Efficiency Improvement of a Centrifugal Compressor Stage with the Parametric Optimization of the Impeller Blades
By:
References
- Baturin O.V., Kolmakova D.A., Matveev V.N., Popov G.M., 2013. Designing a centrifugal compressor using IOSO optimization technology: Samara State Aerospace University named after academician S.P. Korolev, pp.66 (in Russian).
- Cherkasskiy V. M., 1984. Pumps, fans, compressors, 2nd ed.; Rev. and add., Energoatomizdat: Moscow, USSR; pp.416 (in Russian).
- Emre, S., Cadirci, S., 2022. Investigation of Suction Flow Control on Centrifugal Compressor with Vaned Diffuser. Energies, 15(2), 583, pp. 1-12.10.3390/en15020583
- Galerkin, Yu.B., Rekstin, A.F., Drozdov, A.A., Soldatova, K.V., Solovieva, O.A., Popova, E.Yu, 2020. Design of centrifugal compressors based on the universal modeling method. Int. J. Scientific and technical collection NEWS OF GAS SCIENCE, 2(44), pp. 92–110 (in Russian).
- Ghoreyshi, S.M., 2018. Development of an Ultra-high Efficiency Gas Turbine Engine (Uhegt) with Stator Internal Combustion: Design, Off-design, and Nonlinear Dynamic Operation. A dissertation in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Mechanical Engineering, the Office of Graduate and Professional Studies of Texas A&M University.10.1115/GT2019-90583
- Jiang S.P.K., 2018. Design of a high-performance centrifugal compressor with new surge margin improvement technique for high velocity turbomachinery, Propulsion and Power Research, 7(1), pp. 19-29.10.1016/j.jppr.2018.02.004
- Kalinkevych M., Ihnatenko V, Bolotnikova O, Obukhov O., 2018. Design of high efficiency centrifugal compressors stages. Refrigeration Equipment and Technology, 54(5), pp. 4‒9.10.15673/ret.v54i5.1239
- Kalwar, F. A., Kurdziel, K., Pytel, S., Gumula, M., Lobur, Melnyk M. M., 2020. The use of information systems for regulation of gas engine operating parameters [CAD in machinery design: implementation and educational issues (CADMD 2020)] 26th -27th November, Lviv, Ukraine. pp. 1-9.10.1088/1757-899X/1016/1/012020
- Kim, J.-H., Choi, J.-H. and Kim, K.-Y. 2010. Surrogate modeling for optimization of a centrifugal compressor impeller’, International Journal of Fluid Machinery and Systems, 3 (1), pp. 29‒38.10.5293/IJFMS.2010.3.1.029
- Kondratenko Y.P., Kozlov O.V., 2012. “Mathematic Modeling of Reactor’s Temperature Mode of Multiloop Pyrolysis Plant”, Modeling and Simulation in Engineering, Economics and Management, Lecture Notes in Business Information Processing, Vol. 115, pp. 178-187.10.1007/978-3-642-30433-0_18
- Kondratenko, Y.P., Topalov, A.M., Kozlov, O.V., 2019. Simulation of the Initial Stability of the Floating Dock for the List and Trim Stabilization Tasks. PROBLEMELE ENERGETICII REGIONALE, 1-2 (41), pp. 12-24 (in Russian).
- Lyashkov V. I., 2005. Theoretical foundations of heat engineering, Publishing house mechanical-1: Moscow, RF, pp. 260 (in Russian).
- Mangani L., Casartelli E., Mauri S., 2012. Assessment of Various Turbulence Models in a High Pressure Ratio Centrifugal Compressor with an Object Oriented CFD Code. J. Turbomach, 134, pp. 11.10.1115/1.4006310
- Medic, G., Sharma, Om P., Jongwook, J., Hardin, L. W., McCormick D.C., Cousins, W. T., Lurie, E. A., Shabbir A., Holley B. M., and Van Slooten, P. R., 2014 High Efficiency Centrifugal Compressor for Rotorcraft Applications. United Technologies Research Center, East Hartford, Connecticut; pp. 316.
- Mojaddam, M. and Pullen, K.R. 2019. Optimization of a centrifugal compressor using the design of experiment technique’, Applied Sciences, 9, 291, pp. 1‒20.10.3390/app9020291
- Seleznyov K.P., Podobuev Yu.S, Anisimov S.A., 1968. Theory and calculation of turbocompressors, Mechanical engineering: Leningrad, USSR; pp. 406 (in Russian).
- Seyed Amir Hosein Jafari, Kosasih P. B., 2014. Analysis of the power augmentation mechanisms of diffuser shrouded micro turbine with computational fluid dynamics simulations. Wind and Structures An International Journal, 19 (Number 2), pp. 199-217.10.12989/was.2014.19.2.199
- Stansel D.M., 2018. Gas turbine emissions improvements by advances in design, analysis, materials, manufacturing, and control technology. [Proc. of the 47th Turbomachinery & 34th Pump Symposia, George R. Brown Convention Centre], Houston, Texas, pp.20.
- Strahovich K.I., Frenkel M.I., Kondryakov I.K., Ris V.F., 1961.Compressor machines, State publishing house of trade literature Moscow, USSR; pp.600 (in Russian).
- Van Ness H. C., 1983. Understanding Thermodynamics, Dover ed. edition, Dover Publications: Mineola, New York, pp. 128.
- Wan, Y., Guan, J., Xu, S., 2017. Improved empirical parameters design method for centrifugal compressor in PEM fuel cell vehicle application. International Journal of Hydrogen Energy, 42, pp. 5590-5605.10.1016/j.ijhydene.2016.08.162
- Xie H., Song M., Liu X., Yang B., Gu C., 2018. Research on the simplified design of a centrifugal compressor impeller based on meridional plane modification. Applied Sciences, 8, 1339, pp. 1-16.10.3390/app8081339
DOI: https://doi.org/10.2478/jaes-2022-0021 | Journal eISSN: 2284-7197
Language: English
Page range: 159 - 166
Submitted on: Aug 19, 2022
Accepted on: Sep 10, 2022
Published on: Dec 21, 2022
Published by: University of Oradea, Civil Engineering and Architecture Faculty
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2022 N. Ben, S. Ryzhkov, A. Topalov, O. Gerasin, G. Yan, Xiaolin Yan, Anna Aleksieieva, published by University of Oradea, Civil Engineering and Architecture Faculty
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.