References
- BAECHER G. B., CHRISTIAN J.T., “Reliability and Statistics in Geotechnical Engineering”, John Wiley & Sons Ltd., 2003, ISBN: 0-471-49833-5
- BASSETT, R., “A Guide to Field Instrumentation in Geotechnics: Principles, Installation and Reading”, CRC Press, 2011.(1st ed.) https://doi.org/10.1201/b15432
- LEROUEIL S., LOCAT J., “Slope movements - Geotechnical characterization, risk assessment and mitigation”, In: Proceedings of the sixth Danube- Europaen Conference on Soil Mechanics and Geotechnical Engineering, Porec, Croatia, 25–29 May 1998, pp. 95–106. ISBN: 90-5410-957-2 https://doi.org/10.1201/9781003078173-6
- HORVATH T., “Geotechnical Investigation and Risk Assessment at Budapest Metro Line 4”, In: 1 st International Congress on Tunnels and Underground Structures in South – East Europe „USING UNDERGROUND SPACE” Croatia, 2011.
- National Atomic Energy Office, “Safeguards supervision of nuclear facilities, nuclear and other radioactive materials, ionizing radiation generating equipment”, [online] Available at: https://www.haea.gov.hu/web/v3/oahportal.nsf/web?openagent&menu=02&submenu=2_3 [Accessed: 4th May 2023;
- International Atomic Energy Agency, “Guidelines for integrated risk assessment and management in large industrial areas”, Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems (IAEA-TECDOC--994), 1998.
- FABER MH. “Risk and safety in civil, environmental and geomatic engineering”, Lecture notes, Swiss Federal Institute of Technology, ETH Zurich, Switzerland, 2008.
- WHITMAN R. V. “Evaluating calculated risk in geotechnical engineering”, Journal of Geotechnical Engineering, 110-2, pp. 145–188, 1984. https://doi.org/10.1061/(ASCE)0733-9410(1984)110:2(143)
- BRIAUD J-L, “Failure has consequences”, Geostrata Magazine, 24(1), pp.18–20, 2022. https://doi.org/10.1061/geosek.0000047
- SEBESTYÉN, Z., TÓTH, T., “A Revised Interpretation of Risk in Project Management”, Periodica Polytechnica Social and Management Sciences, 22(2), pp. 119–128., 2014. https://doi.org/10.3311/PPso.7740
- RAUL B. REBAK, “Iron-chrome-aluminum alloy cladding for increasing safety in nuclear power plants”, EPJ Nuclear Sciences Technologies, 3(34), 2017 https://doi.org/10.1051/epjn/2017029
- KAROLYI GY., “Architectural and civil engineering aspects of nuclear safety requirements”, BME, Web lecture, Budapest, Hungary
- International Atomic Energy Agency, “Assessment of Defence in Depth for Nuclear Power Plants”, Safety Reports Series No. 46, IAEA, Vienna, 2005. ISBN: 92-0-114004-5
- WAN W., “Nuclear Risk Reduction: A Framework for Analysis”, UNIDIR, Geneva, Switzerland, 2019. https://doi.org/10.37559/WMD/19/NRR01.
- KÖHLER J., “Risk and Safety in Engineering”, Web lectures, Swiss Federal Institute of Technology, ETH Zurich, Switzerland
- CRETU O., STEWART R., BERENDS T., “Risk Management for Design and Construction”, John Wiley & Sons Ltd., 2011. ISBN: 978-0-470-63538-4 https://doi.org/10.1002/9781118984017
- PAP, M., MAHLER, A. “Comparison of Different Empirical Correlations to Estimate Permeability Coefficient of Quaternary Danube Soils”, Periodica Polytechnica Civil Engineering, 63(1), pp. 25–29, 2019 https://doi.org/10.3311/PPci.13108
- KÁPOLNAINÉ NAGY-GÖDE, F., TÖRÖK AKOS “Types of Landslides along Lake Balaton Hungary”, Periodica Polytechnica Civil Engineering, 66(2), pp. 411–420, 2022, https://doi.org/10.3311/PPci.18615