Light intensity measurement using LabVIEW graphical programming environment

References

[1] Bogdan M., „Light Intensity Control Using Arduino and LabVIEW”, Proceedings of the 13th International Conference on Virtual Learning (ICVL 2018), ISSN: 1844-8933 - ISI Proceedings, p. 306-310, October 26-27, 2018.
Search in Google Scholar Back to article
[2] Bogdan M., „Virtual signal generator using the NI-USB 6008 data acquisition”, Nonconventional Technologies Review, 2013.
Search in Google Scholar Back to article
[3] Hedeşiu H., C., Programarea Grafică în Sisteme cu Maşini Electrice. Simulare, Măsurare şi Testare în Timp Real, TEZĂ DE ABILITARE, Departamentul de Maşini şi Acţionări Electrice Facultatea de Inginerie Electrică, 2017.
Search in Google Scholar Back to article
[4] https://www.omega.com/en-us/resources/shining-a-light-on-intensity-measureme
Search in Google Scholar Back to article
[5] https://www.arduino.cc
Search in Google Scholar Back to article
[6] https://components101.com/diodes/bpw34-photodiode
Search in Google Scholar Back to article
[7] https://epe.utcluj.ro/SCTR_2020/Lab_V_2020.pdf
Search in Google Scholar Back to article
[8] https://www.ni.com/ro-ro/support/documentation/supplemental/06/ni-visa-overview.html
Search in Google Scholar Back to article
[9] http://sine.ni.com/nips/cds/view/p/lang/ro/nid/209002
Search in Google Scholar Back to article
[10] https://www.labviewmakerhub.com/
Search in Google Scholar Back to article