14692-mosfet-tutorial, Advanced Power Technology, Application Note APT-0403 Rev B, March 2, 2006.
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.2478/jee-2014-0060 | Journal eISSN: 1339-309X | Journal ISSN: 1335-3632

Journal RSS Feed

Language: English

Page range: 371 - 375

Submitted on: Dec 5, 2013

Published on: Jan 31, 2015

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 6 issues per year

Keywords:

Related subjects:

Introductions and overviews,

Engineering, other

© 2015 V. Andonova Anna, L. Hinov Nikolay, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 65 (2014): Issue 6 (November 2014)