Have a personal or library account? Click to login
Studies on the Influence of Temperature and Frequency on the Stiffness Module for Airport Asphalt Mixtures Cover

Studies on the Influence of Temperature and Frequency on the Stiffness Module for Airport Asphalt Mixtures

Open Access
|May 2024

References

  1. Adelin Stirb, Paul Marc and Andrei Forton, Aspects concerning the physical-mechanical characteristics of low-noise asphalt mixture, Romanian Journal of Transport Infrastructure, VOLUME 11, ISSUE 1 (JULY 2022), pp. 1-13 DOI: https://doi.org/10.2478/rjti-2022-0004
  2. Applied Research Associates: Auburn, AL, USA: Life Cycle Cost Analysis for Airport Pavements, Airfield Asphalt Pavement Technology Program (AAPTP) Report 06-06; 2011.
  3. ASTM (1997), Test method for indirect tension test for resilient modulus for bituminous mixtures, D 4123-82 (1995), Annual Books of ASTM Standards, Section 4, Vol.04.03, Road Paving Materilas; Vehicle-Pavement Systems.
  4. Babashamsi, P.; Yusoff, N.I.; Ceylan, H.; Nor, N.G.; Salarzadeh Jenatabadi, H. Sustainable Development Factors in Pavement Life-Cycle: Highway/Airport Review. Sustainability 2016, 8, 248. [Google Scholar] [CrossRef][Green Version].
  5. Baldo, N.; Manthos, E.; Miani, M. Stiffness modulus and marshall parameters of hot mix asphalts: Laboratory data modeling by artificial neural networks characterized by cross-validation. Appl. Sci. 2019, 9, 3502. [Google Scholar] [CrossRef][Green Version].
  6. Baldo N., Miani M., Rondinella F., Valentin J., Vackcová P., Manthos E., Stiffness Data of High-Modulus Asphalt Concretes for Road Pavements: Predictive Modeling by Machine-Learning, Journal MDPI, volume 12, issue 1, 2022, https://doi.org/10.3390/coatings12010054.
  7. Espersson, M. Effect in the high modulus asphalt concrete with the temperature. Constr. Build. Mater. 2014, 71, 638–643. [Google Scholar] [CrossRef].
  8. Gusti Made Bagus Baskara, Ervina Ahyudanari, I Nyoman Arya Thanaya, Analysis of Stiffness Modulus of Asphalt Concrete Mixture by Using Artificial Aggregates, JURNAL TEKNIK ITS Vol. 8, No. 2, (2019) ISSN: 2337-3539 (2301-9271 Print).
  9. Graziani, A.; Mignini, C.; Bocci, E.; Bocci, M. Complex modulus testing and rheological modeling of cold-recycled mixtures. J. Test. Eval. 2019, 48, 120–133. [Google Scholar] [CrossRef].
  10. Imam Aschuri, The stiffness modulus of asphalt concrete for design life prediction of pavement under tropical condition, Proceeding The 1st PhD Seminar on Civil Engineering, Bandung 14 April 2004, ISBN : 979-98539-1-5.
  11. Lee, H.J.; Lee, J.H.; Park, H.M. Performance evaluation of high modulus asphalt mixtures for long life asphalt pavements. Constr. Build. Mater. 2007, 21, 1079–1087. [Google Scholar] [CrossRef].
  12. Li N., Asphalt Mixture Fatigue Testing; Influence of Test Type and Specimen Size, PhD, The Netherlands: Delft University of Technology, Delft, 2013.
  13. Lubis A., Muis Z. A., Iskandar T. D., The study of stiffness modulus values for AC-WC pavement, IOP Conf. Ser. Mater. Sci. Eng., vol. 309, pp. 1–7, 2018.
  14. Ma, X.; Leng, Z.; Wang, L.; Zhou, P. Effect of reclaimed asphalt pavement heating temperature on the compactability of recycled hot mix asphalt. Materials (Basel). 2020, 13, 1–13. [Google Scholar] [CrossRef].
  15. Mamlouk M.; Sarofim R. T. Modulus of asphalt mixtures-an unresolved dilemma, Transportation Research Record 1988, 193-198.
  16. Olard, F. and M.R.M. a; Di Benedetto, H. General “2S2P1D” Model and Relation Between the Linear Viscoelastic Behaviours of Bituminous Binders and Mixes. Road Mater. Pavement Des. 2003, 4, 185–224. [Google Scholar].
  17. Poot M. R., Van de Ven M. F. C., Cocurullo A., Asphalt Testing, Practical Manual CT 4830 ed: TU Delft, 2008.
  18. Pramesti F. P., Poot M. R., Van de Ven M. F. C., Molenaar A. A. A., Determining stiffness modulus by means of different mechanical testing, IOP Conference Series: Materials Science and Engineering, Volume 615, 7th International Conference on Euro Asia Civil Engineering Forum 30 September to 2 October 2019, Stuttgart, Germany.
  19. Pramesti F. P., Molenaar A., Van de Ven M. F., Characterizing Cracking and Permanent Deformation; an Attempt for Predicting the End of the Structural Pavement Life, 2017, Procedia engineering 171 1395-1404.
  20. Peyman Babashamsi, Shabir Hussain Khahro, Hend Ali Omar, Abdulnaser M. Al-Sabaeei, Abdul Muhaimin Memon, Abdalrhman Milad, Muhammad Imran Khan, Muslich Hartadi Sutanto, Nur Izzi Md Yusoff, Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance, Sustainability 2022.
  21. Peyman Babashamsi, Shabir Hussain Khahro, Hend Ali Omar, Abdulnaser M. Al-Sabaeei, Abdul Muhaimin Memon, Abdalrhman Milad, Muhammad Imran Khan, Muslich Hartadi Sutanto, Nur Izzi Md Yusoff, Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance, Sustainability 2022, 14(5), 2905; https://doi.org/10.3390/su14052905.
  22. Prosperi E., Bocci E., Bocci M., Effect of Bitumen Production Process and Mix Heating Temperature on the Rheological Properties of Hot Recycled Mix Asphalt, Sustainability 2022, 14(15), 9677; https://doi.org/10.3390/su14159677.
  23. Walubita L F, Alvarez A E and Simate G S 2011 Evaluating and comparing different methods and models for generating relaxation modulus master-curves for asphalt mixes Construction and Building Materials 25 2619-2626.
  24. White G., State of the art: Asphalt for airport pavement surfacing, International Journal of Pavement Research and Technology 2018, 11, 77–98.
  25. Widyatmoko I., Richardson J., Ferguson C., Long-term monitoring of high performance airfield pavement surfacing, Int. J. Pavement Res. Technol., 6 (5) (2013), pp. 582-587.
Language: English
Page range: 147 - 152
Submitted on: Jan 16, 2024
Accepted on: Feb 28, 2024
Published on: May 20, 2024
Published by: University of Oradea, Civil Engineering and Architecture Faculty
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year

© 2024 Claudia Petcu, Carmen Răcănel, A. Burlacu, published by University of Oradea, Civil Engineering and Architecture Faculty
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.