References
- M. N. Lyutikova, S. M. Korobeynikov, U. M. Rao, and S. Member, “Mixed Insulating Liquids With Mineral Oil for High-Voltage Transformer Applications: A Review,” IEEE Trans. Dielectr. Electr. Insul., vol. 29, no. 2, pp. 454–461, 2022, doi: 10.1109/TDEI.2022.3157908.
- J. Jiang, X. Wu, Z. Wang, C. Zhang, G. Ma, and X. Li, “Moisture Content Measurement in Transformer Oil Using Micro-nano Fiber,” IEEE Trans. Dielectr. Electr. Insul., vol. 27, no. 6, pp. 1829–1836, 2020, doi: 10.1109/TDEI.2020.008885.
- M. Mandlik and T. S. Ramu, “Moisture Aided Degradatiom of Oil Impregnated Paper Insulation in Power Transformers,” IEEE Trans. Dielectr. Electr. Insul., vol. 21, no. 1, pp. 186–193, 2014.
- S. A. Wani, M. M. Nezami, S. A. Khan, and S. Sohail, “A Capacitive Sensor for Detecting Insulation Degradation by Sensing 2-FAL in Transformer Oil,” IEEE Trans. Dielectr. Electr. Insul., vol. 27, no. 6, pp. 2179–2187, 2020, doi: 10.1109/TDEI.2020.008889.
- T. Islam, Z. Tehseen, and L. Kumar, “Highly sensitive thin-film capacitive sensor for online moisture measurement in transformer oil,” IET Sci. Meas. Technol., vol. 14, no. 4, pp. 416–422, 2020, doi: 10.1049/iet-smt.2019.0319.
- O. Rahman, T. Islam, S. Member, N. Khera, and S. A. Khan, “A Novel Application of the Cross-Capacitive Sensor in Real-Time Condition Monitoring of Transformer Oil,” IEEE Trans. Instrum. Meas., vol. 70, pp. 1–12, 2021.
- O. Rahman, T. Islam, A. Ahmad, S. Parveen, N. Kheraand, and S. A. Khan, “Cross Capacitance Sensor for Insulation Oil Testing,” IEEE Sens. J., vol. 21, no. 18, pp. 20980–20989, 2021, doi: 10.1109/JSEN.2021.3096463.
- J. Kelly, “Transformer Fault Diagnosis by Dissolved-Gas Analysis,” IEEE Trans. Ind. Appl., vol. IA-16, no. 6, pp. 777–782, 1980, doi: 10.1109/TIA.1980.4503871.
- B. Pahlavanpour and G. Duffy, “Development of a rapid spectrophotometry method for analysis of furfuraldehyde in transformer oil as an indication of paper ageing,” in Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, 1993, no. 6, pp. 493–498. doi: 10.1109/ceidp.1993.378924.
- A. Rico-Yuste, V. González-Vallejo, E. Benito-Peña, T. De Las Casas Engel, G. Orellana, and M. C. Moreno-Bondi, “Furfural Determination with Disposable Polymer Films and Smartphone-Based Colorimetry for Beer Freshness Assessment,” Anal. Chem., vol. 88, no. 7, pp. 3959–3966, 2016, doi: 10.1021/acs.analchem.6b00167.
- W. Zhang and D. J. Webb, “PMMA Based Optical Fiber Bragg Grating for Measuring Moisture in Transformer Oil,” IEEE Photonics Technol. Lett., vol. 28, no. 21, pp. 2427–2430, 2016, doi: 10.1109/LPT.2016.2598145.
- X. B. Li, S. D. Larson, A. S. Zyuzin, and A. V Mamishev, “Design Principles for Multichannel Fringing Electric Field Sensors,” IEEE Sens. J., vol. 6, no. 2, pp. 434–440, 2006.
- R. Igreja and C. J. Dias, “Analytical evaluation of the interdigital electrodes capacitance for a multi-layered structure,” Sensors Actuators A, vol. 112, pp. 291–301, 2004, doi: 10.1016/j.sna.2004.01.040
- M. M. Nezami, S. A. Wani, S. A. Khan, N. Khera, and S. Sohail, “An MIP-Based Novel Capacitive Sensor to Detect 2-FAL Concentration in Transformer Oil,” IEEE Sens. J., vol. 18, no. 19, pp. 7924–7931, 2018, doi: 10.1109/JSEN.2018.2864793.
- S. Laskar and S. Bordoloi, “Monitoring of Moisture in Transformer Oil Using Optical Fiber as Sensor,” J. Photonics, vol. 2013, pp. 1–7, 2013, doi: 10.1155/2013/528478.
- N. Cennamo, L. De Maria, C. Chemelli, A. Profumo, L. Zeni, and M. Pesavento, “Markers Detection in Transformer Oil by Plasmonic Chemical Sensor System Based on POF and MIPs,” IEEE Sens. J., vol. 16, no. 21, pp. 7663–7670, 2016, doi: 10.1109/JSEN.2016.2603168.
- T. Islam, O. P. Maurya, and A. U. Khan, “Design and Fabrication of Fringing Field Capacitive Sensor for Non-contact Liquid Level Measurement,” IEEE Sens. J., vol. 21, no. 21, pp. 24812–24819, 2021, doi: 10.1109/JSEN.2021.3112848.
- N. Y. Ã, G. Sakai, and K. Shimanoe, “Oxide semiconductor gas sensors,” Catal. Surv. from Asia, vol. 7, no. 1, pp. 63–75, 2003.
- J. Zhang et al., “Hierarchically Porous ZnO Architectures for Gas Sensor Application & DESIGN 2009,” Cryst. Growth Des., vol. 9, no. 8, pp. 3532–3537, 2009.
- P. Rai, S. Raj, K. Ko, K. Park, and Y. Yu, “Sensors and Actuators B : Chemical Synthesis of flower-like ZnO microstructures for gas sensor applications,” Sensors Actuators B. Chem., vol. 178, no. 2, pp. 107–112, 2013, doi: 10.1016/j.snb.2012.12.031.
- M. A. Franco, P. P. Conti, R. S. Andre, and D. S. Correa, “A review on chemiresistive ZnO gas sensors,” Sensors and Actuators Reports, vol. 4, no. March, p. 100100, 2022, doi: 10.1016/j.snr.2022.100100.
- R. Kumar, G. Kumar, and A. Umar, “Zinc Oxide Nanostructures for NO 2 Gas – Sensor Applications :,” Nano-Micro Lett., vol. 7, no. 2, pp. 97–120, 2015, doi: 10.1007/s40820-014-0023-3.
- M. Que, C. Lin, J. Sun, L. Chen, X. Sun, and Y. Sun, “Progress in ZnO Nanosensors,” Sensors, vol. 21, pp. 1–22, 2021.
- M. Kumar, V. S. Bhati, S. Ranwa, J. Singh, and M. Kumar, “Pd/ZnO nanorods based sensor for highly selective detection of extremely low concentration hydrogen,” Sci. Rep., vol. 7, no. 1, pp. 1–9, 2017, doi: 10.1038/s41598-017-00362-x.
- V. S. Bhati, M. Hojamberdiev, and M. Kumar, “Enhanced sensing performance of ZnO nanostructures-based gas sensors: A review,” Energy Reports, vol. 6, no. xxxx, pp. 46–62, 2020, doi: 10.1016/j.egyr.2019.08.070.
- Z. H. Zargar and T. Islam, “A Novel Cross-Capacitive Sensor for Noncontact Microdroplet Detection,” IEEE Trans. Ind. Electron., vol. 66, no. 6, pp. 4759–4766, 2019, doi: 10.1109/TIE.2018.2863205.