Simulation of fiber movement in the high speed vortex during the rotor spinning process

Ruihua Yang; Xinxia Gong

doi:10.2478/ftee-2024-0031

.blurhash-client-img { display: none !important; }

Simulation of fiber movement in the high speed vortex during the rotor spinning process

Fibres & Textiles in Eastern Europe

Volume 32 (2024): Issue 6 (December 2024)

By: Ruihua Yang and Xinxia Gong

Open Access

|Dec 2024

Abstract

A physical model of the air extraction rotor spinning channel was established in SolidWorks 2018 to explore the movement of the fiber in the rotor and the fiber transport channel. A fiber model was built using EDEM2018. Using the coupling software Fluent 19.0 and EDEM2018, a numerical analysis of the movement of fibers in the fiber transport channel and rotor was carried out. The research in this study provides a strong theoretical basis and technical support for further development of new rotor-spun yarns and optimization of key components with a short spinning process, high yarn-forming efficiency, and strong fiber adaptability.

References

G.A. Demiroz, E. Oner, Investigation of the quality properties of open end spun recycled yarns made from blends of recycled fabric scrap wastes and virgin polyester fibre, J. Text. Inst. 110(11) (2019)569–1579.
Search in Google Scholar Back to article
R.H. Yang, C. He, H.X. Zhong, Effects of trash-removing part geometry on the airflow in the rotor spinning unit and the yarn properties, Text. Res. J. 93(2022) 5–6.
Search in Google Scholar Back to article
X.Y. Zhu, X.P. Wang, J.S. Kou, S.Y. Sun, An energy stable incompressible SPH method with consistent solid boundary treatment, J. Comput. Appl. Math. 428(2023)115367.
Search in Google Scholar Back to article
J. Valášek, P. Sváček, On aerodynamic force computation in fluid–structure interaction problems - Comparison of different approaches, J. Comput. Appl. Math. 428(2023)115208.
Search in Google Scholar Back to article
L. Feldman, Theoretical trajectory studies of light bodies in non-uniform two-dimensional flows, Text. Res. J. 36(9) (1966)809–813.
Search in Google Scholar Back to article
L.H. Bangert, P.M. Sagdeo, On fiber alignment using fluid-dynamic forces, Text. Res. J. 47(12) (1977)773–780.
Search in Google Scholar Back to article
W.G. Nan, Y.S. Wang, H.P. Tang, A viscoelastic model for flexible fibers with material damping, Powder Technol. 276(2015) 175–182.
Search in Google Scholar Back to article
T. Sasayama, M. Inagaki, Efficient bead-chain model for predicting fiber motion during molding of fiber-reinforced thermoplastics, J. Non-Newtonian Fluid Mech. 264(2019)135–143.
Search in Google Scholar Back to article
S. Yamamoto, T. Matsuoka, A method for dynamic simulation of rigid and flexible fibers in a flow field, J. Chem. Phys. 98(1) (1993)644–650.
Search in Google Scholar Back to article
P. Skjetne, R.F. Ross, D.J. Klingenberg, Simulation of single fiber dynamics, J. Chem. Phys. 107(6) (1997)2108–2121.
Search in Google Scholar Back to article
Z.G. Pei, Y. Zhang, J. Zhou, A model for the particle-level simulation of multiple flexible fibers moving in a wall-bounded fluid flow, J. Fluids Struct. 80(2018) 37–38.
Search in Google Scholar Back to article
R.F. Ross, D.J. Klingenberg, Dynamic simulation of flexible fibers composed of linked rigid bodies, J. Chem. Phys. 106(7) (1997)2949–2960.
Search in Google Scholar Back to article
L.X. Kong, R.A. Platfoot, Computational two-phase air/fiber flow within transfer channels of rotor spinning machines, Text. Res. J. 67(4) (1997)269–278.
Search in Google Scholar Back to article
C.F. Schmid, L.H. Switzer, D.J. Klingenberg, Simulations of fiber flocculation: Effects of fiber properties and inter fiber friction, J. Rheol. 44(4) (2000)781–809.
Search in Google Scholar Back to article
Lindstrom S B, Uesaka T. Simulation of the motion of flexible fibers in viscous fluid flow, Phys. Fluids 19(11) (2007)113307–113322.
Search in Google Scholar Back to article
G.B. Jeffery, The motion of ellipsoidal particles immersed in a viscous fluid, Proc. R. Soc. A 102(715) (1922)161–179.
Search in Google Scholar Back to article
E. Anczurowski, S.G. Mason, The kinetics of flowing dispersions: II. Equilibrium orientations of rods and discs, J. Colloid Interface Sci. 23(4) (1967)522–532.
Search in Google Scholar Back to article
A.C. Smith, W.W. Roberts, Straightening of crimped and hooked fibers in converging transport ducts: computational modeling, Text. Res. J. 64(6) (1994)335–344.
Search in Google Scholar Back to article
F. Xu, D.Y. Li, P. Gao, W.Y. Zang, Z.D. Duan, J.P. Ou, Numerical simulation of two-dimensional transmission line icing and analysis of factors that influence icing, J. Fluids Struct. 118(2023)103858.
Search in Google Scholar Back to article
D. Kunhappan, B. Harthong, B. Chareyre, G. Balarac, P. J. J. Dumont, Numerical modeling of high aspect ratio flexible fibers in inertial flows, Phys. Fluids 29(9) (2017)093302.
Search in Google Scholar Back to article
R.H. Yang, C. He, B. Pan, H.X Zhong, C.D. Xu, Effect of position of the fiber transport channel on fiber motion in the high-speed rotor, Text. Res. J. 91(19–20) (2021)2294–2302.
Search in Google Scholar Back to article
A. Capone, G. P. Romano, Interactions between fluid and fibers in a turbulent backward-facing step flow, Phys. Fluids 27 (2015)053303.
Search in Google Scholar Back to article
H. Masoud, N.W. Mureithi, F.P. Gosselin, Large coupled bending and torsional deformation of an elastic rod subjected to fluid flow, J. Fluids Struct. 62(2016)367–383.
Search in Google Scholar Back to article
Y.Z. Jin, J.Y. Cui, X.D. Li, H.L, Chen. An investigation on the distribution of massive fiber granules in rotor spinning units, Text. Res. J. 87(7) (2017)865–877.
Search in Google Scholar Back to article
H. Berthet, M. Fermigier, A. Lindner, Single fiber transport in a confined channel: Microfluidic experiments and numerical study, Phys. Fluids 25(2013)103601.
Search in Google Scholar Back to article
M.N. Xiao, H.S. Dou, C.Y. Wu, Critical rotating speed of rotor cup in an air suction open-end spinning machine, Text. Res. J. 87(13) (2017)1593–1603.
Search in Google Scholar Back to article
S.V. Patanker, D.B. Spalding, A Calculation procedure for heat mass and momentum transfer in three dimensional parabolic flows, Int. J. Heat Mass Transf. 15(1972)1787–1806.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/ftee-2024-0031 | Journal eISSN: 2300-7354 | Journal ISSN: 1230-3666

Journal RSS Feed

Language: English

Page range: 1 - 12

Published on: Dec 16, 2024

Published by: Łukasiewicz Research Network, Institute of Biopolymers and Chemical Fibres

In partnership with: Paradigm Publishing Services

Publication frequency: Volume open

Keywords:

Fiber,

rotor spinning,

fiber transport channel,

air flow,

3D model

Related subjects:

Business and economics,

Business management,

Business informatics,

Process management,

Industrial chemistry,

Cellulose, paper and textiles,

Polymer science and technology,

Materials sciences,

Biomaterials and natural materials

© 2024 Ruihua Yang, Xinxia Gong, published by Łukasiewicz Research Network, Institute of Biopolymers and Chemical Fibres
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 32 (2024): Issue 6 (December 2024)