References
- Beaulieu, J., Dutilleul, P., 2019: Applications of computed tomography (CT) scanning technology in forest research: a timely update and review. Canadian Journal of Forest Research, 49:1173–1188.
- Boero, F., Fedeli, A., Lanini, M., Maffongelli, M., Monleone, R., Pastorino, M. et al., 2018: Microwave tomography for the inspection of wood materials: Imaging system and experimental results. IEEE Transactions on Microwave Theory and Techniques, 66:3497–3510.
- Buksnowitz, C., Müller, U., Evans, R., Teischinger, A., Grabner, M., 2008: The potential of SilviScan’s X–ray diffractometry method for the rapid assessment of spiral grain in softwood, evaluated by goniometric measurements. Wood Science and Technology, 42:95–102.
- Carter, P., 2017: Acoustic technology – Enhanced tools for research and operations. In: Proceedings of the 20th International Nondestructive Testing and Evaluation of Wood Symposium – 2017, Madison, WIS, USA, p. 12–15.
- Cown, D. J., 1978: Comparison of the Pilodyn and torsio-meter methods for the rapid assessment of wood density in living trees. New Zealand Journal of Forestry Science, 8:384–391.
- Downes, G. M., Lausberg, M., 2016: Evaluation of the RESI software tool for the prediction of HM200 within pine logs sourced from multiple sites across New Zealand and Australia. NZ Solid Wood Innov, 15 p.
- Faria, J., Martins, T., Ferreira, M., Santos, C., 2008: A computer vision system for color grading wood boards using fuzzy logic. In: IEEE International Symposium on Industrial Electronics – 2008, Cambridge,p. 1082–1087.
- Fuller, A. B., 1990: Microwaves: an introduction to microwave theory and techniques. Pergamon Press, 326 p.
- Gao, S., Wang, X., Wiemann, M. C., Brashaw, B. K., Ross, R. J., Wang, L., 2017: A critical analysis of methods for rapid and nondestructive determination of wood density in standing trees. Annals of Forest Science, 74:27.
- Gergeľ, T., Bucha, T., Gejdoš, M., Vyhnáliková, Z., 2019: Computed tomography log scanning–high technology for forestry and forest based industry. Central European Forestry Journal, 65:51–59.
- Grundberg, S., Grönlund, A., 1997: Simulated grading of logs with an x–ray log scanner-grading accuracy compared with manual grading. Scandinavian Journal of Forest Research, 12:70–76.
- Gupta, N. K., Hughes, S. H. C., Isaacson, B., 2004: Tangential CT, a computed tomography method developed for industrial inspection. In: 16th World Conference on Non-Destructive Testing – 2004, Montreal,37:379–384.
- Gupta, N. K., 1997: U.S. Patent No. 5,648,996. Washington, DC: U.S. Patent and Trademark Office, 13 p.
- Halabe, U. B., Agrawal, S., Gopalakrishnan, B., 2009: Nondestructive evaluation of wooden logs using ground penetrating radar. Nondestructive Testing and Evaluation, 24:329–346.
- Han, W., Birkeland, R., 1992: Ultrasonic scanning of logs. Industrial metrology, 2:253–281.
- Hansson, L., Couceiro, J., Fjellner, B. A., 2017: Estimation of shrinkage coefficients in radial and tangential directions from CT images. Wood Material Science & Engineering, 12:251–256.
- Hislop, G., Hellicar, A. D., Li, L., Greene, K., Lewis, C., Meder, R., 2009: Microwave radar for detection of resin defects in Pinus elliottii Engelm var elliottii. Holzforschung, 63:571–574.
- Hu, C., Tanaka, C., Ohtani, T., 2004: Locating and identifying sound knots and dead knots on sugi by the rule-based color vision system. Journal of Wood Science, 50:115–122.
- Ilic, J., 2001: Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R. Baker. Holz als Roh – und Werkstoff, 59:169–175.
- Jacquin, P., Mothe, F., Longuetaud, F., Billard, A., Kerfriden, B., Leban, J. M., 2019: CarDen: a software for fast measurement of wood density on increment cores by CT scanning. Computers and Electronics in Agriculture, 156:606–617.
- Jones, P. D., Schimleck, L. R., Peter, G. F., Daniels, R. F., Clark, A., 2006: Nondestructive estimation of wood chemical composition of sections of radial wood strips by diffuse reflectance near infrared spectroscopy. Wood Science and Technology, 40:709–720.
- Jol, H. M., 2008: Ground penetrating radar theory and applications. Elsevier, 544 p.
- Kasal, B., Drdacky, M., Jirovsky, I., 2003: Semi-destructive methods for evaluation of timber structures. In: WIT Transactions on the Built Environment – 2003, p. 835–842.
- Kloiber, M., Drdácký, M., Machado, J. S., Piazza, M., Yamaguchi, N., 2015: Prediction of mechanical properties by means of semi-destructive methods: A review. Construction and Building Materials, 101:1215–1234.
- Kloppenburg, A., 2018: Density determination of tropical hardwoods with the Resistograph–Diss. Master’s Thesis, Delft University of Technology, Delft, Netherlands, 80 p.
- Kowal, J., Karwat, B., Sioma, A., 2012: Using three-dimensional images in the description of environment and biological structures. Polish Journal of Environmental Studies, 21:227–232.
- Ku, G., Wang, L. V., 2001: Scanning microwave-induced thermoacoustic tomography: Signal, resolution, and contrast. Medical Physics, 28:4–10.
- Lenz, P., Auty, D., Achim, A., Beaulieu, J., Mackay, J., 2013: Genetic improvement of white spruce mechanical wood traits – early screening by means of acoustic velocity. Forests, 4:575–594.
- Lindström, H., Reale, M., Grekin, M., 2009: Using nondestructive testing to assess modulus of elasticity of Pinus sylvestris trees. Scandinavian Journal of Forest Research, 24:247–257.
- Liptai, R. G., Harris, D. O., Tatro, C. A., 1972: An introduction to acoustic emission. In: Acoustic Emission. ASTM International, p. 3–10.
- Llana, D. F., Hermoso, E., Bobadilla, I., Iñiguez-Gonzalez, G., 2018: Influence of moisture content on the results of penetration and withdrawal resistance measurements on softwoods. Holzforschung, 72:549–555.
- Longuetaud, F., Mothe, F., Santenoise, P., Diop, N., Dlouha, J., Fournier, M. et al., 2017: Patterns of within-stem variations in wood specific gravity and water content for five temperate tree species. Annals of Forest Science, 74: 64.
- McDonald, K. A., 1978: Lumber Defect Detection by Ultrasonics. Department of Agriculture, Forest Service, Forest products laboratory, Medison, WIS., 23 p.
- Meaney, P. M., Goodwin, D., Golnabi, A. H., Zhou, T., Pallone, M., Geimer, S. D. et al., 2012: Clinical microwave tomographic imaging of the calcaneus: A first-in-human case study of two subjects. IEEE Transactions on Biomedical Engineering, 59:3304–3313.
- Muller, W., 2003: Timber girder inspection using ground penetrating radar. Insight-Non-Destructive Testing and Condition Monitoring, 45:809–812.
- Nicolotti, G., Socco, L. V., Martinis, R., Godio, A., Sambuelli, L., 2003: Application and comparison of three tomographic techniques for detection of decay in trees. Journal of Arboriculture, 29:66–78.
- Oja, J., 1997: A comparison between three different methods of measuring knot parameters in Picea abies. Scandinavian Journal of Forest Research, 12:311–315.
- Österberg, P., 2009: Wood quality and geometry measurements based on cross section images - Diss. Thesis. Tampere University of Technology, Tampere, 192 p.
- Pastorino, M., Randazzo, A., Fedeli, A., Salvadè, A., Poretti, S., Maffongelli, M. et al., 2015: A microwave tomographic system for wood characterization in the forest products industry. Wood Material Science & Engineering, 10:75–85.
- Piazza, M., Riggio, M., 2008: Visual strength-grading and NDT of timber in traditional structures. Journal of Building Appraisal, 3:267–296.
- Pirouz, Z., 2015: Defect Detection Technology for Hard-wood Manufacturing, FP Innovations, 85 p.
- Rais, A., Ursella, E., Vicario, E., Giudiceandrea, F., 2017: The use of the first industrial X–ray CT scanner increases the lumber recovery value: case study on visually strength-graded Douglas-fir timber. Annals of Forest Science, 74:28.
- Riggio, M., Anthony, R. W., Augelli, F., Kasal, B., Lechner, T., Muller, W. et al., 2014: In situ assessment of structural timber using non-destructive techniques. Materials and Structures, 47:749–766.
- Rinn, F., Schweingruber, F. H., Schär, E., 1996: Resistograph and X–ray density charts of wood. Comparative evaluation of drill resistance profiles and X–ray density charts of different wood species. Holzforschung, 50:303–311.
- Rosenthal, A., Jetzfellner, T., Razansky, D., Ntziachristos, V., 2012: Efficient framework for model-based tomographic image reconstruction using wavelet packets. IEEE Transactions on Medical Imaging, 31:1346–1357
- Ross, R. J., Brashew, B. K., Pellerin, R. F., 1998: Nondestructive evaluation of wood. Forest Products Journal, 48:14.
- Ross, R. J., 2015: Nondestructive evaluation of wood: second edition. General Technical Report, Madison, WI: U.S. Forest Service, 169 p.
- Sandak, J., Tanaka, C., 2005: Evaluation of surface smoothness using a light-sectioning shadow scanner. Journal of Wood Science, 51:270–273.
- Sauter, U. H., Bruechert, F., Straudenmaier, J., 2017: Nondestructive Assessment of Wood Quality throughout Wood Supply Chain and Manufacturing Process In: Wang, X.; Senalik, C. A.; Ross, R. J., (eds.): 20th international nondestructive testing and evaluation of wood symposium. Madison, WI: US Department of Agriculture, Forest Service, Forest Products Laboratory, p. 8–13.
- Senalik, C. A., Wacker, J. P., Wang, X., Jalinoos, F., 2016: Assessing the ability of ground-penetrating radar to detect fungal decay in Douglas-fir beams. In: 25th ASNT Research Symposium – 2016, New Orleans, p. 110–116.
- Simic, K., Gendvilas, V., O’Reilly, C., Harte, A. M., 2019: Predicting structural timber grade-determining properties using acoustic and density measurements on young Sitka spruce trees and logs. Holzforschung, 73:139–149.
- Sioma, A., 2015: Assessment of wood surface defects based on 3D image analysis. Wood Research, 60:339–350.
- Schimleck, L., Dahlen, J., Apiolaza, L. A., Downes, G., Emms, G., Evans, R. et al., 2019: Non-destructive evaluation techniques and what they tell us about wood property variation. Forests, 10:728.
- Schimleck, L. R., Evans, R., Matheson, A. C., 2002: Estimation of Pinus radiata D. Don clear wood properties by near-infrared spectroscopy. Journal of Wood Science, 48:132–137.
- Schmoldt, D. L., Occeña, L. G., Lynn Abbott, A., Gupta, N. K., 1998: Nondestructive evaluation of hard-wood logs: CT scanning, machine vision and data utilization. Nondestructive Testing and Evaluation, 15:279–309.
- Sonka, M., Hlavac, V., Boyle, R., 2014: Image processing, analysis, and machine vision. Cengage Learning, 920 p.
- Stängle, S. M., Brüchert, F., Heikkila, A., Usenius, T., Usenius, A., Sauter, U. H., 2015: Potentially increased sawmill yield from hardwoods using X–ray computed tomography for knot detection. Annals of Forest Science, 72:57–65.
- Thomas, L., Mili, L., Thomas, E., Shaffer, C. A., 2007: Defect detection on hardwood logs using laser scanning. Wood and Fiber Science, 38:682–695.
- Thumm, A., Riddell, M., Nanayakkara, B., Harrington, J., Meder, R., 2010: Near infrared hyperspectral imaging applied to mapping chemical composition in wood samples. Journal of Near Infrared Spectroscopy, 18:507–515.
- Tiuri, M., Heikkilä, S., 1979: Microwave Instrument for Accurate Moisture Measurement of Timber. In: 9th European Microwave Conference – 1979, Brighton, p. 702–705
- Wang, X., Ross, R. J., 2002: Non-destructive Evaluation of Green Materials – Recent Research and Development Activities. In: Nondestructive evaluation of wood. Forest Products Society, Madison, p. 149–171.
- Wang, X., Divos, F., Pilon, C., Brashaw, B. K., Ross, R. J., Pellerin, R. F., 2004: Assessment of decay in standing timber using stress wave timing nondestructive evaluation tools. US Department of Agriculture, Forest Products Laboratory, Technical Report, 147 p.
- Wang, J., Zhao, Z., Song, J., Nie, Z. P., Liu, Q. H., 2013: Reconstruction of microwave absorption of multiple tumors in heterogeneous tissue for microwave-induced thermo-acoustic tomography. Progress, Electromagnetics Research, 32:57–72.
- Wen, J., Gao, L., Xiao, X., Xiao, Z., Li, C., 2016: Detection and measurement of internal defects for treetrunk by GPR. International Journal of Simulation: Systems, Science and Technology, 17:9–1.
- Zhang, D., He, H., Zong, C., Liu, Y., 2019: Microwave-induced thermoacoustic imaging of wood: a first demonstration. Wood Science and Technology, 53:1223–1234.
- FAKOPP., 2020: Manual for the ArborSonic3D acoustic tomograph. [Brochure], Available at: https://fakopp.com/en/product/arborsonic/
- Microtec, 2019: CT Log Computed Tomography for the sawmill of the future. [Brochure], Available at: https://microtec.eu/assets/products/ctlog/MT-CT-Log2.pdf
- Sensors & Software. 2016: pulseEKKO - For the GPR Professional [Brochure], Available at: https://www.sensoft.ca/wp-content/uploads/2016/02/pulseEKKO-Brochure.pdf
- Ward, C., 2014: SilviScan™ rapid wood analysis, CSIROpedia. Available at: https://csiropedia.csiro.au/SilviScan-rapid-wood-analysis/ry