References
- Genadij, Sh. and Juris, B. “Concrete mix design & Optimazation”, 2nd Int. Ph.D. Symp. in Civil Eng., Budapest, (1998).
- Rahmani, K., Ghaemian, M. and Hosseini, A. “Experimental study of the effect of water to cement ratio on mechanical and durability properties of Nano-silica concretes with Polypropylene fibers” Scientia Iranica, In Press, (2018).
- Newlon, H.H.Jr. “Long - Term performance of concrete containing hydrated hydraulic lime as an admixture”, In Virginia Highway & Transportation Research Council, United States, Federal Highway Administration, (1976).
- Mehta, P.K. “Concrete in the marine environment”, In Elsevier Applied Science, London and New York, (1991).
- Kwan, A.K.H. and Mora, C. F. “Effect of various shape parameters on packing of aggregate particles”, Mag. of Conc. Res., 53(2), pp. 91–100, (2001).
- Carter, R.M. and Yan, Y. “Measurement of particle shape using digital imaging echniques” J. of Phy.: Conf. Ser., pp. 177-182, (2005).
- Lee, S.T., Moon, H.Y. and Swamy, R.N. “Sulfate attack and role of silica fume in resisting strength loss” Cem. and Conc. Comp., 27(1), pp. 65–76, (2005).
- Torii, K. and Kawamura, M. “Effects of fly ash and silica fume on the resistance of mortar to sulfuric acid and sulfate attack” Cem. and Conc. Res., 24(2), pp. 361-370, (1994).
- Faleschini, F., Zanini, M.A., Brunelli, K. and Pellegrino, C. “Valorization of co-combustion fly ash in concrete production”, Mat. and Des., 85, pp. 687-694, (2015).
- Ferrándiz-Mas, V., Sarabia, L.A., Ortiz, M.C., Cheeseman, C.R. and García-Alcocel, E. “Design of bespoke lightweight cement mortars containing waste expanded polystyrene by experimental statistical methods”, Mat. and Des., 89, pp. 901-912, (2016).
- Mármol, G., Savastano, H., Tashima, M. M. and Provis, J.L. “Optimization of the MgOSiO2 binding system for fiber-cement production with cellulosic reinforcing elements”, Mat. and Des., 105, pp. 251-261, (2016).
- Zhang, P. and Li, Q.-F. “Combined Effect of Silica Fume and Polypropylene Fiberon Drying Shrinkage Properties of Concrete Composites Containing Fly Ash”, Scientia Iranica, 20(5), pp. 1372-1380, (2013).
- Mirsayar, M., Shi, X., Zollinger, D. “Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen”, Eng. Solid Mech., 5(4), pp. 293-306, (2017).
- Jafari, Kh., Tabatabaeian, M., Joshaghani, A. and Ozbakkaloglu, T. “Optimizing the mixture design of polymer concrete: An experimental investigation”, Const. and Build. Materials, 167, pp. 185-196, (2018).
- Unterweger, C., Brüggemann, O. and Fürst, C. “Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites”, Combust. Sci. Technol., 13, pp. 49–55 (2014).
- Unterweger, C., Brüggemann, O. and Fürst, C. “Synthetic fibers and thermoplastic short-fiber-reinforced polymers: properties and characterization”, Polym. Compos., 35, pp. 227–236 (2014).
- Ozawa, M. and Morimoto, H. “Effects of various fibres on high-temperature spalling in high-performance concrete”, Constr. and Build. Mater., 71, pp. 83–92, (2014).
- Kodur, V. “Properties of concrete at elevated temperatures”, ISRN Civ. Eng., 2014, pp. 1–15, (2014).
- Rahmanzadeh, B., Rahmani, K. and Piroti, S. “Experimental study of the effect of water-cement ratio on compressive strength, abrasion resistance, porosity and permeability of Nano silica concrete”, Frattura ed Integrità Strutturale, 44, pp. 16-24, (2018).
- Yazıcı, H. “The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete” Constr. and Build. Mater., 22(4), pp. 456–462, (2008).
- Song, H.W., Jang, J.W., Saraswathy, V. and Byun, K.J. “An estimation of the diffusivity of silica fume concrete” Build. and Environ., 42(3), pp. 1358–1367, (2007).