References
- Akbas, S. D., 2018. Nonlinear thermal displacements of laminated composite beams. Coupled System Mechanics, 7 (6), pp. 691-705. https://doi.org/10.12989/csm.2018.7.6.691.
- Avhad, P. V., Sayyad, A. S. 2022. On the deformation of laminated composite and sandwich beams. Curved and Layer, Struct 9, pp. 1-12.
- Bouazza, M., Benseddig, N., Zankour, A.M. 2018. Thermal buckling analysis of laminated composite beams using hyperbolic refined shear deformation theory. J Therm Stress 42, pp. 332-340.
- Ghugal, Y. M., Kulkarni, S. K. 2013. Flexural analysis of cross play laminated plates subjected to nonlinear thermal and mechanical loadings. Acta Mechanica. 224, pp. 675-690.
- Ghugal, Y. M., Kulkarni, S. K., Borate, R. D. 2023. Flexural response of cross ply laminated beams subjected to combined thermal and transverse mechanical loads. Acta Mechanica. 234, pp. 3725-3735.
- Ghugal, Y. M., Ruoccc, E., Gajbhiye, P. D., Bhaiya, V., Yelve, N. P. 2023. Stress analysis of laminated and sandwich beams subjected to concentrated load by using quasi-two-dimensional theory. Int. J. Computational Materials Science and Engineering DOI: 10.1142/S204768412350046X.
- Ghumare, S. M., Sayyad. A. S. 2017. A new fifth order shear and normal deformation theory for static bending and elastic buckling of P-FGM beams. Latin American J. Solid and Struct 14, pp. 1893-1911.
- Hai, Q., Ding, Z., Wei-qing, L., Hai, F. 2015. Elasticity solution of laminated beams subjected to thermo-loads. J. Cent. South Univ. 22, pp. 2297-2305.
- Khdeir, A. A. 2001. Thermal buckling of cross ply laminated composite beams. Acta Mechanica. 149, pp. 201-213.
- Kulkarni, S. K., Ghugal, Y. M. 2015. Effect of degree of orthotropy on transverse deflection of composites under thermal load. Advances in Structural Engineering. DOI 10.1007/978-81-322-2190-6_15.
- Naik, N. S., Sayyad, A. S. 2020. 1 D Thermal analysis of laminated composite and sandwich plates using a new fifth order shear and normal deformation theory. Materials Today Proceedings. 21, pp. 1084-1088.
- Naik, N. S., Sayyad, A. S., 2021. Higher order displacement model for cylindrical bending of laminated and sandwich plates subjected to environmental loads. Mechanics of Advanced Composite Structures, 8 (1), pp. 185-201.
- Patel, M., Daynes, S., Wang, C. H., 2024. The influence of orthotropy and taper angle on the compressive strength of composite laminates with scarfed holes. Advanced Material Research, 891.
- Qian, H., Qiu, Y., Lu, C., Yang, Y., Sha, X. 2022. Thermal analysis for clamped laminated beams with non-uniform temperature boundary conditions. Thin Walled Structures 179, 109693 DOI: https://doi.org/10.1016/j.tws.2022.109693.
- Sayyad, A. S., Avhad, P. V. 2022. Higher order model for the thermal analysis of laminated composite, sandwich and functionally graded curved beams. J. Thermal Stresses. 45, pp. 382-400. https://doi.org/10.1080/01495739.2022.2050476.
- Sayyad, A. S., Ghugal, Y. M., Naik, N. S. 2015. Bending analysis of laminated composite and sandwich beams according to refined trigonometric beam theory. Curved and Layer, Struct 2, pp. 279-289.
- Tylikowski, A., Hetnarski, R. B., 1996. Thermally induced Instability of laminated beams and plates. Journal of Applied Mechanics, 63 (4), pp. 884-890.
- Vidal, P., Polit, O., 2006. A thermomechanical finite element for the analysis of rectangular laminated beams. Finite Elements in Analysis and Design, 42 (10), pp. 868-883 Doi: 10.1016/j.finel.2006.01.005.
- Vidal, P., Polit, O., 2009. A refined sine-based finite element with transverse normal deformation for analysis of laminated beams under thermomechanical loads. Journal of Mechanics of Materials and Structures, 4 (6), pp. 1127-1155 http://dx.doi.org/10.2140/jomms.2009.4.1127.
- Vilar, M. M. S., Masjedi, P. K., Hadjiloizi, D. A., Weaver, P. M., 2023. Analytical interlaminar stresses of composite laminated beams with orthotropic tapered layers. Composite Structures, 319 (1), https://doi.org/10.1016/j.compstruct.2023.117063.